B82412A3100M000 EPCOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

 EPCOS AG 2008. Reproduction, publication and di ssemination of this publication , enclosures hereto and the information contained therein without EPC OS’ prior express consent is prohibited. SMT inductors SIMID series, SIMID 1210-01 Series/Type: B82412A Date: March 2008

Please read Cautions and warnings and Important notes at the end of this document. Size 1210 (EIA) or 3225 (IEC) Rated inductance 0.010 µH to 10 µH Rated current 90 mA to 700 mA Construction ■ Ceramic or ferrite core ■ Single-layer winding fixed by glue ■ Ultrasonic-welded winding

Features

■ Low height ■ High Q factor ■ High resonance frequency ■ Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020C ■ RoHS-compatible

Applications

■ Filtering of supply voltages, coupling, decoupling ■ Antenna systems ■ Infotainment ■ Telecommunications ■ Industrial electronics Terminals ■ Base material CuSn6 ■ Layer composition Cu, Ag (lead-free) ■ Electro-plated Marking ■ No marking on component ■ Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing units ■ 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel ■ Packing units: 180-mm reel: 2500 pcs./reel 330-mm reel: 10000 pcs./reel B82412ASMT inductors, SIMID series SIMID 1210-01

Please read Cautions and warnings and Important notes at the end of this document. Dimensional drawing and layout recommendation Taping and packing Blister tape Reel Dimensions in mm IND0053-6 C D B A B 1.6 0.1±0.05 2.8 3.2+0.3 1) Soldering area 0.6±0.1 2.5±0.2 IND0052-V-E 0.2 min.1) 0.25 min. _0.3 0.8 1.8 0.3_ 1) AB C D 2.7 1.15 2.1 4.4 Dimensions in mm IND0592-V 62±1.5 14.4 max. +1.58.4 0_ 180+0_2 330 2 +0_ 12.75+0.15 _< 4.2 Component 1.5+0.1 2±0.05 4±0.1 3.5±0.05 1.75±0.1 8±0.3 4±0.1 Direction of unreeling IND0570-T-E 1.0+0.22.0<_ B82412ASMT inductors, SIMID series SIMID 1210-01

Please read Cautions and warnings and Important notes at the end of this document. Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A at frequency fL, 0.1 V, 20 °C Q factor Qmin Measured with impedance analyzer Agilent 4294A at frequency f Q, 20 °C Rated temperature TR 85 °C Rated current IR Maximum permissible DC with inductance decrease ∆L/L 0 ≤ 10% and temperature increase of ≤ 20 K at rated temperature Self-resonance frequency fres,min Measured with network analyzer Agilent 8753D, 20 °C DC resistance Rmax Measured at 20 °C Solderability (lead-free) Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s Wetting of soldering area ≥ 95% (based on IEC 60068-2-58) Resistance to soldering heat 260 °C, 40 s (as referenced in JEDEC J-STD 020C) Climatic category 55/125/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +125 °C Packaged: –25 °C … +40 °C, ≤ 75% RH Weight Approx. 40 mg B82412ASMT inductors, SIMID series SIMID 1210-01

Please read Cautions and warnings and Important notes at the end of this document. Characteristics and ordering codes Closer tolerances and special versions on request. 1) Replace the + by the code letter fo r the required induc tance tolerance. For reel size ∅ 330 mm the last digit has to be an »8«. Example: B82412A3100M008 LR µH Tolerance f L MHz Qmin fQ MHz IR mA Rmax Ω fres,min MHz Ordering code1) (∅ 180-mm reel) Core material: ceramic 0.010 ±20% M 10 25 100 700 0.10 4000 B82412A3100M000 0.012 10 25 100 700 0.10 3500 B82412A3120M000 0.015 10 25 100 640 0.12 3000 B82412A3150M000 0.018 10 30 100 640 0.12 2700 B82412A3180M000 0.022 ±5% J ±10% K 10 30 100 600 0.12 2400 B82412A3220+000 0.027 10 20 50 600 0.15 2200 B82412A3270+000 0.033 10 25 50 540 0.17 2000 B82412A3330+000 0.039 10 25 50 500 0.18 1700 B82412A3390+000 0.047 10 25 50 470 0.22 1600 B82412A3470+000 0.056 10 30 50 460 0.23 1400 B82412A3560+000 0.068 10 30 50 440 0.25 1350 B82412A3680+000 0.082 10 30 50 430 0.27 1100 B82412A3820+000 0.10 10 30 50 400 0.30 1000 B82412A3101+000 0.12 1 25 30 380 0.35 900 B82412A3121+000 0.15 1 25 30 370 0.36 820 B82412A3151+000 0.18 1 25 30 340 0.42 700 B82412A3181+000 0.22 1 25 30 320 0.48 630 B82412A3221+000 0.27 1 30 30 300 0.55 570 B82412A3271+000 0.33 1 30 30 280 0.65 550 B82412A3331+000 0.39 1 30 30 260 0.75 500 B82412A3391+000 0.47 1 30 30 225 1.00 450 B82412A3471+000 0.56 1 30 30 200 1.20 430 B82412A3561+000 0.68 1 30 30 180 1.40 400 B82412A3681+000 0.82 1 30 30 150 2.00 380 B82412A3821+000 B82412ASMT inductors, SIMID series SIMID 1210-01

Please read Cautions and warnings and Important notes at the end of this document. Characteristics and ordering codes Closer tolerances and special versions on request. 1) Replace the + by the code letter fo r the required induc tance tolerance. For reel size ∅ 330 mm the last digit has to be an »8«. Example: B82412A1102M008 LR µH Tolerance f L MHz Qmin fQ MHz IR mA Rmax Ω fres,min MHz Ordering code1) (∅ 180-mm reel) Core material: ferrite 1.0 ±5% J ±10% K 1 30 7.96 330 0.45 300 B82412A1102+000 1.2 1 30 7.96 310 0.50 260 B82412A1122+000 1.5 1 30 7.96 300 0.55 240 B82412A1152+000 1.8 1 30 7.96 290 0.60 220 B82412A1182+000 2.2 1 30 7.96 270 0.65 200 B82412A1222+000 2.7 1 30 7.96 220 1.05 180 B82412A1272+000 3.3 1 30 7.96 200 1.10 160 B82412A1332+000 3.9 1 30 7.96 190 1.35 150 B82412A1392+000 4.7 1 35 7.96 160 1.80 140 B82412A1472+000 5.6 1 35 7.96 140 2.70 125 B82412A1562+000 6.8 1 35 7.96 120 3.50 115 B82412A1682+000 8.2 1 35 7.96 110 3.80 100 B82412A1822+000 10 1 35 7.96 90 5.50 95 B82412A1103+000 B82412ASMT inductors, SIMID series SIMID 1210-01

Impedance |Z| versus frequency f measured with impedance analyzer Agilent 4291A, typical values at 20 °C Q factor versus frequency f measured with impedance analyzer Agilent 4194A/4291A, typical values at 20 °C Inductance L versus DC load current I DC measured with LCR meter Agilent 4275A, typical values at 20 °C Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 85 °C) 106 107 Hz108 f 109 IND0054-8 10 µH 10 nH 100 nH 1 µH 100 101 102 103 104 Ω B82412A Z|| IND0056-9 Q 105 f Hz106 107 108 109 1 µH 10 µH 0.1 µH 0.022 µH 100 B82412A IND0055-W L I 10 10 0 101A µH DC 010 110 210 0.1 µH 0.022 µH 1 µH 0.68 µH 6.8 µH 10.0 µH B82412A IND0057-H-E 0.2 0.4 0.6 0.8 1.0 1.2 20 40 60 80 100 140 IR opI AT B82412A B82412ASMT inductors, SIMID series SIMID 1210-01

■ Please note the recommendations in our Induct ors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observ ed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possib le for washing varnish agent residues to have a negative effect in the long-term on wire insulation. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. Th ey therefore exert a pressure on the plastic housing or core. This pressure can have a delete rious effect on electr ical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. ■ Ferrites are sensitive to direct impact. This c an cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products , conclusive validation of the component in the circuit can only be carried out by the customer. Please read Cautions and warnings and Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical requirements that are often placed on our produc ts in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must ther efore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or dam age is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, Phas eCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.