B82131A5151M000 TDK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Series/Type: B82131, B82132, B82133, B82134 Date: June 2012  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

Please read Cautions and warnings and Important notes at the end of this document. Rated voltage 500 V AC/DC Rated current 0.15 ... 6 A Rated inductance 1 ... 420 μH Construction ■ Cylinder core of carbonyl iron ■ Winding: single-layer, enamel copper wire ■ Polyester insulating sleeve

Features

■ High resonant frequency ■ Design complies with EN 60938 ■ Suitable for wave soldering ■ RoHS-compatible

Applications

■ RF blocking and filtering ■ Interference suppression in small appliances ■ Decoupling in telecommunications and entertainment electronics Terminals ■ Central axial leads ■ Base material Cu ■ Hot-dip tinned with pure tin Marking LR and IR in clear text Delivery mode and packing units ■ Taped and reeled ■ Packing units: Series Pcs./reel B82131, B82132 2000 B82133, B82134 1000 B82131 … B82134VHF chokes

Please read Cautions and warnings and Important notes at the end of this document. Dimensional drawing Dimensions in mm Reel packing Dimensions in mm Lead spacing emin (mm) Type 17.5 22.5 27.5 32.5 B82131 B82132 B82133 B82134IND0144-Z-E 1_73 l max. d max. ø0.8 k max. 9±0.5 *)*) *) Tolerance over 10 spacings ±2 mm IND0145-U e min. IND0451-4-E ø360 _1 95+1 107 max. ø30.5±0.15 ø126+1 ø133

30 Label

B82131 … B82134VHF chokes

Please read Cautions and warnings and Important notes at the end of this document. Technical data and measuring conditions Mounting information When bending the leads, take care that the bending point is at least 3 mm apart from the face ends of the core and that the start-of-winding areas are not subjected to any mechanical stress. Test voltage Vtest 2500 V AC, 1 min Rated inductance LR Measured with LCR meter Agilent 4284A or impedance analyzer Agilent 4294A Measuring frequency: L R d 10 PH= 1 M H z

10 PH < LR d 1000 PH = 100 kHz

Measuring voltage: 1 V Measuring temperature: +20 °C Inductance tolerance r20% Rated temperature TR +60 °C Rated current IR Maximum permissible DC current at rated temperature DC resistance Rtyp Measured at +20 qC, tolerance r20%, typical values Resonance frequency fres Measured with Agilent 4294A or 8753ES, +20 °C, tolerance r30% Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (3 r0.3) s Wetting of soldering area t90% (to IEC 60068-2-20, test Ta) Resistance to soldering heat (wave soldering) +(260 r5) qC, 10 s (to IEC 60068-2-20, test Tb) Tensile strength of leads t30 N (to IEC 60068-2-21, test Ua) Climatic category 55/125/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +125 °C Packaged: –25 °C … +40 °C, d75% RH B82131 … B82134VHF chokes

Please read Cautions and warnings and Important notes at the end of this document. Characteristics and ordering codes IR A LR PH Rtyp fres MHz Dimensions (mm) Approx. weight g Ordering code dmax lmax kmax emin 0.15 80 11 22 5 15 16.4 17.5 0.8 B82131A5151M000 160 17 20 5.5 20 21.4 22.5 0.9 B82132A5151M000 350 21 11 7.5 25 26.4 27.5 2.3 B82133A5151M000 420 19 12 7.5 30 31.4 32.5 2.6 B82134A5151M000 2 3 0.09 113 5 15 16.4 17.5 0.8 B82131A5202M000 3 2 0.038 147 5 15 16.4 17.5 1.0 B82131A5302M000 4 1 0.014 199 5 15 16.4 17.5 1.1 B82131A5402M000 B82131 … B82134VHF chokes

Impedance |Z| versus frequency f measured with impedance analyzer Agilent 4294A or S-parameter network analyzer Agilent 8753ES, typical values at +20 °C B82131A5*M000 B82133A5*M000 B82132A5*M000 B82134A5*M000 IND0146-1 106 f 107 108 109Hz Z|| 100 Ω A5402 110 210 310 410 510 610 A5302 A5202 A5152 A5701 A5151 A5301 A5401 B82131 IND0148-6 106 f 107 108 109Hz Z|| 100 Ω 110 210 310 410 510 610 A5151 A5301 A5701 A5401 A5302 A5402 A5202 A5152 B82133 IND0147-5 106 f 107 108 109Hz Z|| 100 Ω 110 210 310 410 510 610 A5151 A5301 A5401 A5701 A5202 A5152 A5402 A5302 B82132 IND0149-9 106 f 107 108 109Hz Z|| 100 Ω 110 210 310 410 510 610 A5152 A5202 A5302 A5401 A5701 A5301 A5151 B82134 B82131 … B82134VHF chokes

versus ambient temperature TA (rated temperature TR = +60 °C) IND0143-T-E TA 20 40 60 80 100 140 0.2 0.4 0.6 0.8 1.0 1.2 IR opI B82131 … B82134VHF chokes

■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. ■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Please read Cautions and warnings and Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.