B82131 EPCOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

/c37/c66/c85/c66/c1/c52/c73/c70/c70/c85 Chokes and inductors VHF chokes Series/Type: B82131 ... B82134 Date: November 2005 © EPCOS AG 2005. Reproduction, publication and dissemination of this document and the infor- mation contained therein without EPCOS’ prior express consent is prohibited.

B82131 ... B82134 Please read the Important notes at the end of this document. Rated voltage 500 VAC/DC Rated current 0.15 to 6 A Rated inductance 1 to 420 /c78 H Construction ■ Cylinder core of carbonyl iron ■ Winding: single-layer, enamel copper wire ■ Polyester insulating sleeve

Features

■ High resonant frequency ■ RoHS-compatible1)

Applications

■ RF blocking and filtering ■ Interference suppression in small appliances ■ Decoupling in telecommunications and entertainment electronics Marking LR and IR in clear text Delivery mode Taped and reeled (for packing and packing units see page 6). Dimensional drawing 1) RoHS-compatible is defined as compatible with the following documents: DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 February 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment COM (2004) 606 final Proposal for a COUNCIL DECISION amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment. IND0144-Z-E 1_73 max. d max. ø0.8 k max. 9±0.5 *)*) *) Tolerance over 10 spacings ± 2 mm Lead spacing emin (mm) Type 17.5 22.5 27.5 32.5 B82131 B82132 B82133 B82134 IND0145-U min.e

VHF chokes B82131 ... B82134 Carbonyl iron core Please read the Important notes at the end of this document. General technical data Test voltage Vtest 2500 VAC, 1 min Rated inductance LR Measuring frequency:L ≤ 10 μH= 1 M H z 10 μH < L ≤ 1000 μH = 100 kHz Inductance tolerance ±20% Rated current IR Referred to 60 °C ambient temperature, for derating see below Inductance decrease ΔL/L0 ≤10% (referred to initial value) at DC load IR at 20 °C DC resistance Rtyp Typical value, measured at 20 °C ambient temperature Resonance frequency fres, min Typical value, measured with Scalar Network Analyzer ZAS from Rohde & Schwarz Climatic category (IEC 60068-1) 55/125/56 (–55 °C/+125 °C/56 days damp heat test) Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 60 °C) Mounting information When bending the leads, take care that the bending point is at least 3 mm apart from the face ends of the core and that the start-of-winding-areas are not subject- ed to any mechanical stress. SSB0087-Q-E opI RI TA 20 40 60 80 100 ˚C 140 0.2 0.4 0.6 0.8 1.0 1.2

B82131 ... B82134 Please read the Important notes at the end of this document. Characteristics and ordering codes IR A LR μH Rtyp Ω fres MHz Dimensions (mm) Approx. weight g Ordering code dmax lmax kmax emin 0.15 80 11 22 5 14 15.4 17.5 0.8 B82131A5151M000 160 17 20 5.5 19 20.4 22.5 0.9 B82132A5151M000 350 21 11 7.5 24 25.4 27.5 2.3 B82133A5151M000 420 19 12 7.5 29 30.4 32.5 2.6 B82134A5151M000 2 3 0.09 113 5 14 15.4 17.5 0.8 B82131A5202M000 3 2 0.038 147 5 14 15.4 17.5 1.0 B82131A5302M000 4 1 0.014 199 5 14 15.4 17.5 1.1 B82131A5402M000

B82131 ... B82134 Please read the Important notes at the end of this document. Impedance |Z| versus frequency f measured as per VDE 0565-2 (typical values) B82131A5*M000 B82133A5*M000 B82132A5*M000 B82134A5*M000 IND0146-1 106 f 107 108 109Hz Z|| 100 Ω A5402 110 210 310 410 510 610 A5302 A5202 A5152 A5701 A5151_ A5301_ A5401_ B82131 IND0148-6 106 f 107 108 109Hz Z|| 100 Ω 110 210 310 410 510 610 A5151_ A5301_ A5701 A5401_ A5302 A5402 A5202 A5152 A5602_ B82133 IND0147-5 106 f 107 108 109Hz Z|| 100 Ω 110 210 310 410 510 610 A5151_ A5301_ A5401_ A5701 A5202 A5152_ A5402 A5602 A5302_ B82132 IND0149-9 106 f 107 108 109Hz Z|| 100 Ω 110 210 310 410 510 610 A5402_ A5152 A5202 A5302 A5401 A5701_ A5301 A5151_ B82134

B82131 ... B82134 Please read the Important notes at the end of this document. Packing Reel packing for B82131 ... B82134 Packing units Type Pieces/reel B82131 2000 B82132 2000 B82133 1000 B82134 1000 IND0451-4Etikett 1ø360 _ ø30.5±0.15 ø126+1 ø133 95+1 107 max. Label

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical require- ments that are often placed on our products in the areas of application concerned. We neverthe- less expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCO S product with the properties described in the product specification is suitable for us e in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications re- quiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electr onic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suit- able design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed . 4. In order to satisfy certain technical requirements, some of the products described in this pub- lication may contain substances subject to restrictions in certain jurisdictions (e.g. be- cause they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still appl icable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequent- ly, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP, P haseCap, PhaseMod, SilverCap, SIFI, SIMID, SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.