B81130-B1223

B81130 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

I Parallel wire leads, tinned I Two standard lead lengths available: 6 mm und 26 mm Other lead lengths available upon request. Marking Manufacturer’s logo and lot number date code, rated capacitance (coded), capacitance tolerance (code letter), rated ac voltage, type number, interference suppression sub-class (X2), style (MKP), climatic category, awarded marks of conformity. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter “Taping and packing”, page 274. 1) Not for 1,5 and 2,2 µF Marks of conformity Marks of conformity Standards Certificate EN 132400 / IEC 384-14, 2nd edition UL 1414 (VR = 250 Vac) Approved by UL according to CSA C22.2 No. 0; 1 (VR = 250 Vac) 18643-4670-1010/A1G E97863/97NK11940A E97863/97NK11940A Lead spacing ± 0,4 Lead diameter ∅d (mm) Lead length l1 (mm) 10 mm 0,6 6 – 1 — ≥ 15 mm 0,8 6 – 1 26 ± 2 KMK0571-2 AAAAA XX-µ1 B81130 X2 MKP/SH 40/100/21/C VED M 275V~ C1104

250 V~IEC 384-14(2) 250 V~

M 275V~ C1103 KMK0699-I AAAAA XX-1µ5 B81130 X2 MKP/SH 40/100/21/C VED M 275V~ C1155 IEC 384-14(2) 250 V~ Lead spacing ≥ 15 mm (22 nF ... 1,0 µF) Lead spacing = 10 mm Lead spacing = 27,5 mm (1,5 and 2,2 µF) B8 11 3 0EMI Suppression Capacitors X2 / 275 Vac

Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K (closer tolerances upon request) Ordering codes and packing units Lead spacing ± 0,4 mm CR Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) Ammo pack Reel Untaped Lead length 6m m 2 6m m 10 10 nF 4,0 × 9,0 × 13,0 B81130-C1103-+ * 1000 1700 1000 — 15 nF 4,0 × 9,0 × 13,0 B81130-C1153-+ * 1000 1700 1000 — 22 nF 5,0 × 11,0 × 13,0 B81130-C1223-+ * 830 1300 1000 — 33 nF 5,0 × 11,0 × 13,0 B81130-C1333-M * 830 1300 1000 — 33 nF 6,0 × 12,0 × 13,0 B81130-A1333-+ * 680 1100 1000 — 47 nF 6,0 × 12,0 × 13,0 B81130-C1473-+ * 680 1100 1000 — 15 22 nF 5,0 × 10,5 × 18,0 B81130-B1223-+ * 1170 1300 1000 1000 33 nF 5,0 × 10,5 × 18,0 B81130-B1333-+ * 1170 1300 1000 1000 47 nF 5,0 × 10,5 × 18,0 B81130-B1473-+ * 1170 1300 1000 1000 68 nF 6,0 × 11,0 × 18,0 B81130-C1683-+ * 960 1100 1000 1000 0,10 µF6 , 0 × 12,0 × 18,0 B81130-C1104-M * 960 1100 1000 1000 0,10 µF 7,0 × 12,5 × 18,0 B81130-A1104-+ * 830 900 1000 800 0,15 µF8 , 5 × 14,5 × 18,0 B81130-C1154-+ * 680 700 500 500 0,22 µF9 , 0 × 17,5 × 18,0 B81130-C1224-+ * 640 700 500 500 22,5 0,15 µF6 , 0 × 15,0 × 26,5 B81130-B1154-+ * 680 700 720 500 0,22 µF7 , 0 × 16,0 × 26,5 B81130-B1224-+ * 580 600 630 500 0,33 µF8 , 5 × 16,5 × 26,5 B81130-C1334-+ * 480 500 510 450 0,47 µF 10,5 × 16,5 × 26,5 B81130-C1474-M * 390 400 540 350 0,47 µF 10,5 × 18,5 × 26,5 B81130-A1474-+ * 390 400 540 300 0,68 µF 11,0 × 20,5 × 26,5 B81130-C1684-M * 370 350 510 300 27,5 0,47 µF 11,0 × 21,0 × 31,5 B81130-B1474-+ * — 350 320 200 0,68 µF 11,0 × 21,0 × 31,5 B81130-B1684-+ * — 350 320 200 1,0 µF 12,5 × 21,5 × 31,5 B81130-C1105-M * — 300 280 200 1,0 µF 13,5 × 23,0 × 31,5 B81130-A1105-+ * — 250 260 150 1,5 µF 15,0 × 24,5 × 31,5 B81130-C1155-M * — — 240 150 1,5 µF 18,0 × 27,5 × 31,5 B81130-A1155-+ * — — 200 100 2,2 µF 18,0 × 27,5 × 31,5 B81130-C1225-M * — — 200 100 2,2 µF 19,0 × 30,0 × 31,5 B81130-A1225-+ * — — 180 100 1) Replace the + by the code letter for the required capacitance tolerance. Replace the *** by the code number for the required lead length or packing. 000 = lead length 6 mm (untaped) 026 = lead length 26 mm (untaped) 289 = taped, Ammo pack 189 = taped, reel

275 Vac

in accordance with IEC 60068-1 40/100/21 Lower category temperature Tmin Upper category temperature Tmax − 40 °C + 100 °C Passive flammability category in accordance with IEC 40 (CO) 752 C Damp heat test 21 days/40 °C/93 % relative humidity Limit values after damp heat test Capacitance change |∆C/C| ≤ 3 % Dissipation factor change ∆ tan δ≤ 0,5 ⋅ 10−3 (at 1 kHz) ≤ 1,0 ⋅ 10−3 (at 10 kHz) Insulation resistance Ris ≥ 50 % of minimum or time constant τ = CR ⋅ Ris as-delivered values Permissible continuous ac voltage

275 V (50/60 Hz)

Permissible continuous dc voltage 560 V DC test voltage 2121 V, 2 s Dissipation factor tan δ (in 10−3) at 20 °C (upper limit values) Insulation resistance Ris or time constant τ = CR ⋅ Ris at 20 °C, rel. humidity ≤ 65 % (minimum as-delivered values) Impedance Z versus frequency f (typical values) CR ≤ 0,1 µF0 , 1 µF < CR ≤ 1 µF CR > 1 µF at 1 kHz 1,0 1,0 1,0 100 kHz 5 10 13 CR ≤ 0,33 µF CR > 0,33 µF

100 GΩ 30 000 s

Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth). For Vpp < VˆR, the permissible voltage rise rate Vpp/τ may be multiplied by the factor VˆR/Vpp. Also refer to the calculation example in chapter “General technical information”, page 302. VR Max. rate of voltage rise Vpp/τ in V/µs (for Vpp = VˆR) Lead spacing 10 mm 15 mm 22,5 mm 27,5 mm

275 Vac 290 110 50 30

VR Pulse characteristic k0 in V2/µs (for Vpp ≤ VˆR) Lead spacing 10 mm 15 mm 22,5 mm 27,5 mm

275 Vac 220 000 80 000 35 000 21 000

Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND  EPCOS AG 2000. Alle Rechte vorbehalten. Vervielf ältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Brosch üre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Lieferm öglichkeiten richten Sie bitte an den Ihnen n ächstgele- genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k önnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Ausk ünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge- sellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro- chure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be con- sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.