B81123 EPCOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

EMI Suppression Capacitors (MKP) Series/Type: B81123 Date: June 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Y1 class for interference suppression "Line to ground" applications Climatic Max. operating temperature: 100 °C Climatic category (IEC 60068-1): 40/100/21 Construction Dielectric: polypropylene (MKP) Internal series connection Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0)

Features

Parallel wire leads, lead-free tinned Standard lead lengths: 6 1 mm Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), cap. tolerance (code letter), rated AC voltage, series number, sub-class (Y1), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing". Dimensional drawing Dimensions in mm Lead spacing ±0.4 Lead diameter d1 15 mm, 22.5 mm 0.8 Marking example Approvals Marks of conformity Standards Certificate EN 132400, IEC 60384-14 138584 UL 1414 (double protection) E97863 EMI suppression capacitors (MKP) B81123 Y1 / 250 VAC Page 2 of 6 PleasereadImportant notes at theendof thisdocument.

Overview of available types Lead spacing 15 mm 22.5 mm CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0056 0.0068 0.010 Ordering codes and packing units Lead spacing mm CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) (Closer tolerances on request) 0.0010 5.0 × 10.5 × 18.0 B81123C1102M* 1170 1300 1000 0.0015 6.0 × 11.0 × 18.0 B81123C1152M* 960 1100 1000 0.0022 7.0 × 12.5 × 18.0 B81123C1222M* 830 900 1000 0.0033 8.5 × 14.5 × 18.0 B81123C1332M* 680 700 500 0.0047 9.0 × 17.5 × 18.0 B81123C1472M* 640 700 500 22.5 0.0056 7.0 × 16.0 × 26.5 B81123C1562M* 580 600 630 0.0068 8.5 × 16.5 × 26.5 B81123C1682M* 480 500 510 0.010 10.5 × 16.5 × 26.5 B81123C1103M*** 390 400 540 B81123 Y1 / 250 VAC Page 3 of 6 PleasereadImportant notes at theendof thisdocument.

Max. operating temperature Top,max +100 °C Dissipation factor tan δ (in 10-3) at 1 kHz at 20 °C (upper limit values) 100 kHz Insulation resistance Rins 30 000 MΩ or time constant τ = CR Rins at 20 °C, rel. humidity ≤65% (minimum as-delivered values) DC test voltage

4800 V, 2 s

Passive flammability category to IEC 40 (CO) 752 C Maximum continuous AC voltage VAC

750 V (50/60 Hz)

Rated AC voltage (IEC 60384-14)

250 V (50/60 Hz)

Maximum continuous DC voltage VDC 3000 V Operating AC voltage Vop at high TA ≤100 °C Vop = VAC (continuously) temperature TA ≤100 °C Vop = 1.25 VAC (1000 h) Damp heat test 21 days / 40 °C / 93% relative humidity Limit values after damp heat test Capacitance change ∆C/C ≤5% Dissipation factor change ∆tan δ ≤0.5 10-3 (at 1 kHz) Insulation resistance Rins ≤1.0 10-3 (at 100 kHz) or time constant τ = CR Rins ≥50% of minimum as-delivered values B81123 Y1 / 250 VAC Page 4 of 6 PleasereadImportant notes at theendof thisdocument.

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing 15 mm 22.5 mm dV/dt in V/µs 3 000 1 000 k0 in V2/µs 2 100 000 700 000 Impedance Z versus frequency f (typical values) B81123 Y1 / 250 VAC Page 5 of 6 PleasereadImportant notes at theendof thisdocument.

The following applies to all products named in this publication: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order.We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Important notes Page 6 of 6