B81122C1562M

B81122 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

EMI Suppression Capacitors (MKP) Series/Type: B81122 Date: August 2004 © EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Associ- ation), unless otherwise agreed.

Y2 class for interference suppression "Line to ground" applications Climatic Max. operating temperature: 100 °C Climatic category (IEC 60068-1): 40/100/21 = 10 mm 40/085/21 ≥ 15 mm Construction Dielectric: polypropylene (MKP) Internal series connection (for ≥15 mm) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0)

Features

Parallel wire leads, lead-free tinned Standard lead lengths: 6 1 mm Special lead lengths available on request Marking Manufacturer's logo, lot number, date code, rated capacitance (coded), cap. tolerance (code letter), rated AC voltage, series number, sub-class (Y2), dielectric code (MKP), climatic category, passive flammability category, approvals. Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For taping details, refer to chapter "Taping and packing". Dimensional drawing Dimensions in mm Lead spacing ±0.4 Lead diameter d1 10 mm 0.6 Marking example Approvals Marks of conformity Standards Certificate EN 132400, IEC 60384-14 138600 ( = 10 mm) 138603 ( ≥ 15 mm) UL 1414 E97863 CSA C22.2 No.1 E97863 EMI suppression capacitors (MKP) B81122 Y2 / 250 VAC

Overview of available types Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0056 0.0068 0.010 0.015 0.022 0.027 0.033 0.047 0.056 0.068 0.10 0.15 0.22 0.33 B81122 Y2 / 250 VAC

Ordering codes and packing units Lead spacing mm CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 10 0.0010 4.0 × 9.0 × 13.0 B81122C1102M* 1000 1700 1000 0.0015 4.0 × 9.0 × 13.0 B81122C1152M* 1000 1700 1000 0.0022 5.0 × 11.0 × 13.0 B81122C1222M* 830 1300 1000 0.0033 5.0 × 11.0 × 13.0 B81122C1332M* 830 1300 1000 0.0047 6.0 × 12.0 × 13.0 B81122C1472M* 680 1100 1000 0.0056 6.0 × 12.0 × 13.0 B81122C1562M* 680 1100 1000 0.0068 6.0 × 12.0 × 13.0 B81122C1682M* 680 1100 1000 15 0.010 6.0 × 11.0 × 18.0 B81122A1103M* 960 1100 1000 0.015 7.0 × 12.5 × 18.0 B81122A1153M* 830 900 1000 0.022 8.5 × 14.5 × 18.0 B81122A1223M* 680 700 500 0.027 8.5 × 14.5 × 18.0 B81122A1273M* 680 700 500 0.033 9.0 × 17.5 × 18.0 B81122A1333M* 640 700 500 0.056 8.5 × 16.5 × 26.5 B81122A1563M* 480 500 510 0.068 10.5 × 16.5 × 26.5 B81122A1683M* 390 400 540 0.10 10.5 × 20.5 × 26.5 B81122A1104M* 390 400 540 0.22 13.5 × 23.0 × 31.5 B81122A1224M* 250 260 0.33 18.0 × 27.5 × 31.5 B81122A1334M* 200 B81122 Y2 / 250 VAC

Max. operating temperature Top,max +100 °C Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) CR ≤ 0.1 µF CR >0.1 µF at 1 kHz 1.0 1.0 100 kHz 5.0 Insulation resistance Rins 30 000 MΩ or time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 2700 V, 2 s ( ≥ 15 mm)

2500 V, 2 s ( = 10 mm)

Passive flammability category to IEC 40 (CO) 752 C Maximum continuous AC voltage (VAC) 405 V (50/60 Hz) ( ≥ 15 mm)

305 V (50/60 Hz) ( = 10 mm)

Rated AC voltage (IEC 60384-14) 250 V (50/60 Hz) Maximum continuous DC voltage (VDC) 1000 V ( ≥ 15 mm)

1200 V ( = 10 mm)

Operating AC voltage Vop at high temperature TA ≤ 100 °C Vop = VAC (continuously) TA ≤ 100 °C Vop = 1.25 VAC (1000 h) Damp heat test 21 days / 40 °C / 93% relative humidity Limit values after damp heat test Capacitance change ΔC/C ≤ 5% Dissipation factor change Δ tan δ ≤ 0.5 10-3 (at 1 kHz) Insulation resistance Rins ≤ 1.0 10-3 (at 10 kHz) or time constant τ = CR Rins ≥ 50% of minimum as-delivered values B81122 Y2 / 250 VAC

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt and k0 values Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm dV/dt in V/µs 550 400 200 150 k0 in V2/µs 388 000 282 000 141 000 106 000 B81122 Y2 / 250 VAC

Impedance Z versus frequency f (typical values) Lead spacing = 10 mm Lead spacing ≥15 mm B81122 Y2 / 250 VAC