B69812N2457D201 EPCOS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- SMD filter consisting of coupled resonators with stepped impedances
- extreme low losses
- high attenuations at GSM (900, 1800) and UMTS bands
- high attenuation at 2 times center frequency
- (NdBa)TiO3 (εr = 88 / TCf =0±10 ppm/K) with a coating of copper (10µm) and tin (>5µm)
- Excellent reflow solderability, no migration effect due to copper/tin metallization Index Page 2 • Dimension Limits , Marking
- Recommended footprint Page 3 • Characteristics
- Maximum ratings
- Typical passband characteristic Page 4 • Processing information
- Soldering requirements
- Delivery mode
Microwave Ceramics and Modules Filter 2 – Pole Filter for W - LAN B69812N2457D201 Data Sheet ISSUE DATE 26.04.04 ISSUE A PUBLISHER SAW MWC PD PAGE 2/4 Dimension Limits , Marking Recommended footprint View from below onto the solder terminals and view from beside Solder Pads: I/O Pads must be connected to lines with 50 Ω impedance. In the application a termination of 50 Ω must be realized. Ground, covered with solder resist, connected to lower ground plane by vias with maximum diameter of 0.3mm and max. distance of 1mm I/O I/OG GG
Microwave Ceramics and Modules Filter 2 – Pole Filter for W - LAN B69812N2457D201 Data Sheet ISSUE DATE 26.04.04 ISSUE A PUBLISHER SAW MWC PD PAGE 3/4 Characteristics min. typ. max. Center frequency fc -2 . 4 5 0 -G H z Insertion loss α IL 0.7 1.0 dB Passband (2400- 2500) B 100 MHz Amplitude ripple (peak - peak) ∆α 0.4 0.8 dB Standing wave ratio SWR 1.5 2.0 Impedance Z 50 Ω Attenuation α at DC to 880 MHz at 880 to 960 MHz at 960 to 1990 MHz at 1990 to 2100 MHz at 2100 to 2170 MHz at 3000 to 3200 MHz at 3200 to 3500 MHz at 3500 to 4800 MHz at 4800 to 5000 MHz dB dB dB dB dB dB dB dB dB Maximum ratings IEC climatic category (IEC 68-1) - 40 /+ 90/56 Operating temperature Top - 40 / + 85 °C Typical passband characteristic -50 -45 -40 -35 -30 -25 -20 -15 -10 frequency [GHz] attenuation [dB] S21 [dB] S11 [dB]
Microwave Ceramics and Modules Filter 2 – Pole Filter for W - LAN B69812N2457D201 Data Sheet ISSUE DATE 26.04.04 ISSUE A PUBLISHER SAW MWC PD PAGE 4/4 Processing information z Wettability to IEC 68-2-58: ≥ 75% (after aging) Soldering Requirements Profile for eutectic SnPb solder paste Profile for leadfree solder paste Soldering type reflow reflow Maximum soldering temperature 235 (max. 2 sec.) 260 (max. 2 sec.) °C (measuring point on top surface of the component) 225 (max. 10 sec.) 250 (max. 10 sec.) °C Recommended soldering conditions (infrared): 20-40 sec. 40-80 sec. within 10 sec. Time [sec.] Temp. [°C] 215°C±10°C 30 sec. 2-3 min. within 10 sec. Time [sec.] Temp. [°C] 245°C±5°C Delivery mode
- Blister tape acc. to IEC 286-3, grey
- Pieces/tape: 4000 EPCOS AG 2001. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed.