B65659-F1-X1

B65808N1005D002 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Series/Type: RM 6 The following products presented in this data sheet are being withdrawn. For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Ordering Code Substitute ProductDate of Withdrawal Deadline Last Orders Last Shipments B65808N1005D002 B65808N1006D002 2003-08-08 2004-02-29 2004-08-31 B65659F0001X101 B65659F0001X023 2004-01-23 B65821C1008T002 B65821C1008T001 2003-08-08 2004-02-29 2004-08-31 B65807C0000R026 B65807C0000R048 2002-08-02 2002-12-31 2003-03-31 B65807J0000Y042 B65807J0000Y066 2002-08-02 2002-12-31 2003-03-31 B65808K1006D002 B65808N1006D002 2003-08-08 2004-02-29 2004-08-31

I In accordance with IEC 60431 I Core without center hole for transformer applications I RM cores are supplied in sets Magnetic characteristics (per set) Approx. weight (per set) Gapped with center hole without center hole Σl/A le Ae Amin Ve 0,86 26,9 31,3 840 0,78 28,6 36,6 1 050 mm mm mm2 mm2 mm3 m 4,9 5,3 g Material AL value nH s approx. mm µe Ordering code1) -J without center hole -N with threaded sleeve -C with center hole K1 40 ± 3 % 0,80 27,4 B65807-+40-A1 M33 63 ± 3 % 0,60 43,2 B65807-+63-A33 100 ± 3 % 0,38 68,5 B65807-+100-A33 N48 160 ± 3 % 0,22 110 B65807-+160-A48 250 ± 3 % 0,12 171 B65807-+250-A48 315 ± 3 % 0,08 216 B65807-+315-A48 400 ± 3 % 0,05 274 B65807-+400-A48 N41 250 ± 3 % 0,17 155 B65807-J250-A41 1) Replace the + by the code letter “C” or “N” for the required version. Standard version is “C”. B65807Core RM 6

µe AL1min nH PV W/set Ordering code -C with center hole -J w/o center hole N26 2200 + 30/– 20 % 1500 B65807-C-R26 N30 4300 + 30/– 20 % 2670 B65807-J-R30 T57 1) 3500 + 30/– 20 % 2180 B65807-J-R57 T38 8600 + 40/– 30 % 5340 B65807-J-Y38 T42 12300 + 40/– 30 % 7630 B65807-J-Y42 N49 1700 + 30/– 20 % 1060 960 < 0,15 (50 mT, 500 kHz, 100 °C) B65807-J-R49 N87 2400 + 30/– 20 % 1490 1450 < 0,51 (200 mT, 100 kHz, 100 °C) B65807-J-R87 N971) 2400 + 30/– 20 % 1490 1450 < 0,39 (200 mT, 100 kHz, 100 °C) B65807-J-R97 N41 3100 + 30/– 20 % 1920 1450 < 0,16 (200 mT, 25 kHz, 100 °C) B65807-J-R41 1) Preliminary data B65807Core RM 6

Coil former, squared pins Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Winding: see “Processing Notes ”, page 153 For matching clamp and insulating washers see page 210. Sections AN mm2 lN mm AR value µΩ Pins Ordering code 1 15 30 69 4 B65808-N1004-D1

5 B65808-N1005-D1

6 B65808-N1006-D1

6 B65808-W1006-D1

2 14 30 73 5 B65808-N1005-D2

6 B65808-N1006-D2

5±0,3 6,5+0,15 Erdungspunkte ø 1,3+0,1 0,48±0,06 2,54 ø 1+0,1 0,7±0,05 ø 1,25 0,1ø 7,45 _ 8,65 0,1_ 0,17,85 _ _ø 12,3 0,2 _0,3 0,1 ø 1+0,1 Ansicht in Montagerichtung Lochgruppen

4 Stifte 5 und 6 Stifte

Ground Ø 1,3+0,1 Pin 4 is omitted in 5-pin version Hole arrangement View in mounting direction 4 pins 5 + 6 pins B65808Accessories RM 6

Coil former, pins squared in the start-of-winding area Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 ° C), color code blue Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 ° C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 ° C, 3,5 s Winding: see “Processing Notes”, page 153 For matching clamp and insulating washers see page 210. 4 pins 5 pins 6 pins Sections AN mm2 lN mm AR value µΩ Pins Ordering code 1 15 30 69 4 B65808-K1004-D1

5 B65808-K1005-D1

6 B65808-K1006-D1

2 14 30 73 4 B65808-K1004-D2

6 B65808-K1006-D2

Ground Ø 1,3+0,1 Hole arrangement View in mounting direction 0,48±0,06 B65808Accessories RM 6

Coil former for SMPS transformers with line isolation The creepage distances and clearances are designed such that the coil former is suitable for use in SMPS transformers with line isolation. I Closed center flange with external wire guide I Pins squared in the start-of-winding area I Optimized for use with automatic winding machines Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code green Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Winding: see “Processing Notes ”, page 153 Sections AN mm2 lN mm AR value µΩ Pins Ordering code 2 14 30 73 8 B65808-X1108-D2 FRM0261-P max.0,45 5±0,3 6,5+0,15 Erdungspunkte ø 1,3+0,1 ø 1+0,1 0,47±0,05 2,54 0,7±0,05 A C D 0,7±0,05 Schnitt C-D Ansicht A 6,35 (nur Mittelflansch) 0,2ø 12,3 _ 0,1ø 4,75 _ 0,18,6 _ 7,8 0,1_ Hole arrangement View in mounting direction Ground Ø 1,3+0,1 View ASection C–D (only center flange) B65808Accessories RM 6

Coil former for power applications with angled pins Optimized for automatic winding Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Winding: see “Processing Notes ”, page 153 For matching clamp and insulating washer 1 see page 210 Sections AN mm2 lN mm AR value µΩ Pins Ordering code 1 15 30 69 8 B65808-E1508-T1 FRM0298-Y 11,2+0,3 8,5+0,2 0,5±0,1 0,95±0,1 0,30,5 Core3,81 5,08 12,7 17,78 15,24 Ground ø 1,3+0,15 ø 1+0,15 6,5+0,2 0,416 _7,95 0,1_ ø 7,55 0,2_ 2,2 0,2_ 0,34,4 _ 0,152,5 _ Marking of pin 1 Hole arrangement View in mounting direction B65808Accessories RM 6

Coil former for power applications with straight pins Optimized for automatic winding Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Winding: see “Processing Notes ”, page 153 For matching clamp and insulating washer 1 see page 210 Sections AN mm2 lN mm AR value µΩ Pins Ordering code 1 15 30 69 8 B65808-W1508-T1 FRM0299-7 0,95±0,1 15,24 3,81 Core 12,7 5,08 0,45 ø 1+0,15 Ground ø 1,3+0,1517,78 1,5 Marking of pin 18,4+0,25 0,15 11,2+0,2 18,4 max. 7,95 0,1_ 0,5±0,1 ø 7,4 _ 16 max. 6,5+0,2 0,22,2_ 0,2512,3 _ Hole arrangement View in mounting direction B65808Accessories RM 6

I With ground terminal, made of stainless spring steel (tinned), 0,435 mm thick I Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s I Also available as strip clamp on reels Insulating washer 1 between core and coil former I For tolerance compensation and for insulation I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,08 mm thick Insulating washer 2 for double-clad PCBs I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,3 mm thick Clamp Insulating washer 1 Insulating washer 2 Clamping forces for RM 6 Ordering code Clamp (ordering code per piece, 2 are required) B65808-A2203 Insulating washer 1 (reel packing, PU = 1 reel) B65808-A5000 Insulating washer 2 (bulk) B65808-C2005 FRM0187-C 9,5+0,2 2,6 max. +0,2 0,110,9 _ +0,1 0,24,5 _ 0,6 Fmin: Extension of clamp from a to a2 = Xmin Fmax: Extension of clamp from a to a1 = Xmax Clamp opening a (mm) 9,5 + 0,2 Core nose Zmax (mm) 0,22 Height of core pair X (mm)Xmin Xmax 10,1 10,6 Clamping force F (N) Fmin Fmax B65808Accessories RM 6

SMD coil former with gullwing terminals Material: GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s permissible soldering temperature for wire-wrap connection on coil former: 400°C,1 s Winding: see “Processing Notes ”, page 160 Clamp I Without ground terminal, made of stainless spring steel, 0,435 mm thick I Also available as strip clamp (each carton containing 2 reels) on request Coil former Clamp Sections AN mm2 lN mm AR value µΩ Terminals Ordering code 1 16,2 31 66 8 B65821-C1008-T1 2 15,2 31 69 8 B65821-C1008-T2 Clamp (ordering code per piece, 2 are required) B65808-J2204 FRM0238-Q ø 6,5+0,15 0,4±0,1 0,3 0,5±0,1

1 Kammer 2 Kammer

11,1+0,2 5,08 12,712,7 5,08 22,8 1,2 3,81 2,5 Empfehlung für das Leiterplattenlayout 0,6±0,11 3,81 0,2ø 12,3 _ 0,1ø 7,45 _ 0,17,95 _0,052,3 _ 0,050,85 _ 0,216,7 _ 0,322 _ 0,215,5 _ Recommended PCB layout 1 section 2 sections B65821 B65808 Accessories RM 6

SMD coil former with J terminals Material: GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s permissible soldering temperature for wire-wrap connection on coil former: 400°C,1 s Winding: see “Processing Notes ”, page 160 Clamp G Without ground terminal, made of stainless spring steel, 0,435 mm thick G Also available as strip clamp (each carton containing 2 reels) on request Coil former Clamp Sections AN mm2 lN mm AR value µΩ Terminals Ordering code 1 16,2 31 66 8 B65821-J1008-T1 Clamp (ordering code per piece, 2 are required) B65808-J2204 FRM0239-Y 2,1±0,1 0,3 0,3 0,5±0,05 0,85±0,05 8,4+0,2 11,1+0,2 4 5 0,63,81 5,08 3,81 0,6±0,051,7±0,05 6,5+0,1 5,08 Leiterplattenlayout Empfehlung für das 1,2 12,7 3,81 2,5 0,1ø 7,45 _ 0,12,3 _ 0,17,95 _ 0,221,4 _ 0,216,7 _ 0,212,3 _ 15,5 0,2_ Recommended PCB layout B65821 B65808 Accessories RM 6

I Tube core with thread and core brake made of GFR polyterephthalate Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Adjusting screws ab c Core RM 6 Adjusting screw Min. adjusting range Ordering code Fig. Tube core Mate- rial AL value nH ∅ × length mm Mate- rial Color code K 1 40 a 2,62 × 3,7 Si 1 white 15 B65659-F1-X101 M 33 63 a 2,62 × 3,7 Si 1 white 17 B65659-F1-X101 100 c 2,82 × 4,4 Si 1 brown 16 B65659-F4-X101 N 48 160 a 2,62 × 3,7 K 1 green 17 B65659-F1-X1 250 a 2,62 × 3,7 N 22 red 11 B65659-F1-X23 315 b 2,75 × 4,4 N 22 black 13 B65659-F3-X23 400 c 2,82 × 4,4 N 22 yellow 11 B65659-F4-X23 Adjusting screwdriver B63399-B4 Handle B63399-B5 B65659 B63399Accessories RM 6

Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND  EPCOS AG 2000. Alle Rechte vorbehalten. Vervielf ältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Brosch üre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Lieferm öglichkeiten richten Sie bitte an den Ihnen n ächstgele- genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k önnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Ausk ünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge- sellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro- chure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be con- sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.