B65651-100-A33

B65651 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 18 x 11 The following products presented in this data sheet are being withdrawn. For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Ordering Code Substitute ProductDate of Withdrawal Deadline Last Orders Last Shipments B65651D0000R026 B65651D0000R048 2002-08-02 2002-12-31 2003-03-31 B65652A50000000 2004-10-18 2005-03-31 2005-09-30 B65659F0001X101 B65659F0001X023 2004-01-23

I In accordance with IEC 60133 I Pot cores are supplied in sets Magnetic characteristics (per set) Approx. weight (per set) Gapped Ungapped with center hole without center hole Σl/A le Ae Amin Ve 0,6 25,9 1 120 0,57 26,6 46,7 33,9 1 240 mm mm mm2 mm2 mm3 m 6,0 6,6 g Material AL value nH s approx. mm µe Ordering code 1) -D with center hole -T w. threaded sleeve K1 40 ± 3 % 1,60 19 B65651-+40-A1 M33 100 ± 3 % 0,60 48 B65651-+100-A33 N48 160 ± 2 % 0,32 77 B65651-+160-G48 250 ± 3 % 0,20 120 B65651-+250-A48 315 ± 3 % 0,15 151 B65651-+315-A48 400 ± 3 % 0,10 192 B65651-+400-A48 500 ± 3 % 0,07 240 B65651-+500-A48 630 ± 5 % 0,05 302 B65651-D630-J48 Material AL value nH µe AL1min nH PV W/set Ordering code -D with center hole -W w/o center hole N26 2900 + 30/– 20 % 1380 B65651-D-R26 N30 5900 + 30/– 20 % 2680 B65651-W-R30 T38 12600 + 40/– 30 % 5710 B65651-W-Y38 N87 3600 + 30/– 20 % 1630 2000 < 0,46 (200 mT, 100 kHz, 100 °C) B65651-W-R87 1) Replace the + by the code letter ”D“ or ”T“ for the required version. B65651Core P 18 × 11

Standard: to IEC 60133 and DIN 41 294 Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Winding: see “Processing Notes ”, page 155 Insulating washer 1 between core and coil former I For tolerance compensation and for insulation I Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,04 mm thick Insulating washer 2 between core and terminal carrier I For increased dielectric strength I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,08 mm thick Coil former Insulating washer 1 Insulating washer 2 Coil former Bestellnummer Sections AN mm2 lN mm AR value µΩ 1 16 35,6 87 B65652-B-T1 2 13 35,6 94 B65652-B-T2 Insulating washer 1 (reel packing, PU = 1 reel) B65652-A5000 Insulating washer 2 (bulk) B65652-A5002 FPK0274-7 14,8 2+0,6 0,5 AN ø 8,7 ø 7,7+0,1 0,4 ø 7,7+0,1 ø 8,7 0,5 _0,2 _0,1 0,1_ 0,1_ 0,1_ B65652Accessories P 18 × 11

Mounting assembly for printed circuit boards I The set comprises a terminal carrier and a yoke I For snap-in connection Terminal carrier Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code gray Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Yoke Spring yoke, made of tinned nickel silver (0,3 mm), with ground terminal 4 solder terminals 8 solder terminals Complete mounting assembly (4 solder terminals) Ordering code: B65655-B9 Complete mounting assembly (8 solder terminals) Ordering code: B65655-B10 *) This recess must be on the side of the grounding pin to ensure that the yoke locks in position. a) Yoke b) Terminal carrier with 4 solder terminals c) Terminal carrier with 8 solder terminals FPK0295-U 19,9 max. 20 max. Erdungspunkt 13,5 max.3,5 a b 20,7 max. ø 1,3+0,1 2,54 8 1 Erdungspunkt Hole arrangement View in mounting direction Ground Ground FPK0296-3 19,9 max. 20 max. Erdungspunkt 13,5 max.3,5 a c 20,7 max. ø 1,3+0,1 2,54 8 1 Erdungspunkt Hole arrangement View in mounting direction Ground Ground B65655Accessories P 18 × 11

I Tube core with thread and core brake made of GFR polyterephthalate Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Adjusting screw a b c Core P 18 × 11 Adjusting screw Min. adjusting range Ordering code Tube core Material AL value nH Fig. ∅ × length mm Material Color code K 1 40 a 2,62 × 3,6 Si 1 white 13 B65659-F1-X101 M 33 100 a 2,62 × 3,6 Si 1 white 10 B65659-F1-X101 N 48 160 a 2,62 × 3,6 Si 1 white 7 B65659-F1-X101 250 a 2,62 × 3,6 K 1 green 10 B65659-F1-X1 315 400 b 2,75 × 4,4 N 22 black 16 B65659-F3-X23 400 500 c 2,82 × 4,4 N 22 yellow 16 B65659-F4-X23 Adjusting screwdriver B63399-B4 Handle B63399-B5 B63399 B65659Accessories P 18 × 11

Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND  EPCOS AG 2000. Alle Rechte vorbehalten. Vervielf ältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Brosch üre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Lieferm öglichkeiten richten Sie bitte an den Ihnen n ächstgele- genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k önnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Ausk ünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge- sellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro- chure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be con- sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.