B65517-D200-A48

B65517 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

PM/P/P Cores Halves/EP/TT/PR Cores Series/Type: P 9 x 5 The following products presented in this data sheet are being withdrawn. For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Ordering Code Substitute ProductDate of Withdrawal Deadline Last Orders Last Shipments B65522A50000000 2004-10-18 2005-03-31 2005-09-30 B65517D0000R026 B65517D0000R048 2002-08-02 2002-12-31 2003-03-31 B65518C3000X001 B65518C3000X101 2003-08-08 2004-02-29 2004-08-31 B65518C3000X101 B65518C3000X001 2004-01-23

I In accordance with IEC 60133 I Pot cores are supplied in sets Magnetic characteristics (per set) Approx. weight (per set) Gapped Ungapped with center hole without center hole Σl/A le Ae Amin Ve 1,25 12,2 9,8 120 1,13 13,4 11,9 9,3 159 mm mm mm2 mm2 mm3 m 0,8 1,0 g Material AL value nH s approx. mm µe Ordering code 1) -D with center hole -T with threaded sleeve K1 25 ± 3 % 0,45 25 B65517-+25-A1 40 ± 3 % 0,26 40 B65517-+40-A1 M33 63 ± 3 % 0,20 63 B65517-D63-A33 N48 100 ± 3 % 0,10 100 B65517-+100-A48 160 ± 3 % 0,06 159 B65517-+160-A48 200 ± 3 % 0,04 200 B65517-D200-A48 250 ± 5 % 0,03 249 B65517-D250-J48 Material AL value nH µe Ordering code -D with center hole -W without center hole N26 1300 + 30/– 20 % 1190 B65517-D-R26 N30 2500 + 30/– 20 % 2490 B65517-D-R30 T38 5500 + 40/– 30 % 4945 B65517-W-Y38 1) Replace the + by the code letter ”D“ or ”T“ for the required version. B65517Core P 9 × 5

Standard: to IEC 60133 Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Winding: see “Processing Notes ”, page 155 Insulating washer 1 between core and coil former I For tolerance compensation and for insulation I Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E 120°C), 0,04 mm thick Coil former Insulating washer 1 Coil former Ordering code Sections AN mm2 lN mm AR value µΩ 1 3,6 19,2 183 B65522-B-T1 2 3,2 19,2 206 B65522-B-T2 Insulating washer 1 (reel packing, PU = 1 reel) B65522-A5000 FPK0339-Q AN 1,5+0,3 0,35 0,1_3,5 ø 4+0,1 ø 4,8 0,1_ ø 7,4 _0,15 0,3 FPK0054-F ø 7,6±0,2 1,9 0,8±0,15 ø 3,7±0,2 B65522Accessories P 9 × 5

SMD coil former with gullwing terminals Material: GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s permissible soldering temperature for wire-wrap connection on coil former: 400°C, 1 s Winding: see “Processing Notes ”, page 155 Sections AN mm2 lN mm AR value µΩ Terminals Ordering code 1 3,4 19,2 194 4 B65524-C1004-T1 3,4 19,2 194 8 B65524-C1008-T1 In the 4-terminal version terminals 2, 3, 6 and 7 are omitted. FPK0234-D ø 10,35±0,15 0,35±0,05 0,5±0,05 9,35+0,15 6+0,2 2,54 4 x 2,54 = 10,16 17,8 1,2 10,16 2,54 Empfehlung für das Leiterplattenlayout 0,75±0,1 0,65±0,05 2,5 3,95+0,15 0,3±0,2 0,15ø 4,8 _ 0,153,5 _ 0,14,7 _ 0,2ø 7,45 _ 0,312,2 _ 0,21,6 _ 0,210,7 _ +0,1 0,216,6 _ Recommended PCB layout B65524 Accessories P 9 × 5

Mounting assembly for printed circuit boards I The set comprises a terminal carrier and a yoke I For snap-in connection Terminal carrier I With thread for the adjusting screw (to be combined with core version ”D“) Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 °C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s Yoke Spring yoke, made of tinned nickel silver (0,25 mm), with ground terminal 4 solder terminals 6 solder terminals Complete mounting assembly (4 solder terminals) Ordering code: B65518-D2001 Complete mounting assembly (6 solder terminals) Ordering code: B65518-D2002 1) 1,3 hole also permissible a) Yoke b) Terminal carrier with 4 solder terminals c) Terminal carrier with 6 solder terminals FPK0056-W 2,54 1,25 Erdungspunkt 123 45 6 3 1 12,3 max. 9,9 max. 8,3 max. 3,5 0,4_ M1,4 Gewinde- führung für Abgleich- schraube ø 0,5 c a 1+0,11) FPK0057-S 9,9 max. Abgleich- schraube Gewinde- führung für M1,4 9,9 max.8,3 max. 0,43,5 _ ø 0,5 1+0,1 Erdungspunkt 2,54 4 3 a b M1,4 adjusting screw Thread for Ground M1,4 adjusting screw Thread for Hole arrangement View in mounting direction Hole arrangement View in mounting direction Ground B65518Accessories P 9 × 5

I Tube core with thread and core brake made of GFR polyterephthalate Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Adjusting screw Core P 9 × 5 Adjusting screw Min. adjusting range Ordering code Tube core Material AL value nH ∅ × length mm Mate- rial Color code K 1 25 1,81 × 2,0 Si 1 brown 17 B65518-C3000-X101 40 1,81 × 2,0 K 1 blue 16 B65518-C3000-X1 M 33 40 1,81 × 2,0 Si 1 brown 16 B65518-C3000-X101 N 48 100 1,81 × 2,0 K 1 blue 15 B65518-C3000-X1 Adjusting screwdriver B63399-B4 Handle B63399-B5 B63399 B65518Accessories P 9 × 5

Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND  EPCOS AG 2000. Alle Rechte vorbehalten. Vervielf ältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Brosch üre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Lieferm öglichkeiten richten Sie bitte an den Ihnen n ächstgele- genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k önnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Ausk ünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge- sellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro- chure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be con- sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.