B5VS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: B5VS B5VS SPECIFICATIONS ES-1513 Rev.9 Page 1/3 https://www.m-system.co.jp/ Super-mini Two-wire Terminal Block Signal Conditioners B5-UNIT SIGNAL TRANSMITTER Functions & Features

  • Converts a DC input into an isolated 4 – 20 mA DC signal
  • Monitor terminals
  • High-density mounting
  • Power LED 25 (.98) (3.82) 41 (1.61) mm (inch) MODEL: B5VS–[1][2]

ORDERING INFORMATION

  • Code number: B5VS-[1][2] Specify a code from below for each of [1] and [2]. (e.g. B5VS-4W/K/Q)
  • Special input range (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 249 Ω) B: 2 – 10 mA DC (Input resistance 499 Ω) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Input resistance 49.9 Ω) E: 0 – 16 mA DC (Input resistance 61.9 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 10 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 25 msec.) Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Terminal block Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output Zero adjustment: -1 to +1 % (front) Span adjustment: 95 to 105 % (front) Power LED: Orange LED turns on when the power is supplied. INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value for code Z. (R ≤ 0.125 W ÷ [F.S. Current]2) ■ DC Voltage: -30 – +30 V DC Minimum span: 100 mV Offset: Max. 1.5 times span
  • Input resistance Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ OUTPUT SPECIFICATIONS Output: 4 – 20 mA DC Load resistance vs. supply voltage: Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A) (including leadwire resistance) 10 12 15 20 25 28 200 400 600 800 LOAD RESISTANCE [Ω ] SUPPLY VOLTAGE [V ] (600Ω maximum at 24V DC)

MODEL: B5VS B5VS SPECIFICATIONS ES-1513 Rev.9 Page 2/3 https://www.m-system.co.jp/ INSTALLATION Supply voltage: 12 – 28 V DC Operating temperature: -40 to +80°C (-40 to +176°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EXTERNAL VIEW 7 8 5 6 3 4 1 2 Span Adj. Zero Adj. Power LED

MODEL: B5VS B5VS SPECIFICATIONS ES-1513 Rev.9 Page 3/3 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch] 7 8 5 6 3 4 1 2 94 (3.70)

  • When mounting, no extra space is needed between units. DIN RAIL 35mm wide 8–M3.5 SCREW7.3 (.29) 3 (.12) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation SZ Low Drift Amplifier Output Driver 8 7 + mA MONITOR INPUT LOAD OUTPUT 24V DC 4 – 20mA DC * Input shunt resistor incorporated for current input. ** Short across the terminals for current input. POWER LED Specifications are subject to change without notice.