B5TS

B5TS MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

MODEL: B5TS B5TS SPECIFICATIONS ES-1512 Rev.7 Page 1/4 https://www.m-system.co.jp/ Super-mini Two-wire Terminal Block Signal Conditioners B5-UNIT THERMOCOUPLE TRANSMITTER Functions & Features

• Accepts direct input from a thermocouple and provides an isolated 4 – 20 mA DC signal
• Linearization and burnout
• Cold junction compensation
• Monitor terminals
• High-density mounting
• Power LED 25 (.98) (3.82) 41 (1.61) mm (inch) MODEL: B5TS–[1][2]

ORDERING INFORMATION

• Code number: B5TS-[1][2] Specify a code from below for each of [1] and [2]. (e.g. B5TS-1/K/BL/Q)
• Temperature range (e.g. 0 – 800°C)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT THERMOCOUPLE 1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) 2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) 4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) 5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) 7: R (Usable range -50 to +1760°C, -58 to +3200°F) 8: S (Usable range -50 to +1760°C, -58 to +3200°F) N: N (Usable range -270 to +1300°C, -454 to +2372°F) 0: Specify [2] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 25 msec.) Burnout blank: Upscale burnout /BL: Downscale burnout /BN: No burnout Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Terminal block Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output Zero adjustment: -1 to +1 % (front) Span adjustment: 98 to 102 % (front) Burnout: Upscale standard; downscale or no burnout optional Linearization: Standard Cold junction compensation: CJC sensor attached to the input terminals (B thermocouple is without CJC as standard) Power LED: Orange LED turns on when the power is supplied. INPUT SPECIFICATIONS Minimum span: 3 mV Input resistance: 20 kΩ min. Burnout sensing: 0.1 μA Lower temperature range & span (in °C) (PR): Lower range 0 to 880°C; min. span 370°C K (CA): Lower range -270 to +1200°C; min. span 75°C E (CRC): Lower range -270 to +750°C; min. span 50°C J (IC): Lower range -210 to +800°C; min. span 60°C T (CC): Lower range -270 to +325°C; min. span 75°C B (RH): Lower range 0 to 750°C; min. span 780°C R: Lower range -50 to +550°C; min. span 360°C S: Lower range -50 to +550°C; min. span 380°C N: Lower range -270 to +1100°C; min. span 110°C Lower temperature range & span (in °F) (PR): Lower range 32 to 1616°F; min. span 670°F K (CA): Lower range -454 to +2192°F; min. span 140°F E (CRC): Lower range -454 to +1382°F; min. span 90°F J (IC): Lower range -346 to +1472°F; min. span 110°F

MODEL: B5TS B5TS SPECIFICATIONS ES-1512 Rev.7 Page 2/4 https://www.m-system.co.jp/ T (CC): Lower range -454 to +617°F; min. span 140°F B (RH): Lower range 32 to 1382°F; min. span 1450°F R: Lower range -58 to +1022°F; min. span 680°F S: Lower range -58 to +1022°F; min. span 700°F N: Lower range -454 to +2012°F; min. span 200°F Note: The described accuracy may be partially not satisfied when the temperature ranges below 0°C. Consult M-System. OUTPUT SPECIFICATIONS Output: 4 – 20 mA DC Load resistance vs. supply voltage: Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A) (including leadwire resistance) 10 12 15 20 25 28 200 400 600 800 LOAD RESISTANCE [Ω ] SUPPLY VOLTAGE [V ] (600Ω maximum at 24V DC) INSTALLATION Supply voltage: 12 – 28 V DC Operating temperature: -40 to +80°C (-40 to +176°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy (whichever is greater) K, E, J: ±0.1 % of FS or ±0.2°C (±0.36°F) T, N: ±0.2 % of FS or ±0.2°C (±0.36°F) PR, R, S: ±0.3 % of FS (over 400°C or 750°F) B: ±0.3 % of FS (over 770°C or 1420°F) Cold junction compensation error K: ±1°C max. at 0 – 80°C (±1.8°F max. at 32 – 176°F J: ±2°C max. at 0 – 80°C (±3.6°F max. at 32 – 176°F E, T, N: ±3°C max. at 0 – 80°C (±5.4°F max. at 32 – 176°F PR, R, S: ±4°C max. at 0 – 80°C (±7.2°F max. at 32 – 176°F Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Burnout response: ≤ 10 sec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive

MODEL: B5TS B5TS SPECIFICATIONS ES-1512 Rev.7 Page 3/4 https://www.m-system.co.jp/ EXTERNAL VIEW 7 8 5 6 3 4 1 2 Span Adj. Zero Adj. Power LED EXTERNAL DIMENSIONS unit: mm [inch] 7 8 5 6 3 4 1 2 94 (3.70)

• When mounting, no extra space is needed between units. DIN RAIL 35mm wide 8–M3.5 SCREW7.3 (.29) 3 (.12) TERMINAL ASSIGNMENTS unit: mm [inch] 7 8 5 6 3 4 1 2 CJC SENSOR (model: CJM) 16 (.63)

MODEL: B5TS B5TS SPECIFICATIONS ES-1512 Rev.7 Page 4/4 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM *Deleted with B thermocouple Isolation Low Drift Amplifier Burnout Output Driver SZ T/C comp. leadwire Linearizer Amplifier Cold Junction Compensation CJC SENSOR metal leg model: CJM 7 + MONITOR OUTPUT 24V DC 4 – 20mA DC mA LOAD POWER LED Specifications are subject to change without notice.