B5026

B5026 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

 EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW IF Filter W-CDMA base station, Rx Series/Type: Ordering code: B5026 B39191-B5026-H510 Date: Version: Jun 06, 2006 2.1

2 Jun 06, 2006

190.00 MHz

Please readcautions and warnings and important notes at the end of this document. SAW Components Low-Loss Filter Data Sheet Application ■ Low-loss IF filter for W-CDMA base station, receive path (Rx) ■ Unbalanced or balanced operation possible ■ High near-by selectivity ■ Temperature stable

Features

■ Package size 13.3 x 6.5 x 1.6 mm3 ■ Package code DCC12A ■ RoHS compatible ■ Approx. weight 0.4 g ■ Ceramic package forSurfaceM ountTech- nology (SMT ) ■ Ni, gold-plated terminals ■ ElectrostaticSensitiveD evice (ESD ) ■ Filter surface passivated top view side view bottom view 1,66,5 13,3 1,7 1,0 7,62 12 3 4 5 678910 3,81 2,3 Pin configuration ■ 10 Input ■ 1 Input ground ■ 5 Output ■ 6 Output ground ■ 3,8 To be grounded ■ 2,4,7,9 Case ground

3 Jun 06, 2006

Please readcautions and warnings and important notes at the end of this document. Characteristics Operating temperature range: T = -30 to +85 ˚C Terminating source impedance: Z S =5 0 Ω and matching network Terminating load impedance: Z L =5 0 Ω and matching network min. typ. @ 25˚C max. Nominal frequency fN — 190.0 — MHz Minimum insertion attenuation α min — 12.0 15.0 dB (including matching network) Passband width α rel≤ 1 dB B 1dB 3.84 4.2 — MHz α rel≤ 30 dB B30dB — 4.8 — MHz Amplitude ripple (p-p) f N ± 1.92 MHz Δα — 0.7 1.0 dB Phase ripple(rms) f N ± 1.92 MHz Δϕ — 1.0 1.5 ˚ rms Absolute group delay τ mean value within fN ± 1.92 MHz at 25 ˚C1) 1) At other temperatures the variation from filter to filter is also restricted to +/- 5 ns. From -30 ... +85 ˚C the variation of mean value of group delay is restricted to +/- 10 ns. 1688 1693 1698 ns Error vector magnitude fN ± 1.92 MHz EVM — 2.0 — % Adjacent channel suppression ACS Relative attenuation(relative toα min) α rel fN ± 3.5 MHz...fN ± 20 MHz 40 45 — dB Temperature coefficient of frequency2) 2) Temperature dependance of fc:f c(TA) = fc(T0) (1 + TC f(TA – T0)2) TC f — –0.036 — ppm/K 2 Turnover temperature T0 — 20 — ˚C Maximum ratings Operable temperature rangeT –40/+85 ˚C Storage temperature rangeTstg –40/+85 ˚C DC voltage VDC 3 V Input Power(passband) PIN 10 dBm Input Power(stopband) PIN 20 dBm fN ±5 MHz...fN ± 70 MHz

4 Jun 06, 2006

Please readcautions and warnings and important notes at the end of this document. SAW Components Low-Loss Filter Data Sheet Matching network to 50Ω Element values depend upon board layout. Alternative matching network to 50Ω Element values depend upon board layout. Lp1 = 39 nH Ls2 = 82 nH Lp3 = 56 nH Lp4 = 100 nH Ls5 = 82 nH Lp6 = 33 nH Lp3 Lp4 Lp6 Ls5Ls2 Lp1 C p1 = 68 pF Ls2 = 39 nH C p3 = 2.2 pF C p4 = 1.8 pF Ls5 = 56 nH C p6 = 56 pF

5 Jun 06, 2006

Please readcautions and warnings and important notes at the end of this document. Transfer function Transfer function(passband)

6 Jun 06, 2006

Please readcautions and warnings and important notes at the end of this document. SAW Components Low-Loss Filter Data Sheet For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the informa- tion contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Type B5026 Ordering code B39191-B5026-H510 Marking and Package C61157-A7-A94 Packaging F61074-V8163-Z000 Date Codes L_1126 S-Parameters Soldering profile S_6001

7 Jun 06, 2006

The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point outthat such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic compo- nents or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer appli- cations in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic compo- nent. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements,some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We alsoreserve the right to discontinue production and delivery of products. Conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. 6. Unless otherwise agreed in individual contracts,all orders are subject to the current ver- sion of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP , PhaseCap, PhaseMod, SIFI, SIKOREL, Silver- Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap aretrademarks registered or pendingin Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.