B43501A3157M007

B43501A1227M000 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 21

Technical content

Aluminum electrolytic capacitors Snap-in capacitors Series/Type: B43501 Date: November 2008 © EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Long-life grade capacitors

Applications

Uninterruptiple power supplies Switch-mode power supplies in industrial and entertainment electronics

Features

Voltage derating (0.93 VR for VR ≤ 450 V) enables 105 °C operation, more details available upon request Long useful life High reliability High ripple current capability Low ESR High CV product, compact Different case sizes available for each capacitance value RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with PET insulation available Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the base Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm Snap-in capacitors B43501 Long useful life 85 °C Page 2 of 21Please read Cautions and warnings and Important notes at the end of this document.

Specifications and characteristics in brief Rated voltage VR 160 ... 500 V DC Surge voltage VS 1.15 VR (for VR ≤ 250 V DC)

1.10 VR (for VR ≥ 385 V DC)

Rated capacitance CR 47 ... 2200 µF Capacitance tolerance ±20% M Leakage current Ileak (5 min, 20 °C) Self-inductance ESL Approx. 20 nH Useful life, VR ≤ 450 V Requirements: 85 °C; VR; IAC,R > 10000 h ΔC/C ≤ ±30% of initial value 40 °C; VR; 1.15 IAC,R > 250000 h ESR ≤ 3 times initial specified limit VR = 500 V Ileak ≤ initial specified limit 85 °C; VR; IAC,R > 5000 h 40 °C; VR; 1.15 IAC,R > 150000 h Voltage endurance test Post test requirements: 85 °C; VR ≤ 450 V 85 °C; VR = 500 V 5000 h 2500 h ΔC/C ≤ ±10% of initial value ESR ≤ 1.3 times initial specified limit Ileak ≤ initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Characteristics at low temperature Max. impedance ratio VR ≤ 400 V 420 ... 450 V 500 V at 100 Hz Z -25 °C / Z 20 °C 3 7 7 Z -40 °C / Z 20 °C 7 12 20 IEC climatic category To IEC 60068-1: VR ≤ 400 V DC: 40/085/56 ( 40 °C/+85 °C/56 days damp heat test) VR ≥ 420 V DC: 25/085/56 ( 25 °C/+85 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +85 °C but the impedance at 40 °C should be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-811 IEC 60384-4 B43501 Long useful life 85 °C Page 3 of 21Please read Cautions and warnings and Important notes at the end of this document.

Snap-in capacitors with standard insulation (PVC or PET) Snap-in terminals, length 6.3 ±1 mm. Also available in a shorter version with a length of 4.5 1 mm. PET insulation is marked with label "PET" on the sleeve. Snap-in capacitors are also available with 3 terminals (length 4.5 1 mm). PET insulation is marked with label "PET" on the sleeve. Dimensions (mm) Approx. weight (g) Packing units (pcs.)d +1 l ±2 22 25 9 160 22 30 12 160 22 35 15 160 22 40 18 160 25 25 13 130 25 30 17 130 25 35 19 130 25 40 22 130 25 45 25 130 25 50 29 130 25 55 32 130 Dimensions (mm) Approx. weight (g) Packing units (pcs.)d +1 l ±2 30 25 17 80 30 30 23 80 30 35 29 80 30 40 36 80 30 45 41 80 30 50 46 80 30 55 53 80 35 30 29 60 35 35 36 60 35 40 41 60 35 45 56 60 35 50 70 60 35 55 81 60 B43501 Long useful life 85 °C Page 4 of 21Please read Cautions and warnings and Important notes at the end of this document.

Snap-in capacitors with PVC insulation and PET insulation cap on terminal side Snap-in terminals, length 6.3 +1/ 1.4 mm. Also available in a shorter version with a length of 4.5 1.4 mm. PET insulation cap is positioned under the insulation sleeve. Snap-in capacitors are also available with 3 terminals (length 4.5 1.4 mm). PET insulation cap is positioned under the insulation sleeve. Dimensions (mm) Approx. weight (g) Packing units (pcs.)d +1.4 l +2.2/ 2 22 25 9 160 22 30 12 160 22 35 15 160 22 40 18 160 25 25 13 130 25 30 17 130 25 35 19 130 25 40 22 130 25 45 25 130 25 50 29 130 25 55 32 130 Dimensions (mm) Approx. weight (g) Packing units (pcs.)d +1.4 l +2.2/ 2 30 25 17 80 30 30 23 80 30 35 29 80 30 40 36 80 30 45 41 80 30 50 46 80 30 55 53 80 35 30 29 60 35 35 36 60 35 40 41 60 35 45 56 60 35 50 70 60 35 55 81 60 B43501 Long useful life 85 °C Page 5 of 21Please read Cautions and warnings and Important notes at the end of this document.

Packing of snap-in capacitors For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in part) in the correct position for insertion. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code Snap-in capacitors Terminal version Insulation version PVC PET PVC plus PET cap Standard terminals 6.3 mm M000 M060 M080 Short terminals 4.5 mm M007 M067 M087 3 terminals 4.5 mm M002 M062 M082 Ordering examples: B43501A9107M007 } snap-in capacitor with short terminals and standard PVC insulation B43501A9107M062 } snap-in capacitor with 3 terminals and PET insulation B43501A9107M080 } snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side B43501 Long useful life 85 °C Page 6 of 21Please read Cautions and warnings and Important notes at the end of this document.

Overview of available types VR (V DC) 160 200 250 385 400 420 450 500 Case dimensions d × l (mm) CR (µF) 47 22 × 25 22 × 25 68 22 × 25 22 × 25 22 × 30 25 × 25 22 × 30 25 × 25 100 22 × 30 25 × 25 22 × 30 25 × 25 22 × 30 25 × 25 22 × 35 25 × 30 30 × 25 25 × 35 30 × 25 120 22 × 35 25 × 30 150 22 × 25 22 × 40 25 × 30 22 × 40 30 × 25 22 × 40 25 × 35 25 × 35 30 × 30 25 × 45 30 × 30 180 30 × 30 25 × 35 30 × 30 30 × 35 25 × 50 30 × 35 220 22 × 25 22 × 25 22 × 30 25 × 25 25 × 40 30 × 30 25 × 40 30 × 30 25 × 40 30 × 35 25 × 50 30 × 35 30 × 40 35 × 35 270 25 × 45 30 × 35 35 × 30 25 × 55 30 × 35 35 × 30 25 × 55 30 × 40 35 × 35 30 × 50 35 × 35 330 22 × 30 22 × 30 25 × 25 22 × 35 25 × 30 25 × 50 30 × 40 25 × 55 30 × 45 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 390 30 × 45 35 × 35 30 × 50 30 × 55 35 × 45 35 × 50 470 22 × 35 22 × 35 25 × 30 30 × 25 25 × 35 30 × 30 30 × 50 35 × 40 30 × 50 35 × 45 30 × 55 35 × 45 35 × 50 35 × 55 560 30 × 55 35 × 45 35 × 45 35 × 50 35 × 55 680 25 × 35 25 × 35 30 × 30 25 × 45 30 × 35 35 × 30 35 × 50 35 × 55 B43501 Long useful life 85 °C Page 7 of 21Please read Cautions and warnings and Important notes at the end of this document.

VR (V DC) 160 200 250 385 400 420 450 500 Case dimensions d × l (mm) CR (µF) 1000 30 × 35 25 × 50 30 × 35 35 × 30 30 × 45 35 × 35 1200 25 × 55 30 × 40 30 × 55 35 × 40 1500 30 × 45 30 × 50 35 × 40 35 × 45 1800 30 × 55 35 × 45 35 × 55 2200 35 × 50 35 × 50 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. B43501 Long useful life 85 °C Page 8 of 21Please read Cautions and warnings and Important notes at the end of this document.

1) 120-Hz conversion factor of ripple current: I AC (120 Hz) = 1.03 IAC (100 Hz) Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d × l mm ESRtyp 100 Hz 20 °C mΩ ESRmax 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R1) 100 Hz 85 °C A Ordering code (composition see below) Composition of ordering code * = Insulation feature # = Terminal style 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) VR = 160 V DC 220 22 × 25 530 910 730 2.15 1.10 B43501A1227M0*# 330 22 × 30 350 610 490 2.80 1.43 B43501A1337M0*# 470 22 × 35 250 430 340 3.54 1.81 B43501A1477M0*# 680 25 × 35 170 300 240 4.70 2.40 B43501A1687M0*# 1000 30 × 35 120 200 160 6.11 3.12 B43501A1108M0*# 1500 30 × 45 75 140 110 8.23 4.20 B43501A1158M0*# 2200 35 × 50 55 90 75 11.3 5.81 B43501A1228M0*# VR = 200 V DC 220 22 × 25 450 730 580 2.15 1.10 B43501E2227M0*# 330 22 × 30 300 490 390 2.80 1.43 B43501E2337M0*# 330 25 × 25 300 490 390 2.94 1.50 B43501F2337M0*# 470 22 × 35 210 340 280 3.54 1.81 B43501E2477M0*# 470 25 × 30 210 340 280 3.62 1.85 B43501F2477M0*# 470 30 × 25 210 340 280 3.74 1.91 B43501G2477M0*# 680 25 × 35 150 240 190 4.62 2.36 B43501F2687M0*# 680 30 × 30 150 240 190 4.78 2.44 B43501G2687M0*# 1000 25 × 50 100 160 130 6.03 3.08 B43501E2108M0*# 1000 30 × 35 100 160 130 5.74 2.93 B43501F2108M0*# 1000 35 × 30 100 160 130 6.03 3.08 B43501G2108M0*# 1200 25 × 55 85 140 110 6.87 3.51 B43501E2128M0*# 1200 30 × 40 85 140 110 6.60 3.37 B43501F2128M0*# 1500 30 × 50 65 110 90 8.01 4.09 B43501E2158M0*# 1500 35 × 40 65 110 90 8.15 4.16 B43501F2158M0*# 1800 30 × 55 55 90 75 9.11 4.65 B43501E2188M0*# 1800 35 × 45 55 90 75 9.31 4.75 B43501F2188M0*# 2200 35 × 50 45 75 60 10.7 5.46 B43501E2228M0*# B43501 Long useful life 85 °C Page 9 of 21Please read Cautions and warnings and Important notes at the end of this document.

2) 120-Hz conversion factor of ripple current: I AC (120 Hz) = 1.03 IAC (100 Hz) Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d × l mm ESRtyp 100 Hz 20 °C mΩ ESRmax 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R2) 100 Hz 85 °C A Ordering code (composition see below) Composition of ordering code * = Insulation feature # = Terminal style 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) VR = 250 V DC 150 22 × 25 660 1070 860 1.78 0.91 B43501C2157M0*# 220 22 × 30 450 730 580 2.35 1.20 B43501C2227M0*# 220 25 × 25 450 730 580 2.35 1.20 B43501D2227M0*# 330 22 × 35 300 490 390 2.95 1.51 B43501C2337M0*# 330 25 × 30 300 490 390 3.13 1.60 B43501D2337M0*# 470 25 × 35 210 340 280 3.84 1.96 B43501C2477M0*# 470 30 × 30 210 340 280 3.92 2.00 B43501D2477M0*# 680 25 × 45 150 240 190 5.07 2.59 B43501C2687M0*# 680 30 × 35 150 240 190 5.03 2.57 B43501D2687M0*# 680 35 × 30 150 240 190 4.97 2.54 B43501E2687M0*# 1000 30 × 45 100 160 130 6.29 3.21 B43501C2108M0*# 1000 35 × 35 100 160 130 6.35 3.24 B43501D2108M0*# 1200 30 × 55 85 140 110 7.44 3.80 B43501A2128M0*# 1200 35 × 40 85 140 110 7.29 3.72 B43501B2128M0*# 1500 35 × 45 65 110 90 8.50 4.34 B43501B2158M0*# 1800 35 × 55 55 90 75 10.0 5.12 B43501A2188M0*# VR = 385 V DC 68 22 × 25 980 1950 1560 1.19 0.61 B43501A3686M0*# 100 22 × 30 660 1330 1060 1.54 0.79 B43501A3107M0*# 100 25 × 25 660 1330 1060 1.56 0.80 B43501B3107M0*# 150 22 × 40 440 890 710 2.15 1.10 B43501A3157M0*# 150 25 × 30 440 890 710 2.03 1.04 B43501B3157M0*# 220 25 × 40 300 610 490 2.76 1.41 B43501A3227M0*# 220 30 × 30 300 610 490 2.74 1.40 B43501B3227M0*# 330 25 × 50 200 410 330 3.68 1.88 B43501B3337M0*# 330 30 × 40 200 410 330 3.72 1.90 B43501A3337M0*# 470 30 × 50 140 290 230 4.78 2.44 B43501B3477M0*# 470 35 × 40 140 290 230 4.90 2.50 B43501A3477M0*# 560 30 × 55 120 240 190 5.40 2.76 B43501B3567M0*# 560 35 × 45 120 240 190 5.52 2.82 B43501A3567M0*# 680 35 × 50 100 200 160 6.13 3.13 B43501A3687M0*# B43501 Long useful life 85 °C Page 10 of 21Please read Cautions and warnings and Important notes at the end of this document.

3) 120-Hz conversion factor of ripple current: I AC (120 Hz) = 1.03 IAC (100 Hz) Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d × l mm ESRtyp 100 Hz 20 °C mΩ ESRmax 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R3) 100 Hz 85 °C A Ordering code (composition see below) Composition of ordering code * = Insulation feature # = Terminal style 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) VR = 400 V DC 68 22 × 25 980 1950 1560 1.19 0.61 B43501A9686M0*# 100 22 × 30 660 1330 1060 1.54 0.79 B43501A9107M0*# 100 25 × 25 660 1330 1060 1.56 0.80 B43501B9107M0*# 120 22 × 35 550 1100 890 1.80 0.92 B43501A9127M0*# 150 22 × 40 440 890 710 2.15 1.10 B43501A9157M0*# 150 30 × 25 440 890 710 2.15 1.10 B43501B9157M0*# 180 30 × 30 370 740 590 2.45 1.25 B43501A9187M0*# 220 25 × 40 300 610 490 2.76 1.41 B43501A9227M0*# 220 30 × 30 300 610 490 2.70 1.38 B43501C9227M0*# 270 25 × 45 250 490 400 3.19 1.63 B43501B9277M0*# 270 30 × 35 250 490 400 3.17 1.62 B43501A9277M0*# 270 35 × 30 250 490 400 3.33 1.70 B43501C9277M0*# 330 25 × 55 200 410 330 3.84 1.96 B43501B9337M0*# 330 30 × 45 200 410 330 3.92 2.00 B43501A9337M0*# 330 35 × 30 200 410 330 3.68 1.88 B43501C9337M0*# 390 30 × 45 170 340 280 4.17 2.13 B43501B9397M0*# 390 35 × 35 170 340 280 4.21 2.15 B43501C9397M0*# 470 30 × 50 140 290 230 4.78 2.44 B43501B9477M0*# 470 35 × 45 140 290 230 5.09 2.60 B43501A9477M0*# 560 35 × 45 120 240 190 5.52 2.82 B43501B9567M0*# 680 35 × 55 100 200 160 6.52 3.33 B43501A9687M0*# VR = 420 V DC 100 22 × 30 1330 1990 1600 1.54 0.79 B43501A0107M0*# 100 25 × 25 1330 1990 1600 1.56 0.80 B43501E0107M0*# 120 25 × 30 1110 1660 1330 1.84 0.94 B43501A0127M0*# 150 22 × 40 880 1330 1070 2.11 1.08 B43501A0157M0*# 150 25 × 35 880 1330 1070 2.17 1.11 B43501E0157M0*# 180 25 × 35 740 1110 890 2.37 1.21 B43501A0187M0*# 180 30 × 30 740 1110 890 2.46 1.26 B43501E0187M0*# 220 25 × 40 600 910 730 2.76 1.41 B43501A0227M0*# 220 30 × 35 600 910 730 2.86 1.46 B43501E0227M0*# B43501 Long useful life 85 °C Page 11 of 21Please read Cautions and warnings and Important notes at the end of this document.

4) 120-Hz conversion factor of ripple current: I AC (120 Hz) = 1.03 IAC (100 Hz) Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d × l mm ESRtyp 100 Hz 20 °C mΩ ESRmax 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R4) 100 Hz 85 °C A Ordering code (composition see below) Composition of ordering code * = Insulation feature # = Terminal style 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) VR = 420 V DC 270 25 × 55 490 740 590 3.46 1.77 B43501B0277M0*# 270 30 × 35 490 740 590 3.17 1.62 B43501A0277M0*# 270 35 × 30 490 740 590 3.35 1.71 B43501E0277M0*# 330 30 × 45 400 610 490 3.84 1.96 B43501A0337M0*# 330 35 × 35 400 610 490 3.88 1.98 B43501E0337M0*# 390 30 × 50 340 520 410 4.35 2.22 B43501A0397M0*# 470 30 × 55 280 430 340 4.95 2.53 B43501B0477M0*# 470 35 × 45 280 430 340 5.05 2.58 B43501A0477M0*# 560 35 × 50 240 360 290 5.74 2.93 B43501A0567M0*# VR = 450 V DC 47 22 × 25 2820 4240 3390 0.99 0.51 B43501A5476M0*# 68 22 × 30 1950 2930 2350 1.27 0.65 B43501A5686M0*# 68 25 × 25 1950 2930 2350 1.29 0.66 B43501B5686M0*# 100 22 × 35 1330 1990 1600 1.62 0.83 B43501D5107M0*# 100 25 × 30 1330 1990 1600 1.68 0.86 B43501B5107M0*# 100 30 × 25 1330 1990 1600 1.76 0.90 B43501C5107M0*# 150 25 × 35 880 1330 1070 2.15 1.10 B43501C5157M0*# 150 30 × 30 880 1330 1070 2.23 1.14 B43501B5157M0*# 180 30 × 35 740 1100 890 2.58 1.32 B43501A5187M0*# 220 25 × 50 600 910 730 3.01 1.54 B43501B5227M0*# 220 30 × 35 600 910 730 2.86 1.46 B43501C5227M0*# 270 25 × 55 490 740 590 3.46 1.77 B43501B5277M0*# 270 30 × 40 490 740 590 3.33 1.70 B43501C5277M0*# 270 35 × 35 490 740 590 3.50 1.79 B43501D5277M0*# 330 30 × 50 400 610 490 3.99 2.04 B43501B5337M0*# 330 35 × 40 400 610 490 4.11 2.10 B43501A5337M0*# 390 30 × 55 340 520 410 4.50 2.30 B43501A5397M0*# 390 35 × 45 340 520 410 4.52 2.31 B43501B5397M0*# 470 35 × 50 280 430 340 5.29 2.70 B43501A5477M0*# 560 35 × 55 240 360 290 5.70 2.91 B43501A5567M0*# B43501 Long useful life 85 °C Page 12 of 21Please read Cautions and warnings and Important notes at the end of this document.

5) 120-Hz conversion factor of ripple current: I AC (120 Hz) = 1.03 IAC (100 Hz) Technical data and ordering codes CR 100 Hz 20 °C µF Case dimensions d × l mm ESRtyp 100 Hz 20 °C mΩ ESRmax 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R5) 100 Hz 85 °C A Ordering code (composition see below) Composition of ordering code * = Insulation feature # = Terminal style 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) VR = 500 V DC 47 22 × 25 2820 4240 3390 0.99 0.51 B43501A6476M0*# 68 22 × 30 1950 2930 2350 1.27 0.65 B43501A6686M0*# 68 25 × 25 1950 2930 2350 1.27 0.65 B43501B6686M0*# 100 25 × 35 1330 1990 1600 1.68 0.86 B43501A6107M0*# 100 30 × 25 1330 1990 1600 1.68 0.86 B43501B6107M0*# 150 25 × 45 880 1330 1070 2.15 1.10 B43501B6157M0*# 150 30 × 30 880 1330 1070 2.15 1.10 B43501A6157M0*# 180 25 × 50 740 1100 890 2.62 1.35 B43501A6187M0*# 180 30 × 35 740 1100 890 2.62 1.35 B43501B6187M0*# 220 30 × 40 600 910 730 2.92 1.50 B43501A6227M0*# 220 35 × 35 600 910 730 2.92 1.50 B43501B6227M0*# 270 30 × 50 490 740 590 3.33 1.70 B43501A6277M0*# 270 35 × 35 490 740 590 3.33 1.70 B43501B6277M0*# 330 30 × 55 400 610 490 3.99 2.04 B43501A6337M0*# 330 35 × 45 400 610 490 3.99 2.04 B43501B6337M0*# 390 35 × 50 340 520 410 4.50 2.30 B43501A6397M0*# 470 35 × 55 280 430 340 5.29 2.70 B43501A6477M0*# B43501 Long useful life 85 °C Page 13 of 21Please read Cautions and warnings and Important notes at the end of this document.

1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life graphs. Useful life depending on ambient temperature TA under ripple current operating conditions at VR ≤ 450 V1) Voltage derating (0.93 VR) enables 105 °C operation Useful life depending on ambient temperature TA under ripple current operating conditions at VR = 500 V1) B43501 Long useful life 85 °C Page 14 of 21Please read Cautions and warnings and Important notes at the end of this document.

Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C B43501 Long useful life 85 °C Page 15 of 21Please read Cautions and warnings and Important notes at the end of this document.

The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. B43501 Long useful life 85 °C Page 16 of 21Please read Cautions and warnings and Important notes at the end of this document.

The table below summarize the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Reference Chapter "General technical information" Polarity Make sure that polar capacitors are connected with the right polarity. "Basic construction of aluminum electrolytic capacitors" Reverse voltage Voltages polarity classes should be prevented by connecting a diode. 3.1.6 "Reverse voltage" Upper category temperature Do not exceed the upper category temperatur. 7.2 "Maximum permissible operating temperature" Maintenance Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. "Maintenance" Mounting position of screw terminal capacitors Do not mount the capacitor with the terminals (safety vent) upside down. 11.1 "Mounting positions of capacitors with screw terminals" Mounting of single-ended capacitors The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. 11.4 "Mounting considerations for single-ended capacitors" Robustness of terminals The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2 Nm M6: 2.5 Nm 11.3 "Mounting torques" Soldering Do not exceed the specified time or temperature limits during soldering. 11.5 "Soldering" B43501 Long useful life 85 °C Page 17 of 21Please read Cautions and warnings and Important notes at the end of this document.

Topic Safety information Reference Chapter "General technical information" Soldering, cleaning agents Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. 11.6 "Cleaning agents" Passive flammability Avoid external energy, such as fire or electricity. 8.1 "Passive flammability" Active flammability Avoid overload of the capacitors. 8.2 "Active flammability" Reference Chapter "Capacitors with screw terminals" Breakdown strength of insulating sleeves Do not damage the insulating sleeve, especially when ring clips are used for mounting. "Screw terminals - accessories" B43501 Long useful life 85 °C Page 18 of 21Please read Cautions and warnings and Important notes at the end of this document.

C Capacitance Kapazität CR Rated capacitance Nennkapazität CS Series capacitance Serienkapazität CS,T Series capacitance at temperature T Serienkapazität bei Temperatur T Cf Capacitance at frequency f Kapazität bei Frequenz f d Case diameter, nominal dimension Gehäusedurchmesser, Nennmaß dmax Maximum case diameter Maximaler Gehäusedurchmesser ESL Self-inductance Eigeninduktivität ESR Equivalent series resistance Ersatzserienwiderstand ESRf Equivalent series resistance at frequency f Ersatzserienwiderstand bei Frequenz f ESRT Equivalent series resistance at temperature T Ersatzserienwiderstand bei Temperatur T f Frequency Frequenz I Current Strom IAC Alternating current (ripple current) Wechselstrom IAC,rms Root-mean-square value of alternating current Wechselstrom, Effektivwert IAC,f Ripple current at frequency f Wechselstrom bei Frequenz f IAC,max Maximum permissible ripple current Maximal zulässiger Wechselstrom IAC,R Rated ripple current Nennwechselstrom IAC,R (B) Rated ripple current for base cooling Nennwechselstromstrom für Bodenkühlung Ileak Leakage current Ableitstrom Ileak,op Operating leakage current Ableitstrom bei Betrieb l Case length, nominal dimension Gehäuselänge, Nennmaß lmax Maximum case length (without terminals and mounting stud) Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) R Resistance Widerstand Rins Insulation resistance Isolationswiderstand Rsymm Balancing resistance Symmetrierwiderstand T Temperature Temperatur ΔT Temperature difference Temperaturdifferenz TA Ambient temperature Umgebungstemperatur TC Case temperature Gehäusetemperatur TB Capacitor base temperature Temperatur des Becherbodens t Time Zeit Δt Period Zeitraum tb Service life (operating hours) Brauchbarkeitsdauer (Betriebszeit) B43501 Long useful life 85 °C Page 19 of 21Please read Cautions and warnings and Important notes at the end of this document.

VF Forming voltage Formierspannung Vop Operating voltage Betriebsspannung VR Rated voltage, DC voltage Nennspannung, Gleichspannung VS Surge voltage Spitzenspannung XC Capacitive reactance Kapazitiver Blindwiderstand XL Inductive reactance Induktiver Blindwiderstand Z Impedance Scheinwiderstand ZT Impedance at temperature T Scheinwiderstand bei Temperatur T tan δ Dissipation factor Verlustfaktor λ Failure rate Ausfallrate ε0 Absolute permittivity Elektrische Feldkonstante εr Relative permittivity Dielektrizitätszahl ω Angular velocity; 2 π f Kreisfrequenz; 2 π f Notes All dimensions are given in mm. B43501 Long useful life 85 °C Page 20 of 21Please read Cautions and warnings and Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Ma- terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de- tailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "General Terms of Delivery for Products and Services in the Electrical In- dustry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Important notes Page 21 of 21