B43416C6207A000

B43415C3218A000 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Aluminum electrolytic capacitors Capacitors for pulse applications Series/Type: B43415, B43416 Date: November 2008 © EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Professional flash light generators

Features

High charge/discharge proof, polar Low leakage current Low dissipation factor RoHS-compatible Construction Aluminum case, fully insulated Safety vent Terminals Snap-in Solder lug B43415 B43416 Overview Temperature Series Useful life VR CR °C V DC µF +60 (max. case temp.) B43415 Solder lug > 50000 discharges B43416 Snap-in 200 ... 1500 Capacitors for pulse applications B43415, B43416 Compact up to 60 °C Page 2 of 16Please read Cautions and warnings and Important notes at the end of this document.

Specifications and characteristics in brief Rated voltage VR 300 ... 500 V DC Rated capacitance CR 200 ... 6600 µF Capacitance tolerance ΔCR 10/+20% Leakage current (5 min, 20 °C) Ileak Dissipation factor tan δ 15% Useful life > 50000 discharges at: Requirements: Case temperature ≤ 60 °C ΔC/C ≤ ±20% of initial value Discharge repetition rate ≥ 2 s ESR ≤ 3 times initial specified limit Max. discharges per week ≤ 5000 Ileak ≤ initial specified limit Charge resistance >10 Ω Discharge resistance >0.5 Ω Vibration resistance test To IEC 60068-2-6, test Fc: Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz, acceleration max. 5 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. If terminals are used for mechanical fixation of the capacitor, the vibration resistance can be reduced depending on capacitor size. IEC climatic category VR ≤ 400 V DC: 40/060/56 ( 40 °C/+60 °C/56 days damp heat test) VR > 400 V DC: 25/060/56 ( 25 °C/+60 °C/56 days damp heat test) B43415, B43416 Compact up to 60 °C Page 3 of 16Please read Cautions and warnings and Important notes at the end of this document.

B43415, solder lug terminals Dimensions, weights and packing units d × l mm Lead spacing (LS) mm Approx. weight g Packing units pcs. 35 × 55 10.0 75 59 35 × 65 10.0 88 59 40 × 65 10.0 115 42 40 × 70 10.0 130 42 40 × 80 10.0 150 42 40 × 90 10.0 160 42 40 × 105 10.0 180 42 40 × 110 10.0 190 42 50 × 80 20.0 230 28 50 × 100 20.0 270 28 B43415 Compact up to 60°C Page 4 of 16Please read Cautions and warnings and Important notes at the end of this document.

Technical data and ordering codes B43415 CR 100 Hz 20 °C µF Case dimensions d × l mm Ileak,max 5 min. 20 °C mA Ordering code VR = 300 V DC 2100 35 × 65 3.4 B43415C3218A000 3000 40 × 70 4.4 B43415C3308A000 4700 40 × 105 6.0 B43415C3478A000 6600 50 × 100 7.7 B43415C3668A000 VR = 330 V DC 2100 40 × 65 3.7 B43415C8218A000 3000 40 × 80 4.7 B43415C8308A000 3800 40 × 105 5.6 B43415C8388A000 5600 50 × 100 7.3 B43415C8568A000 VR = 360 V DC 2100 40 × 65 3.9 B43415C9218A000 3000 40 × 90 5.0 B43415C9308A000 3800 40 × 110 5.9 B43415C9388A000 4900 50 × 100 7.6 B43415C9498A000 VR = 400 V DC 1000 35 × 55 2.5 B43415C9108A000 2100 40 × 80 4.2 B43415D9218A000 3000 40 × 110 5.4 B43415D9308A000 3800 50 × 100 6.4 B43415D9388A000 VR = 500 V DC 1000 40 × 65 2.9 B43415C6108A000 2100 50 × 80 4.9 B43415C6218A000 2500 50 × 100 5.8 B43415C6258A000 B43415 Compact up to 60°C Page 5 of 16Please read Cautions and warnings and Important notes at the end of this document.

B43416, snap-in terminals Dimensions, weights and packing units d × l mm Approx. weight g Packing units pcs. 25 × 45 25 130 30 × 40 36 80 30 × 50 46 80 35 × 45 56 60 35 × 50 70 60 35 x 55 81 60 B43416 Compact up to 60°C Page 6 of 16Please read Cautions and warnings and Important notes at the end of this document.

Technical data and ordering codes B43416 CR 100 Hz 20 °C µF Case dimensions d × l mm Ileak,max 5 min. 20 °C mA Ordering code VR = 300 V DC 1000 30 × 50 2.0 B43416C3108A000 1500 35 × 50 2.7 B43416C3158A000 VR = 330 V DC 1000 35 × 45 2.2 B43416C8108A000 1200 35 × 50 2.5 B43416C8128A000 VR = 360 V DC 560 30 × 40 1.5 B43416C9567A000 1100 35 × 50 2.6 B43416C9118A000 1200 35 × 55 2.8 B43416C9128A000 VR = 400 V DC 330 25 × 45 1.2 B43416C9337A000 700 35 × 45 2.0 B43416C9707A000 900 35 × 55 2.6 B43416C9907A000 VR = 500 V DC 200 25 × 45 0.9 B43416C6207A000 560 35 × 50 2.0 B43416C6567A000 600 35 × 55 2.1 B43416C6607A000 B43416 Compact up to 60°C Page 7 of 16Please read Cautions and warnings and Important notes at the end of this document.

Packing of snap-in capacitors Packing of solder lug capacitors For ecological reasons the packing is pure cardboard. B43415, B43416 Compact up to 60 °C Page 8 of 16Please read Cautions and warnings and Important notes at the end of this document.

AC capacitance versus temperature VR = 350 V DC Typical behaviour Dissipation factor tan δ versus temperature VR = 350 V DC, measuring frequency = 120 Hz Typical behaviour Leakage current Ileak versus temperature Measurement duration = 5 minutes Typical behaviour B43415, B43416 Compact up to 60 °C Page 9 of 16Please read Cautions and warnings and Important notes at the end of this document.

Please use the questionnaire when having other, improved or additional technical requirements which cannot be covered by our standard series. The characteristic data listed in the questionnaire below are essentially the most important information for determining design dimensions of electrolytic capacitors for professional photo flash applications. Rated capacitance per capacitor µF Rated voltage per capacitor V DC Charge/discharge voltage / V Required dimensions: Diameter (max.) mm Length (max.) mm Style of terminals Ambient temperature ° C Method of cooling Discharge conditions Internal resistance of the discharge tube (if applicable) Ω Charging resistance (series resistance) Ω No. of capacitors in series No. of capacitors in parallel Flash sequence Pause periods Other special operating conditions Expected useful life flashes Annual demand of capacitors For any further support, please contact your nearest EPCOS representative. B43415, B43416 Compact up to 60 °C Page 10 of 16Please read Cautions and warnings and Important notes at the end of this document.

The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. B43415, B43416 Compact up to 60 °C Page 11 of 16Please read Cautions and warnings and Important notes at the end of this document.

The table below summarize the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Reference Chapter "General technical information" Polarity Make sure that polar capacitors are connected with the right polarity. "Basic construction of aluminum electrolytic capacitors" Reverse voltage Voltages polarity classes should be prevented by connecting a diode. 3.1.6 "Reverse voltage" Upper category temperature Do not exceed the upper category temperatur. 7.2 "Maximum permissible operating temperature" Maintenance Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. "Maintenance" Mounting position of screw terminal capacitors Do not mount the capacitor with the terminals (safety vent) upside down. 11.1 "Mounting positions of capacitors with screw terminals" Mounting of single-ended capacitors The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. 11.4 "Mounting considerations for single-ended capacitors" Robustness of terminals The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2 Nm M6: 2.5 Nm 11.3 "Mounting torques" Soldering Do not exceed the specified time or temperature limits during soldering. 11.5 "Soldering" B43415, B43416 Compact up to 60 °C Page 12 of 16Please read Cautions and warnings and Important notes at the end of this document.

Topic Safety information Reference Chapter "General technical information" Soldering, cleaning agents Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. 11.6 "Cleaning agents" Passive flammability Avoid external energy, such as fire or electricity. 8.1 "Passive flammability" Active flammability Avoid overload of the capacitors. 8.2 "Active flammability" Reference Chapter "Capacitors with screw terminals" Breakdown strength of insulating sleeves Do not damage the insulating sleeve, especially when ring clips are used for mounting. "Screw terminals - accessories" B43415, B43416 Compact up to 60 °C Page 13 of 16Please read Cautions and warnings and Important notes at the end of this document.

C Capacitance Kapazität CR Rated capacitance Nennkapazität CS Series capacitance Serienkapazität CS,T Series capacitance at temperature T Serienkapazität bei Temperatur T Cf Capacitance at frequency f Kapazität bei Frequenz f d Case diameter, nominal dimension Gehäusedurchmesser, Nennmaß dmax Maximum case diameter Maximaler Gehäusedurchmesser ESL Self-inductance Eigeninduktivität ESR Equivalent series resistance Ersatzserienwiderstand ESRf Equivalent series resistance at frequency f Ersatzserienwiderstand bei Frequenz f ESRT Equivalent series resistance at temperature T Ersatzserienwiderstand bei Temperatur T f Frequency Frequenz I Current Strom IAC Alternating current (ripple current) Wechselstrom IAC,rms Root-mean-square value of alternating current Wechselstrom, Effektivwert IAC,f Ripple current at frequency f Wechselstrom bei Frequenz f IAC,max Maximum permissible ripple current Maximal zulässiger Wechselstrom IAC,R Rated ripple current Nennwechselstrom IAC,R (B) Rated ripple current for base cooling Nennwechselstromstrom für Bodenkühlung Ileak Leakage current Ableitstrom Ileak,op Operating leakage current Ableitstrom bei Betrieb l Case length, nominal dimension Gehäuselänge, Nennmaß lmax Maximum case length (without terminals and mounting stud) Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) R Resistance Widerstand Rins Insulation resistance Isolationswiderstand Rsymm Balancing resistance Symmetrierwiderstand T Temperature Temperatur ΔT Temperature difference Temperaturdifferenz TA Ambient temperature Umgebungstemperatur TC Case temperature Gehäusetemperatur TB Capacitor base temperature Temperatur des Becherbodens t Time Zeit Δt Period Zeitraum tb Service life (operating hours) Brauchbarkeitsdauer (Betriebszeit) B43415, B43416 Compact up to 60 °C Page 14 of 16Please read Cautions and warnings and Important notes at the end of this document.

VF Forming voltage Formierspannung Vop Operating voltage Betriebsspannung VR Rated voltage, DC voltage Nennspannung, Gleichspannung VS Surge voltage Spitzenspannung XC Capacitive reactance Kapazitiver Blindwiderstand XL Inductive reactance Induktiver Blindwiderstand Z Impedance Scheinwiderstand ZT Impedance at temperature T Scheinwiderstand bei Temperatur T tan δ Dissipation factor Verlustfaktor λ Failure rate Ausfallrate ε0 Absolute permittivity Elektrische Feldkonstante εr Relative permittivity Dielektrizitätszahl ω Angular velocity; 2 π f Kreisfrequenz; 2 π f Notes All dimensions are given in mm. B43415, B43416 Compact up to 60 °C Page 15 of 16Please read Cautions and warnings and Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Ma- terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de- tailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "General Terms of Delivery for Products and Services in the Electrical In- dustry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Important notes Page 16 of 16