MBR41H100CT_15 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

© Semiconductor Components Industries, LLC, 2015 January, 2015 − Rev. 9

1 Publication Order Number:

MBR41H100CT, NRVBB41H100CT Series Switch-mode Power Rectifier

100 V, 40 A

  • Low Forward V oltage: 0.67 V @ 125°C
  • Low Power Loss/High Efficiency
  • High Surge Capacity
  • 175°C Operating Junction Temperature
  • 40 A Total (20 A Per Diode Leg)
  • Guard−Ring for Stress Protection
  • NRVBB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
  • MBR41H100CTH and MBRB41H100CT−1H are Halide−Free

Applications

  • Power Supply − Output Rectification
  • Power Management
  • Instrumentation Mechanical Characteristics:
  • Case: Epoxy, Molded
  • Epoxy Meets UL 94 V−0 @ 0.125 in
  • Weight (Approximately): 1.9 Grams (T O−220)

1.7 Grams (D2PAK)

1.5 Grams (TO−262)

  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220 CASE 221A STYLE 6 2, 4 MARKING DIAGRAMS AYWW B41H100x AKA A = Assembly Location Y = Year WW = Work Week x = G or H G = Pb−Free Package H = Halide−Free Package AKA = Polarity Designator www.onsemi.com I2PAK (TO−262) CASE 418D STYLE 3 AYWW B41H100x AKA 1 2 D2PAK 3 CASE 418B STYLE 3 AYWW B41H100G AKA See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.

ORDERING INFORMATION

MBR41H100CT, NRVBB41H100CT Series www.onsemi.com MAXIMUM RATINGS (Per Diode Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 V Average Rectified Forward Current (Rated VR) TC = 150°C IF(AV) A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 145°C IFRM A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 350 A Operating Junction Temperature (Note 1) TJ +175 °C Storage Temperature Tstg /C004265 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V//C0109s Controlled Avalanche Energy (see test conditions in Figures 10 and 11) WAVAL 400 mJ ESD Ratings: Machine Model = C Human Body Model = 3B > 400 > 8000 V Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP D/dTJ < 1/R/C0113JA. THERMAL CHARACTERISTICS (Per Diode Leg) Characteristic Symbol Value Unit Maximum Thermal Resistance Junction−to−Case Junction−to−Ambient R/C0113JC R/C0113JA 2.0 °C/W ELECTRICAL CHARACTERISTICS (Per Diode Leg) Characteristic Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 2) (IF = 20 A, TC = 25°C) (IF = 20 A, TC = 125°C) (IF = 40 A, TC = 25°C) (IF = 40 A, TC = 125°C) vF 0.80 0.67 0.90 0.76 V Maximum Instantaneous Reverse Current (Note 2) (Rated DC Voltage, TC = 125°C) (Rated DC Voltage, TC = 25°C) iR 0.01 mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width = 300 /C0109s, Duty Cycle ≤ 2.0%.

Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current Figure 5. Current Derating Figure 6. Forward Power Dissipation

10 TJ = 125°C

Figure 10. Test Circuit Figure 11. Current−Voltage Waveforms when the switch was being opened.

2 LI 2

MBR41H100CT, NRVBB41H100CT Series www.onsemi.com Device Package Shipping† MBR41H100CTG TO−220 (Pb−Free)

50 Units / Rail

MBR41H100CTH TO−220 (Halide−Free) MBRB41H100CT−1G I2PAK (Pb−Free) MBRB41H100CT−1H (In Development) I2PAK (Halide−Free) (Pb−Free)

800 Units / Tape & Reel

NRVBB41H100CTT4G* D2PAK 3 (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NRVBB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified a nd PPAP Capable.

MBR41H100CT, NRVBB41H100CT Series www.onsemi.com PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AH NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.415 9.66 10.53 C 0.160 0.190 4.07 4.83 D 0.025 0.038 0.64 0.96 F 0.142 0.161 3.61 4.09 G 0.095 0.105 2.42 2.66 H 0.110 0.161 2.80 4.10 J 0.014 0.024 0.36 0.61 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE−T− C ST U R J STYLE 6: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE

MBR41H100CT, NRVBB41H100CT Series www.onsemi.com PACKAGE DIMENSIONS SEATING PLANE S G D −T− M0.13 (0.005) T 231 3 PL K J H V E C A DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.340 0.380 8.64 9.65 B 0.380 0.405 9.65 10.29 C 0.160 0.190 4.06 4.83 D 0.020 0.035 0.51 0.89 E 0.045 0.055 1.14 1.40 G 0.100 BSC 2.54 BSC H 0.080 0.110 2.03 2.79 J 0.018 0.025 0.46 0.64 K 0.090 0.110 2.29 2.79 S 0.575 0.625 14.60 15.88 V 0.045 0.055 1.14 1.40 −B− MB W W NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. F 0.310 0.350 7.87 8.89 L 0.052 0.072 1.32 1.83 M 0.280 0.320 7.11 8.13 N 0.197 REF 5.00 REF P 0.079 REF 2.00 REF R 0.039 REF 0.99 REF M L F M L F M L F VARIABLE CONFIGURATION ZONE R N P U VIEW W−W VIEW W−W VIEW W−W 12 3 D2PAK 3 CASE 418B−04 ISSUE K STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* 8.38 5.080 DIMENSIONS: MILLIMETERS PITCH 16.155 1.016 10.49 3.504

MBR41H100CT, NRVBB41H100CT Series www.onsemi.com PACKAGE DIMENSIONS I2PAK (TO−262) CASE 418D ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. −T− W G K A C E V J H 123 SEATING PLANE D 3 PL DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.335 0.380 8.51 9.65 B 0.380 0.406 9.65 10.31 C 0.160 0.185 4.06 4.70 D 0.026 0.035 0.66 0.89 E 0.045 0.055 1.14 1.40 G 0.100 BSC 2.54 BSC H 0.094 0.110 2.39 2.79 J 0.013 0.025 0.33 0.64 S 0.390 REF 9.90 REF V 0.045 0.070 1.14 1.78 W 0.522 0.551 13.25 14.00 −B− MBM0.13 (0.005) T S F F 0.122 REF 3.10 REF K 0.500 0.562 12.70 14.27 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 MBR41H100CT/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.