B41689_17 TDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 21
Technical content
Aluminum electrolytic capacitors Axial-lead and soldering star capacitors Series/Type: B41689, B41789 Date: December 2016 © EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.
Applications
Features
High vibration stability, special design with high vibration stability up to 60g available upon request Very high ripple current capability Long useful life, 10000 h at up to 125°C Low ESR also at rated voltage 63 V DC SIKOREL design storage for up to 15 years at a temperature of up to 35°C RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case with insulating sleeve Negative pole connected to case Version without insulation available upon request Terminals Axial leads, welded to capacitor case and cover disc Soldering star option for upright mounting on PCB Alternative axial-lead design with double-sided plates for horizontal mounting available upon request Taping and packing Axial-lead capacitors will be delivered in pallet package Capacitors with d× l ≤ 16 × 39 mm are also available taped on reel Soldering star capacitors are packed in blister trays Axial-lead and soldering star capacitors B41689, B41789 Very high ripple current up to 150°C P a g e2o f2 1Please read Cautions and warnings and Important notes at the end of this document.
1) If optimum circuit design is used, the values are lower by 30%. 2) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. 3) ESR max at 100 Hz, 20°C Specifications and characteristics in brief Rated voltage VR 25 ... 63 V DC Surge voltage VS 1.15 VR Rated capacitance CR 360 ... 4500 μF Capacitance tolerance 10/+30% Q Leakage current Ileak (5 min, 20°C) Self-inductance ESL1) Diameter d (mm) 16 18 20 21 Terminals Length l (mm) Approx. ESL (nH) axial 25 26 30 29 38 30 29 34 39 35 31 36 41 39 33 38 45 49 50 soldering star 25 7 8 30 8 10 11 35 9 10.5 12 39 9 11 13 49 14 Useful life2) Requirements: 150 °C; VR; 0.5 IAC,R > 2000 h ΔC/C ≤ 30% of initial value 125 °C; VR;I AC,max > 4000 h Ileak ≤ initial specified limit 125 °C; VR;I AC,R > 10000 h ESR ≤ 3 times initial specified limit3) Voltage endurance test 125 °C; VR 4000 h for VR ≤ 4 0VD C 3000 h for VR =6 3VD C Post test requirements ΔC/C ESR I leak ≤ 10% of initial value ≤ 1.3 times initial specified limit3) ≤ initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 2 kHz, displace- ment amplitude max. 1.5 mm, acceleration max. 20g, duration 3× 2h . Capacitor mounted by its wire leads at a distance of (6±1) mm from the case and additionally clamped by the case. IEC climatic category To IEC 60068-1: 55/125/56 (55 °C/+125 °C/56 days damp heat test) Detail specification Sectional specification Similar to CECC 30301-802 IEC 60384-4 B41689, B41789 Very high ripple current up to 150°C P a g e3o f2 1Please read Cautions and warnings and Important notes at the end of this document.
B41689, Axial-lead capacitors Dimensional drawing Dimensions, weights and packing units d × l dmax × Imax Approx. weight Packing units (pcs.) mm mm g Pallet Reel 16 × 25 16.5 × 25.5 7.4 180 250 16 × 30 16.5 × 30.5 8.9 180 250 16 × 35 16.5 × 35.5 10.4 180 250 16 × 39 16.5 × 40 11.7 180 250 18 × 25 18.5 × 25.5 9.3 160 18 × 30 18.5 × 30.5 11.1 160 18 × 35 18.5 × 35.5 12.8 160 18 × 39 18.5 × 40 14.7 160 20 × 29 20.5 × 29.5 13.5 140 21 × 30 21.5 × 30.5 16.5 140 21 × 35 21.5 × 35.5 17.0 140 21 × 39 21.5 × 40 20.0 140 21 × 49 21.5 × 50 25.0 110 B41689, B41789 Very high ripple current up to 150°C P a g e4o f2 1Please read Cautions and warnings and Important notes at the end of this document.
B41789, Soldering star capacitors Dimensional drawings Mounting holes d = 16 mm ... 21 mm Dimensions, weights and packing units d × l dmax × Imax c ±0.1 e ±0.1 Approx. weight Packing units mm mm mm mm g pcs. 16 × 25 17.5 × 27 16.5 3.0 7.9 300 16 × 30 17.5 × 32 16.5 3.0 9.4 300 16 × 35 17.5 × 37 16.5 3.0 10.9 200 18 × 25 19.5 × 27 18.5 3.0 9.9 300 18 × 30 19.5 × 32 18.5 3.0 11.8 300 18 × 35 19.5 × 37 18.5 3.0 13.2 200 21 × 30 22.5 × 32 21.5 3.5 17.5 468 21 × 35 22.5 × 37 21.5 3.5 18.3 324 B41689, B41789 Very high ripple current up to 150°C P a g e5o f2 1Please read Cautions and warnings and Important notes at the end of this document.
Overview of available types VR (V DC) 25 40 63 Case dimensions d× l (mm) CR (μF) 360 16 × 25 470 18 × 25 510 16 × 30 560 16 × 25 620 16 × 35 18 × 30 680 18 × 25 720 16 × 30 750 16 × 39 820 16 × 35 18 × 35 900 18 × 30 910 18 × 39 21 × 30 1000 16 × 25 16 × 39 1100 21 × 35 1200 18 × 25 20 × 29 1300 16 × 30 21 × 39 1400 18 × 39 1500 16 × 35 1700 18 × 30 1800 16 × 39 21 × 49 1900 20 × 29 2000 21 × 39 2200 18 × 39 2700 21 × 49 3300 21 × 39 4500 21 × 49 B41689, B41789 Very high ripple current up to 150°C P a g e6o f2 1Please read Cautions and warnings and Important notes at the end of this document.
Case dimensions and ordering codes CR 120 Hz 20 °C μF Case dimensions d × l mm Ordering code Axial pallet Ordering code Axial reel Ordering code Soldering star ∇ Increased ripple current due to optimized thermal design VR =2 5VD C 1000 16 × 25 B41689A5108Q001 B41689A5108Q003 B41789A5108Q001 1000 ∇ 16 × 25 B41689K5108Q001 B41689K5108Q003 B41789K5108Q001 1200 18 × 25 B41689A5128Q001 B41789A5128Q001 1200 ∇ 18 × 25 B41689K5128Q001 B41789K5128Q001 1300 16 × 30 B41689A5138Q001 B41689A5138Q003 B41789A5138Q001 1300 ∇ 16 × 30 B41689K5138Q001 B41689K5138Q003 B41789K5138Q001 1500 16 × 35 B41689A5158Q001 B41689A5158Q003 B41789A5158Q001 1500 ∇ 16 × 35 B41689K5158Q001 B41689K5158Q003 B41789K5158Q001 1700 18 × 30 B41689A5178Q001 B41789A5178Q001 1700 ∇ 18 × 30 B41689K5178Q001 B41789K5178Q001 1800 16 × 39 B41689A5188Q001 B41689A5188Q003 B41789A5188Q001 1800 ∇ 16 × 39 B41689K5188Q001 B41689K5188Q003 B41789K5188Q001 1900 20 × 29 B41689A5198Q001 1900 ∇ 20 × 29 B41689K5198Q001 2200 18 × 39 B41689A5228Q001 B41789A5228Q001 2200 ∇ 18 × 39 B41689K5228Q001 B41789K5228Q001 3300 21 × 39 B41689A5338Q001 B41789A5338Q001 3300 ∇ 21 × 39 B41689K5338Q001 B41789K5338Q001 4500 21 × 49 B41689A5458Q001 B41789A5458Q001 4500 ∇ 21 × 49 B41689K5458Q001 B41789K5458Q001 B41689, B41789 Very high ripple current up to 150°C P a g e7o f2 1Please read Cautions and warnings and Important notes at the end of this document.
Case dimensions and ordering codes CR 120 Hz 20 °C μF Case dimensions d × l mm Ordering code Axial pallet Ordering code Axial reel Ordering code Soldering star ∇ Increased ripple current due to optimized thermal design VR =4 0VD C 560 16 × 25 B41689A7567Q001 B41689A7567Q003 B41789A7567Q001 560 ∇ 16 × 25 B41689K7567Q001 B41689K7567Q003 B41789K7567Q001 680 18 × 25 B41689A7687Q001 B41789A7687Q001 680 ∇ 18 × 25 B41689K7687Q001 B41789K7687Q001 720 16 × 30 B41689A7727Q001 B41689A7727Q003 B41789A7727Q001 720 ∇ 16 × 30 B41689K7727Q001 B41689K7727Q003 B41789K7727Q001 820 16 × 35 B41689A7827Q001 B41689A7827Q003 B41789A7827Q001 820 ∇ 16 × 35 B41689K7827Q001 B41689K7827Q003 B41789K7827Q001 900 18 × 30 B41689A7907Q001 B41789A7907Q001 900 ∇ 18 × 30 B41689K7907Q001 B41789K7907Q001 1000 16 × 39 B41689A7108Q001 B41689A7108Q003 B41789A7108Q001 1000 ∇ 16 × 39 B41689K7108Q001 B41689K7108Q003 B41789K7108Q001 1200 20 × 29 B41689A7128Q001 1200 ∇ 20 × 29 B41689K7128Q001 1400 18 × 39 B41689A7148Q001 B41789A7148Q001 1400 ∇ 18 × 39 B41689K7148Q001 B41789K7148Q001 2000 21 × 39 B41689A7208Q001 B41789A7208Q001 2000 ∇ 21 × 39 B41689K7208Q001 B41789K7208Q001 2700 21 × 49 B41689A7278Q001 B41789A7278Q001 2700 ∇ 21 × 49 B41689K7278Q001 B41789K7278Q001 B41689, B41789 Very high ripple current up to 150°C P a g e8o f2 1Please read Cautions and warnings and Important notes at the end of this document.
Case dimensions and ordering codes CR 120 Hz 20 °C μF Case dimensions d × l mm Ordering code Axial pallet Ordering code Axial reel Ordering code Soldering star ∇ Increased ripple current due to optimized thermal design VR =6 3VD C 360 16 × 25 B41689B8367Q001 B41689B8367Q003 B41789B8367Q001 360 ∇ 16 × 25 B41689L8367Q001 B41689L8367Q003 B41789L8367Q001 470 18 × 25 B41689B8477Q001 B41789B8477Q001 470 ∇ 18 × 25 B41689L8477Q001 B41789L8477Q001 510 16 × 30 B41689B8517Q001 B41689B8517Q003 B41789B8517Q001 510 ∇ 16 × 30 B41689L8517Q001 B41689L8517Q003 B41789L8517Q001 620 16 × 35 B41689B8627Q001 B41689B8627Q003 B41789B8627Q001 620 18 × 30 B41689C8627Q001 B41789C8627Q001 620 ∇ 16 × 35 B41689L8627Q001 B41689L8627Q003 B41789L8627Q001 620 ∇ 18 × 30 B41689M8627Q001 B41789M8627Q001 750 16 × 39 B41689B8757Q001 B41689B8757Q003 B41789B8757Q001 750 ∇ 16 × 39 B41689L8757Q001 B41689L8757Q003 B41789L8757Q001 820 18 × 35 B41689B8827Q001 B41789B8827Q001 820 ∇ 18 × 35 B41689L8827Q001 B41789L8827Q001 910 18 × 39 B41689B8917Q001 B41789B8917Q001 910 21 × 30 B41689C8917Q001 B41789C8917Q001 910 ∇ 18 × 39 B41689L8917Q001 B41789L8917Q001 910 ∇ 21 × 30 B41689M8917Q001 B41789M8917Q001 1100 21 × 35 B41689B8118Q001 B41789B8118Q001 1100 ∇ 21 × 35 B41689L8118Q001 B41789L8118Q001 1300 21 × 39 B41689B8138Q001 B41789B8138Q001 1300 ∇ 21 × 39 B41689L8138Q001 B41789L8138Q001 1800 21 × 49 B41689B8188Q001 B41789B8188Q001 1800 ∇ 21 × 49 B41689L8188Q001 B41789L8188Q001 B41689, B41789 Very high ripple current up to 150°C P a g e9o f2 1Please read Cautions and warnings and Important notes at the end of this document.
1) Maximum ripple current at 125 °C capacitor case temperature TC (measured at aluminum case surface), when mounted to a heat sink. Further details available upon request. Technical data CR 120 Hz 20 °C μF Case dimensions d × l mm ESRmax 100 Hz 20 °C mΩ ESRmax 100 Hz 40 °C mΩ ESRmax 10 kHz 20 °C mΩ Zmax 100 kHz 20 °C mΩ IAC,max1) 10 kHz TC 125 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 150 °C A ∇ Increased ripple current due to optimized thermal design VR =2 5VD C 1000 16 × 25 98 565 53 50 9.2 5.7 3.5 1.7 1000 ∇ 16 × 25 98 565 53 50 10.1 6.0 3.6 1.8 1200 18 × 25 80 470 43 41 11.1 6.9 4.2 2.1 1200 ∇ 18 × 25 80 470 43 41 12.2 7.2 4.4 2.2 1300 16 × 30 75 435 41 39 11.4 7.1 4.3 2.2 1300 ∇ 16 × 30 75 435 41 39 12.5 7.4 4.5 2.2 1500 16 × 35 65 377 35 34 13.3 8.3 5.0 2.5 1500 ∇ 16 × 35 65 377 35 34 14.6 8.6 5.2 2.6 1700 18 × 30 57 332 31 29 14.1 8.8 5.3 2.7 1700 ∇ 18 × 30 57 332 31 29 15.5 9.1 5.5 2.8 1800 16 × 39 55 314 30 28 15.1 9.4 5.7 2.9 1800 ∇ 16 × 39 55 314 30 28 16.6 9.8 5.9 3.0 1900 20 × 29 52 297 28 27 14.5 9.1 5.5 2.7 1900 ∇ 20 × 29 52 297 28 27 16.0 9.5 5.7 2.9 2200 18 × 39 44 257 24 23 18.3 11.4 6.9 3.4 2200 ∇ 18 × 39 44 257 24 23 20.1 11.8 7.2 3.6 3300 21 × 39 31 172 17 16 21.0 13.1 7.9 4.0 3300 ∇ 21 × 39 31 172 17 16 23.2 13.6 8.3 4.1 4500 21 × 49 23 126 13 12 26.5 16.5 10.0 5.0 4500 ∇ 21 × 49 23 126 13 12 29.2 17.2 10.4 5.2 B41689, B41789 Very high ripple current up to 150°C Page 10 of 21Please read Cautions and warnings and Important notes at the end of this document.
2) Maximum ripple current at 125 °C capacitor case temperature TC (measured at aluminum case surface), when mounted to a heat sink. Further details available upon request. Technical data CR 120 Hz 20 °C μF Case dimensions d × l mm ESRmax 100 Hz 20 °C mΩ ESRmax 100 Hz 40 °C mΩ ESRmax 10 kHz 20 °C mΩ Zmax 100 kHz 20 °C mΩ IAC,max2) 10 kHz TC 125 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 150 °C A ∇ Increased ripple current due to optimized thermal design VR =4 0VD C 560 16 × 25 129 587 53 50 9.2 5.7 3.5 1.7 560 ∇ 16 × 25 129 587 53 50 10.1 6.0 3.6 1.8 680 18 × 25 105 483 43 41 11.1 6.9 4.2 2.1 680 ∇ 18 × 25 105 483 43 41 12.3 7.2 4.4 2.2 720 16 × 30 100 457 42 39 11.4 7.1 4.3 2.1 720 ∇ 16 × 30 100 457 42 39 12.5 7.4 4.5 2.2 820 16 × 35 88 401 36 34 13.2 8.2 5.0 2.5 820 ∇ 16 × 35 88 401 36 34 14.5 8.6 5.2 2.6 900 18 × 30 80 365 33 31 13.9 8.6 5.2 2.6 900 ∇ 18 × 30 80 365 33 31 15.2 9.0 5.4 2.7 1000 16 × 39 73 329 30 29 15.1 9.4 5.7 2.8 1000 ∇ 16 × 39 73 329 30 29 16.6 9.8 5.9 3.0 1200 20 × 29 61 274 26 24 14.9 9.3 5.6 2.8 1200 ∇ 20 × 29 61 274 26 24 16.5 9.7 5.9 2.9 1400 18 × 39 52 235 22 20 18.9 11.8 7.1 3.6 1400 ∇ 18 × 39 52 235 22 20 20.8 12.2 7.4 3.7 2000 21 × 39 38 165 16 16 21.3 13.2 8.0 4.0 2000 ∇ 21 × 39 38 165 16 16 23.4 13.8 8.4 4.2 2700 21 × 49 28 123 12 12 26.8 16.7 10.1 5.0 2700 ∇ 21 × 49 28 123 12 12 29.5 17.4 10.5 5.3 B41689, B41789 Very high ripple current up to 150°C Page 11 of 21Please read Cautions and warnings and Important notes at the end of this document.
3) Maximum ripple current at 125 °C capacitor case temperature TC (measured at aluminum case surface), when mounted to a heat sink. Further details available upon request. Technical data CR 120 Hz 20 °C μF Case dimensions d × l mm ESRmax 100 Hz 20 °C mΩ ESRmax 100 Hz 40 °C mΩ ESRmax 10 kHz 20 °C mΩ Zmax 100 kHz 20 °C mΩ IAC,max3) 10 kHz TC 125 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 150 °C A ∇ Increased ripple current due to optimized thermal design VR =6 3VD C 360 16 × 25 173 652 58 55 8.9 5.1 3.2 1.6 360 ∇ 16 × 25 173 652 58 55 9.2 5.3 3.3 1.6 470 18 × 25 132 499 43 41 11.1 6.3 4.0 2.0 470 ∇ 18 × 25 132 499 43 41 11.4 6.6 4.1 2.1 510 16 × 30 124 461 42 40 11.2 6.4 4.0 2.0 510 ∇ 16 × 30 124 461 42 40 11.6 6.7 4.2 2.1 620 16 × 35 102 379 34 33 13.4 7.6 4.8 2.4 620 18 × 30 100 379 33 32 13.8 7.9 4.9 2.5 620 ∇ 16 × 35 102 379 34 33 13.8 7.9 5.0 2.5 620 ∇ 18 × 30 100 379 33 32 14.2 8.2 5.1 2.6 750 16 × 39 84 314 29 27 15.2 8.7 5.5 2.7 750 ∇ 16 × 39 84 314 29 27 15.8 9.0 5.6 2.8 820 18 × 35 76 287 26 24 16.6 9.5 6.0 3.0 820 ∇ 18 × 35 76 287 26 24 17.2 9.9 6.2 3.1 910 18 × 39 69 258 23 22 18.6 10.6 6.7 3.3 910 21 × 30 71 259 25 24 16.1 9.2 5.8 2.9 910 ∇ 18 × 39 69 258 23 22 19.2 11.0 6.9 3.4 910 ∇ 21 × 30 71 259 25 24 16.6 9.5 6.0 3.0 1100 21 × 35 58 215 21 20 19.0 10.8 6.8 3.4 1100 ∇ 21 × 35 58 215 21 20 19.7 11.2 7.0 3.5 1300 21 × 39 50 182 18 17 21.5 12.3 7.7 3.9 1300 ∇ 21 × 39 50 182 18 17 22.3 12.7 8.0 4.0 1800 21 × 49 36 132 13 13 27.3 15.6 9.8 4.9 1800 ∇ 21 × 49 36 132 13 13 28.2 16.0 10.0 5.0 B41689, B41789 Very high ripple current up to 150°C Page 12 of 21Please read Cautions and warnings and Important notes at the end of this document.
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Useful life1) depending on ambient temperature TA under ripple current operating conditions at VR Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior B41689, B41789 Very high ripple current up to 150°C Page 13 of 21Please read Cautions and warnings and Important notes at the end of this document.
Equivalent series resistance ESR versus frequency f Typical behavior for 820 μF/63 V Impedance Z versus frequency f Typical behavior for 820 μF/63 V B41689, B41789 Very high ripple current up to 150°C Page 14 of 21Please read Cautions and warnings and Important notes at the end of this document.
The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. B41689, B41789 Very high ripple current up to 150°C Page 15 of 21Please read Cautions and warnings and Important notes at the end of this document.
The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Reference chapter "General technical information" Polarity Make sure that polar capacitors are connected with the right polarity. "Basic construction of aluminum electrolytic capacitors" Reverse voltage Voltages of opposite polarity should be prevented by connecting a diode. 3.1.6 "Reverse voltage" Mounting position of screw- terminal capacitors Screw terminal capacitors must not be mounted with terminals facing down unless otherwise specified. 11.1. "Mounting positions of capacitors with screw terminals" Robustness of terminals The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2.5 Nm M6: 4.0 Nm 11.3 "Mounting torques" Mounting of single-ended capacitors The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. 11.4 "Mounting considerations for single-ended capacitors" Soldering Do not exceed the specified time or temperature limits during soldering. 11.5 "Soldering" Soldering, cleaning agents Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. 11.6 "Cleaning agents" Upper category temperature Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Passive flammability Avoid external energy, e.g. fire. 8.1 "Passive flammability" B41689, B41789 Very high ripple current up to 150°C Page 16 of 21Please read Cautions and warnings and Important notes at the end of this document.
Topic Safety information Reference chapter "General technical information" Active flammability Avoid overload of the capacitors. 8.2 "Active flammability" Maintenance Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. "Maintenance" Storage Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35°C and a relative humidity of≤ 75%. 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" Breakdown strength of insulating sleeves Do not damage the insulating sleeve, especially when ring clips are used for mounting. "Screw terminals accessories" Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the order- ing codes are due to different processes employed and do not affect the specifications of the re- spective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. B41689, B41789 Very high ripple current up to 150°C Page 17 of 21Please read Cautions and warnings and Important notes at the end of this document.
C Capacitance Kapazität CR Rated capacitance Nennkapazität CS Series capacitance Serienkapazität CS,T Series capacitance at temperature T Serienkapazität bei Temperatur T Cf Capacitance at frequency f Kapazität bei Frequenz f d Case diameter, nominal dimension Gehäusedurchmesser, Nennmaß dmax Maximum case diameter Maximaler Gehäusedurchmesser ESL Self-inductance Eigeninduktivität ESR Equivalent series resistance Ersatzserienwiderstand ESRf Equivalent series resistance at frequency f Ersatzserienwiderstand bei Frequenz f ESRT Equivalent series resistance at temperature T Ersatzserienwiderstand bei Temperatur T f Frequency Frequenz I Current Strom IAC Alternating current (ripple current) Wechselstrom IAC,RMS Root-mean-square value of alternating current Wechselstrom, Effektivwert IAC,f Ripple current at frequency f Wechselstrom bei Frequenz f IAC,max Maximum permissible ripple current Maximal zulässiger Wechselstrom IAC,R Rated ripple current Nennwechselstrom Ileak Leakage current Reststrom Ileak,op Operating leakage current Betriebsreststrom l Case length, nominal dimension Gehäuselänge, Nennmaß lmax Maximum case length (without terminals and mounting stud) Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) R Resistance Widerstand Rins Insulation resistance Isolationswiderstand Rsymm Balancing resistance Symmetrierwiderstand T Temperature Temperatur ΔT Temperature difference Temperaturdifferenz TA Ambient temperature Umgebungstemperatur TC Case temperature Gehäusetemperatur TB Capacitor base temperature Temperatur des Gehäusebodens t Time Zeit Δt Period Zeitraum tb Service life (operating hours) Brauchbarkeitsdauer (Betriebszeit) B41689, B41789 Very high ripple current up to 150°C Page 18 of 21Please read Cautions and warnings and Important notes at the end of this document.
VF Forming voltage Formierspannung Vop Operating voltage Betriebsspannung VR Rated voltage, DC voltage Nennspannung, Gleichspannung VS Surge voltage Spitzenspannung XC Capacitive reactance Kapazitiver Blindwiderstand XL Inductive reactance Induktiver Blindwiderstand Z Impedance Scheinwiderstand ZT Impedance at temperature T Scheinwiderstand bei Temperatur T tan δ Dissipation factor Verlustfaktor λ Failure rate Ausfallrate ε0 Absolute permittivity Elektrische Feldkonstante εr Relative permittivity Dielektrizitätszahl ω Angular velocity; 2 π f Kreisfrequenz; 2 π f Note All dimensions are given in mm. B41689, B41789 Very high ripple current up to 150°C Page 19 of 21Please read Cautions and warnings and Important notes at the end of this document.
The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Ma- terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de- tailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "General Terms of Delivery for Products and Services in the Electrical In- dustry" published by the German Electrical and Electronics Industry Association (ZVEI). Important notes Page 20 of 21
- The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pendingin Europe and in other coun- tries. Further information will be found on the Internet at www.epcos.com/trademarks. Important notes Page 21 of 21