B3J OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Mechanical Key Switch (Hinged) B3J Hinged Design Developed through Human Engineering Quick, superior snap action through hook-type hinge construction. Available with 1 or 2 LEDs or without LEDs. Available in 8 hinge button colors for a total of 56 button color/LED variations. Used in audio equipments, office equipments, transmitters, measuring instruments, TVs, and VCRs.

Ordering Information

Color of No LED One LED Two LEDs hinged button Red Yellow Green Red/Yellow Red/Green Yellow/Green Light gray B3J-1000 B3J-2000 B3J-3000 B3J-4000 B3J-5000 B3J-6000 B3J-7000 Black B3J-1100 B3J-2100 B3J-3100 B3J-4100 B3J-5100 B3J-6100 B3J-7100 Orange B3J-1200 B3J-2200 B3J-3200 B3J-4200 B3J-5200 B3J-6200 B3J-7200 Yellow B3J-1300 B3J-2300 B3J-3300 B3J-4300 B3J-5300 B3J-6300 B3J-7300 Blue B3J-1400 B3J-2400 B3J-3400 B3J-4400 B3J-5400 B3J-6400 B3J-7400 Green B3J-1500 B3J-2500 B3J-3500 B3J-4500 B3J-5500 B3J-6500 B3J-7500 White B3J-1600 B3J-2600 B3J-3600 B3J-4600 B3J-5600 B3J-6600 B3J-7600 Light green B3J-1700 B3J-2700 B3J-3700 B3J-4700 B3J-5700 B3J-6700 B3J-7700 Structure Hinged button LED indicator LED holder B3F-4050

Switching capacity 5 to 24 VDC, 1 to 50 mA (resistive load) Insulation voltage 30 VDC Characteristics Contact configuration SPST-NO Contact resistance 100 mΩ max. (at 5 VDC, 1 mA) Insulation resistance 100 MΩ min. (at 250 VDC) Dielectric strength 500 VAC, 50/60 Hz for 1 min Bounce time 5 ms max. Vibration Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock Destruction: 1,000 m/s2 min. (approx. 100G min.) Malfunction: 100 m/s2 min. (approx. 10G min.) Life expectancy 3,000,000 operations min. Ambient temperature –25°C to 70°C (with no icing) Ambient humidity 35% to 85% Weight Approx. 1.5 to 1.7 g Operating Characteristics Item B3S-1000 Operating force (OF) 1.27±0.49 N (130±50 gf) Reset force (RF min.) 0.29 N (30 gf min.) Pretravel (PT) 0.3+0.2/–0.1 mm Engineering Data Operating Force vs. Stroke (Typical) Operation force (gf) Stroke S (mm) Built-in LED Performance Item Red Yellow Green Forward voltage VF Standard value (V) 2.0 2.0 2.1 Forward current IF Standard value (mA) 20 20 20 Permissible loss P Absolute maximum value (mW) 84 84 84 Reverse voltage VR Absolute maximum value (V) 5 5 5 Note: Since the built-in LED doesn’t contain any limiting resistors, externally connect limiting resistors within the limits shown in the above table.

Note: All units are in millimeters unless otherwise indicated. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Types with no LED B3J-100 PCB Mounting (Top View) Panel Cutout Terminal Arrangement /Internal Connections (Top View)

1 LED Types

B3J-200, -300, -400 PCB Mounting (Top View)

2 LED Types

B3J-500, -600, -700 PCB Mounting (Top View) 18±0.2 12±0.2 9±0.1 3.5 13.8±0.5 9±0.2 10.3±0.2 3.5 *Fit the projection of the Switch into this hole to secure the Switch. 12.5±0.1 5±0.1 9±0.1 Four 1.2±0.05 dia. 13.6±0.2 6.8 19.6±0.2 18±0.2 12±0.2 9±0.1 3.5 13.8±0.5 9±0.2 10.3±0.2 3.5 2.54±0.1 9±0.1 12.50.1 5±0.1 9±0.1 Six 1.2±0.05 13.6±0.2 6.8 19.6±0.2 18±0.2 12±0.2 9±0.1 3.5 13.8±0.5 3.5 9±0.2 10.3±0.2 13.6±0.2 6.8 19.6±0.2 2.54±0.1 9±0.1 3.46±0.1 2.54±0.1 12.5±0.1 5±0.1 9±0.1 Eight 1.2±0.05 dia. Two 1.8±0.05 dia.* Two 1.8±0.05 dia.* Panel Cutout Terminal Arrangement /Internal Connections (Top View) Two 1.8±0.05 dia.* Panel Cutout Terminal Arrangement /Internal Connections (Top View) *Fit the projection of the Switch into this hole to secure the Switch. *Fit the projection of the Switch into this hole to secure the Switch.

  • Do not apply additional force to the plunger once it has stopped moving.
  • Solder at 260°±5°C within five seconds and within two tries.
  • The Switches are not sealed and must be protected with a resin sheet as shown below when used in dust-prone environments.
  • Do not wash the Switches. The Switches may be damaged by solvents if either wiped off using solvents of immersed in solvents.
  • Do not allow flux or flux foam to penetrate onto the component side of the PCB.
  • Use a single-sided PCB with a thickness of 1.6 mm. The Switches may be damaged due to instability or heat from soldering if other PCBs (other thickness or through holes) are used. If is it necessary to use another PCB, test the compatibility and processing in advance. Indicators
  • Connect a limiting resistor to the indicator. Since the Switch dos not contain any limiting resistor, obtain a limiting resistance according to the following formula depending on the voltage to be used so as to satisfy indicator characteristics. Limiting resistance [R] Voltage used [V] - Indicator forward voltage [VF] Indicator forward current [IF] = (Ω ) Forward current IF (mA) Ambient temperature Ta (°C) Forward voltage VF (V) Forward current IF (mA) Red Yellow Green