B39881B8553P810

B8553 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

 EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW Duplexer Cellular / WCDMA Band V Series/type: Ordering code: B8553 B39881B8553P810 Date: Version: April 15, 2011 1.0

2 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data

Revision History

Changes compared to previously issued iteration Issue Originator Detailed specification changes Date LJ17D 1.0 D. Penunuri Initial release March 10, 2011 B8553 1.0 D. Penunuri Change to B-code, change Tx band isolation specification to 60 dB April 15, 2011

3 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. Application ■ Multimode SAW duplexer for mobile telephone Cellular\\WCDMA Band V, Band VI (830-840 MHz) and Band IXX (830-845 MHz) systems ■ Low insertion attenuation ■ Low amplitude ripple ■ High Tx band isolation ■ Single ended to balanced transformation in Antenna - Rx path ■ Impedance transformation 50Ω to 100Ω in Antenna - Rx path

Features

■ Component size 2.0 x 1.6 mm2 ■ Component height 0.47 mm max. ■ RoHS compatible ■ Package forSurfaceM ountTechnology (SMT ) ■ Ni, gold-plated terminals ■ ElectrostaticSensitiveD evice (ESD ) ■ M oistureSensitivityLevel (MSL ) 3 bottom view side view top view 0.350.29 0.43 0.33 0.29 2.0 1.6 0.47 max. 0.7 321 321 Pin configuration ■ 3 TX Input ■ 1, 8 RX Output (balanced) ■ 6 Antenna ■ 2, 4, 5, 7, 9 To be grounded 4,5,9 2,7

4 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data Characteristics Temperature range for specification:T = –30 ˚C to +85 ˚C Antenna terminating impedance: ZANT = 50Ω ll 14 nH RX terminating impedance: ZRX = 100Ω (balanced) TX terminating impedance: ZTX = 50Ω Characteristics TX - ANT min. typ. @ 25 ˚C max. Center frequency fC 836.5 MHz Maximum insertion attenuation α max 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (9). 1.5 2.0 2) 2) Temperature range for this parameter is -20oC to +85oC. dB Amplitude ripple Δα Error Vector Magnitude 3) Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. 2.0 3.0 2) % Input VSWR (TX port) Output VSWR (ANT port)

5 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification:T = –30 ˚C to +85 ˚C Antenna terminating impedance: ZANT = 50Ω ll 14 nH RX terminating impedance: ZRX = 100Ω (balanced) TX terminating impedance: ZTX = 50Ω Characteristics TX - ANT min. typ. @ 25 ˚C max. Absolute attenuation α

6 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data Characteristics Temperature range for specification:T = –30 ˚C to +85 ˚C Antenna terminating impedance: ZANT = 50Ω ll 14 nH RX terminating impedance: ZRX = 100Ω (balanced) TX terminating impedance: ZTX = 50Ω Characteristics ANT - RX min. typ. @ 25 ˚C max. Center frequency fC 881.5 MHz Maximum insertion attenuation α max 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (9). 1.9 2.2 2) 2) Temperature range for this parameter is -20oC to +85oC. dB Amplitude ripple (p-p) Δα Input VSWR (ANT port) Output VSWR (RX port) Common mode rejection ratio 3) A combination of 10o phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR 373) dB

7 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification:T = –30 ˚C to +85 ˚C Antenna terminating impedance: ZANT = 50Ω ll 14 nH RX terminating impedance: ZRX = 100Ω (balanced) TX terminating impedance: ZTX = 50Ω Characteristics ANT - RX min. typ. @ 25 ˚C max. IMD product level limits1) atfTX = 836.5 MHzfRX = 881.5 MHz 1) Power levels: 21.5 dBm Tx signal, -15dBm blocker at antenna port. Blocker 1 45.0 MHz -137 -106 dBm Blocker 2 791.5 MHz -114 -109 dBm Blocker 3 1718.0 MHz -92 -88 dBm Blocker 4 2554.5 MHz -120 -109 dBm Attenuation α

8 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data Characteristics Temperature range for specification:T = –30 ˚C to +85 ˚C Antenna terminating impedance: ZANT = 50Ω ll 14 nH RX terminating impedance: ZRX = 100Ω (balanced) TX terminating impedance: ZTX = 50Ω Characteristics TX - RX min. typ. @ 25 ˚C max. Isolation 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (9). 602) 2) Temperature range for this parameter is -20oC to +85oC. 68 dB Common Mode Isolation

9 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. Maximum ratings Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”,α WCDMA ) is determined by fCarrieraccording to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrierranges from 826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). HRRC (f) is the transfer func- tion of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5 V ESD voltage VESD 1001) 1) acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. V machine model, 10 pulses Input power at PIN source and load impedance 50Ω elsewhere dBm dBm continuous wave T = 55˚C, 1000 h S s d21 f( )H RRC f f Carrier–( ) 2 f d H RRC f( ) 2 f 1=d

10 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data Frequency Response TX-ANT (Passband) Frequency Response TX-ANT (Wideband)

11 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. Frequency Response RX-ANT (Passband) Frequency Response RX-ANT (Wideband)

12 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data Frequency Response TX-RX (Passband Differential Mode Isolation) Frequency Response TX-RX (Wideband Differential Mode Isolation)

13 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. Frequency Response TX-RX (Passband Common Mode Isolation) Frequency Response TX-RX (Wideband Common Mode Isolation)

14 April 15, 2011

836.50 / 881.50 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Preliminary Data Matching (TX, RX, ANT)

15 April 15, 2011

836.50 / 881.50 MHz SAW Components SAW Duplexer Preliminary Data Please readcautions and warnings and important notes at the end of this document. References Type B8553 Ordering code B39881B8553P810 Marking and package F61074-V8247-Z000 Packaging C61157-A8-A38 Date codes L_1126 S-parameters B8553_UN_NB.s4p, B8553_UN_WB.s4p; see file header for pin/port assignments; Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See Inductor pdf-catalog http://www .tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

16 April 15, 2011

The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point outthat such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out thatin individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements,some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Conse- quently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts,all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP , CSSP , CTVS, DeltaCap, DigiSiMic, DSSP , FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap aretrademarks registered or pendingin Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.