B39881B7925P810 TDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
SAW Duplexer for femtocell Band 5 (3G/LTE) Series/type: Ordering code: B7925 B39881B7925P810 Date: Version: April 12, 2013 2.1 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.
2 April 12, 2013
836.5 / 881.5 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer DataSheet Application ■ Low-loss SAW duplexer for WCDMA femtocell sys- tems ■ Low insertion attenuation ■ Usable passband 25 MHz ■ High power durability
Features
■ Package size 2.5 * 2.0 * 0.68 mm3 ■ RoHS compatible ■ Package forSurfaceM ountTechnology (SMT ) ■ Ni, Au-plated terminals ■ ElectrostaticSensitiveD evice (ESD ) ■ M oistureSensitivityLevel 3 ■ Rx =UPLINK = 824-849 MHz ■ Tx = DOWNLINK = 869-894 MHz bottom view side view top view 2.5 2.0 0.3 0.4 3 21 6 754 0.55 0.4 0.4 0.68 0.9 123 567 Pin configuration ■ 3 Rx output ■ 1 Tx input ■ 6 Antenna ■ 2, 4, 5, 7, 8, 9 To be grounded 6 2 5,7,81,3 2,7,8 4,5,9
3 April 12, 2013
836.5 / 881.5 MHz SAW Components SAW Duplexer DataSheet Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification: T = –30 ˚C to +85 ˚C TX terminating impedance: Z Tx =5 0 Ω ANT terminating impedance: Z Ant =5 0 Ω || 8.7 nH RX teminating impedance: Z Rx =5 0 Ω Characteristics ANT-Rx min. typ. @ 25 ˚C max. Center frequency fc - 836.5 - MHz Maximum insertion attenuation α Amplitude ripple (p-p) Δα Input VSWR (Rx port) Output VSWR (Ant Port) Attenuation α
4 April 12, 2013
836.5 / 881.5 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer DataSheet Characteristics Temperature range for specification: T = –30 ˚C to +85 ˚C TX terminating impedance: Z Tx =5 0 Ω ANT terminating impedance: Z Ant =5 0 Ω || 8.7 nH RX teminating impedance: Z Rx =5 0 Ω Characteristics Tx-ANT min. typ. @ 25 ˚C max. Center frequency fc - 881.5 - MHz Maximum insertion attenuation α Amplitude ripple (p-p) Δα Input VSWR (Tx port) Output VSWR (Ant Port) Attenuation α
5 April 12, 2013
836.5 / 881.5 MHz SAW Components SAW Duplexer DataSheet Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification: T = –30 ˚C to +85 ˚C TX terminating impedance: Z Tx =5 0 Ω ANT terminating impedance: Z Ant =5 0 Ω || 8.7 nH RX teminating impedance: Z Rx =5 0 Ω Maximum Ratings Characteristics Tx-Rx min. typ. @ 25 ˚C max. Attenuation α Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5 V ESD voltage VESD 501) 1) According to JESD22-A115A (machine model), 1 negative and 1 positive pulses. V machine model, 1 pulse Input power at pin 1 source and load impedance 50Ω LTE 5 MHz downlink average power T = 55˚C, 50.000 h elsewhere P in 10 dBm
6 April 12, 2013
836.5 / 881.5 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer DataSheet Frequency Response TX-ANT Frequency Response TX-ANT
7 April 12, 2013
836.5 / 881.5 MHz SAW Components SAW Duplexer DataSheet Please readcautions and warnings and important notes at the end of this document. Frequency Response ANT-RX Frequency Response ANT-RX
8 April 12, 2013
836.5 / 881.5 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer DataSheet Frequency Response TX-RX Frequency Response TX-RX
9 April 12, 2013
836.5 / 881.5 MHz SAW Components SAW Duplexer DataSheet Please readcautions and warnings and important notes at the end of this document. S11 VSWR (TX) S22 VSWR (ANT) S33 VSWR (RX)
10 April 12, 2013
836.5 / 881.5 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer DataSheet References Type B7925 Ordering code B39881B7925P810 Marking and package C61157-A3-A54 Packaging F61074-V8153-Z000 Date codes L_1126 S-parameters B7925_NB.s3p B7925_WB.s3p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Di- rective 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www .tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at w ww.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
11 April 12, 2013
The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point outthat such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out thatin individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements,some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Conse- quently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts,all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP , CSSP , CTVS, DeltaCap, DigiSiMic, DSSP , FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap aretrademarks registered or pendingin Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.