B39202B8004P810

B39202B8004P810 TDK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Series/type: Ordering code: B8004 B39202B8004P810 Date: Version: September 02, 2014 2.0 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

2 September 02, 2014

1880.0 / 1960.0 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components BAW/SAW Duplexer Data sheet Application ■ Low-loss BAW/SAW duplexer for mobile telephone WCDMA Band II systems ■ Low insertion attenuation ■ Low amplitude ripple ■ Usable passband 60 MHz ■ Single ended to balanced transformation in Antenna - Rx path ■ Impedance transformation 50Ω to 100Ω in Antenna - Rx path

Features

■ Package size 2.0 x 1.6 mm2, max. height 0.45 mm ■ RoHS compatible ■ Approx. weight 0.0056g ■ Package forSurfaceM ountTechnology (SMT ) ■ Ni, gold-plated terminals ■ Fully matched by integrated matching network ■ ElectrostaticSensitiveD evice (ESD ) ■ M oistureSensitivityLevel 3 bottom view side view top view 2.0 321 321 1.6 8 4 0.45 max 0.35 0.7 0.43 0.33 0.29 0.29 Pin configuration ■ 3 TX Input ■ 1, 8 RX Output (balanced) ■ 6 Antenna ■ 4, 5, 9 To be grounded ■ 2, 7 To be grounded 4,5,9 2,7

3 September 02, 2014

1880.0 / 1960.0 MHz SAW Components BAW/SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C ANT terminating impedance: Z ANT =5 0 Ω RX differential mode terminating impedance: ZRXd = 100Ω and matching (refer to page 6) RX common mode terminating impedance: ZRXc =2 5 Ω TX terminating impedance: Z TX =5 0 Ω Characteristics TX - ANT min. typ. @ 25˚C max. Center frequency fC — 1880.0 — MHz Maximum insertion attenuation 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6). — 2.2 3.0 dB Error Vector Magnitude 2) Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. — 1.1 3.0 % 3) Valid for room temperature 25 ˚C Input VSWR (TX port) Output VSWR (ANT port) Attenuation α

4 September 02, 2014

1880.0 / 1960.0 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components BAW/SAW Duplexer Data sheet Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C ANT terminating impedance: Z ANT =5 0 Ω RX differential mode terminating impedance: ZRXd = 100Ω and matching (refer to page 6) RX common mode terminating impedance: ZRXc =2 5 Ω TX terminating impedance: Z TX =5 0 Ω Characteristics ANT - RX min. typ. @ 25˚C max. Center frequency fC — 1960.0 — MHz Maximum insertion attenuation 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6). — 2.5 3.7 dB 2) Valid for the temperature range from 0 ˚C to 85 ˚C. dB Error Vector Magnitude 3) Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. — 1.6 6.0 % 4) Valid for room temperature 25 ˚C. Input VSWR (ANT port) Output VSWR (RX port) Attenuation α 5) Valid for the temperature range from 25 ˚C to 85 ˚C.

5 September 02, 2014

1880.0 / 1960.0 MHz SAW Components BAW/SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C ANT terminating impedance: Z ANT =5 0 Ω RX differential mode terminating impedance: ZRXd = 100Ω and matching (refer to page 6) RX common mode terminating impedance: ZRXc =2 5 Ω TX terminating impedance: Z TX =5 0 Ω Characteristics ANT - RX min. typ. @ 25 ˚C max. Common Mode Rejection Ratio CMRR 1) A combination of 10˚phase balance and 1dB amplitude balance corresponds to 19.6 dB CMRR 26 — dB IMD Product Level Limits2) at fTX =1880MHz, fRX =1960MHz 2) IMD product level limits for power levels PTX =21.5dBm (antenna port output power) and PBlocker=-15dBm (antenna port input power) Blocker 1 80.0 MHz — –94 — dBm Blocker 2 1800.0 MHz — –115 — dBm Blocker 3 3840.0 MHz — –110 — dBm Characteristics TX - RX min. typ. @ 25 ˚C max. Isolation α 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6). 50 57 — dB 1) 2) 2) Valid for the temperature range from -20 ˚C to +25 ˚C. 53 57 — dB

6 September 02, 2014

1880.0 / 1960.0 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components BAW/SAW Duplexer Data sheet Matching network (element values depend on PCB layout) Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”,α WCDMA ) is determined by fCarrieraccording to 3GPP TS 25.101 (e.g. for WCDMA Band 2 Passband, fCarrierranges from 1852.4 MHz (lowest Tx channel) to 1907.6 MHz (highest Tx channel)). HRRC (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: Maximum ratings Operable temperature range1) 1) Defines the temperature range in which the BAW / SAW device keeps its typical characteristics, however the specification values are not valid for the extended range. T –30/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5.0 V ESD voltage VESD 502) 2) acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses. V machine model, 10 pulses Input power at PIN source and load impedance 50Ω elsewhere dBm dBm continuous wave T = 55˚C, 50.000 h Ls1 = 3.2 nH Ls2 = 3.2 nH ANT TX RX RX 2,7,4,5,9 Ls1 Ls2 S sd2 1 f() H RRC ff Carrier–() 2 fd H RRC f() 2 f1=d

7 September 02, 2014

1880.0 / 1960.0 MHz SAW Components BAW/SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Frequency Response TX-ANT (PTF) Frequency Response TX-ANT (wideband)

8 September 02, 2014

1880.0 / 1960.0 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components BAW/SAW Duplexer Data sheet Frequency Response ANT-RX (PTF), also spec lines for CW plotted Frequency Response ANT-RX (wideband)

9 September 02, 2014

1880.0 / 1960.0 MHz SAW Components BAW/SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Frequency Response TX-ANT Passband (PTF) Frequency Response ANT-RX Passband (PTF)

10 September 02, 2014

1880.0 / 1960.0 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components BAW/SAW Duplexer Data sheet Frequency Response TX-RX (PTF)

11 September 02, 2014

1880.0 / 1960.0 MHz SAW Components BAW/SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. VSWR TX-port VSWR RX-port (differential mode) VSWR ANT-port

12 September 02, 2014

1880.0 / 1960.0 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components BAW/SAW Duplexer Data sheet Type B8004 Ordering code B39202B8004P810 Marking and package C61157-A8-A81 Packaging F61074-V8247-Z000 Date codes L_1126 S-parameters B8004_NB_UN.s4p (unmatched, nearby) B8004_WB_UN.s4p (unmatched, wideband) see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Di- rective 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www .tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at w ww.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

13 September 02, 2014

The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point outthat such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out thatin individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements,some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Conse- quently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts,all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP , CSSP , CTVS, DeltaCap, DigiSiMic, DSSP , FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point outthat such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out thatin individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements,some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Conse- quently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts,all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP , CSSP , CTVS, DeltaCap, DigiSiMic, DSSP , FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP , ThermoFuse, WindCap aretrademarks registered or pendingin Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.