B39152B7920P810

B7920 EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

 EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW Duplexer WCDMA / LTE Band XI Series/type: Ordering code: B7920 B39152B7920P810 Date: Version: January 7, 2011 2.0

2 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet

Revision History

Changes compared to previously issued iteration Issue Originator Detailed specification changes Date 2.0 K.Morozumi Initial release January 7, 2011

3 January 7, 2011

1437.90 / 1485.90 MHz SAW Components SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Application ■ Low-loss SAW duplexer for mobile telephone WCDMA/LTE Band XI systems ■ Low insertion attenuation ■ Low amplitude ripple ■ Usable passband 20MHz(Lower and Middle band) ■ Single ended to balanced transformation in Antenna-Rx path ■ Impedence transformation 50ohm to 100ohm in Antenna - Rx path

Features

■ Package size 2.5 x 2.0mm2 ■ Package height 0.74 mm max. ■ RoHS compatible ■ Approx. weight 0.013g ■ Package forSurfaceM ountTechnology (SMT ) ■ Ni, gold-plated terminals ■ ElectrostaticSensitiveD evice (ESD ) ■ M oisutureSensitivityLevel (MSL ) 3 bottom view side view top view 2.0 0.68 2.5 0.55 0.4 0.9 0.3 0.4 0.4 Pin configuration ■ 1, 8 RX Output (balanced) ■ 3 TX Input ■ 6 Antenna ■ 2, 4, 5, 7, 9 To be grounded 4,5,9 2,7

4 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C Antenna terminating impedance: Z ANT =5 0 Ω ||5.6 nH RX terminating impedance: Z RX = 100 Ω TX terminating impedance: Z TX =5 0 Ω Characterisitcs TX - ANT min. typ. @ 25 ˚C max. Center frequency fC 1437.9 MHz Maximum insertion attenuation Amplitude ripple(p-p) Input VSWR (TX port) Output VSWR (ANT port)

5 January 7, 2011

1437.90 / 1485.90 MHz SAW Components SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C Antenna terminating impedance: Z ANT =5 0 Ω ||5.6 nH RX terminating impedance: Z RX = 100 Ω TX terminating impedance: Z TX =5 0 Ω Characterisitcs TX - ANT min. typ. @ 25 ˚C max. Attenuation α 10 ... 1350 MHz 30 35 dB 1350 ... 1390 MHz 25 29 dB 1390 ... 1409 MHz 5 dB 1565 ... 1585 MHz 40 46 dB 1574 ... 1577 MHz 42 47 dB 1597 ... 1607 MHz 42 46 dB 1607 ... 1680 MHz 25 46 dB 2010 ... 2025 MHz 30 41 dB 2110 ... 2170 MHz 30 37 dB 2400 ... 2483.5 MHz 30 33 dB 5150 ... 5850 MHz 11 17 dB

6 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C Antenna terminating impedance: Z ANT =5 0 Ω ||5.6 nH RX terminating impedance: Z RX = 100 Ω TX terminating impedance: Z TX =5 0 Ω Characterisitcs ANT - RX min. typ. @ 25 ˚C max. Center frequency fC 1485.9 MHz Maximum insertion attenuation Amplitude ripple (p-p) Input VSWR (ANT port) Output VSWR (RX port) Common Mode Rejection Ratio CMRR 1) A combination of 10o phase balance and 1dB amplitude balance corresponds to 19.6 dB CMRR. 27 dB

7 January 7, 2011

1437.90 / 1485.90 MHz SAW Components SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C Antenna terminating impedance: Z ANT =5 0 Ω ||5.6 nH RX terminating impedance: Z RX = 100 Ω TX terminating impedance: Z TX =5 0 Ω Characterisitcs ANT - RX min. typ. @ 25 ˚C max. Attenuation α 1 ... 1381 MHz 30 64 dB 1381 ... 1429 MHz 40 55 dB 1453 ... 1462 MHz 5 23 dB 1516 ... 1560 MHz 3 dB 1560 ... 6000 MHz 30 43 dB IMD Product Level Limits1) 1) IMD product level limits for power levels Pf1=21.5dB (antenna port output power) and Pf2=- 15dBm (antenna port input power). at f1=1437.9 MHz f2 = 48 MHz -130 -106 dBm f2 = 2*f1 + 48MHz -122 -106 dBm f2 = f1 - 48MHz -111 -106 dBm f2 = 3*f1 + 48MHz -130 -106 dBm

8 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet Characteristics Temperature range for specification: T = –20 ˚C to +85 ˚C Antenna terminating impedance: Z ANT =5 0 Ω ||5.6 nH RX terminating impedance: Z RX = 100 Ω TX terminating impedance: Z TX =5 0 Ω Characterisitcs TX - RX min. typ. @ 25 ˚C max. Differential Mode Isolation α 1574 ... 1577 MHz 30 75 dB Common mode Isolation

9 January 7, 2011

1437.90 / 1485.90 MHz SAW Components SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Maximum ratings Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 5 V ESD voltage VESD 501) 1) acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. V machine model, 10 pulses Input power at PIN source and load impedance 50Ω 1427.9 - 1447.9 MHz elsewhere dBm dBm continuous wave T = 50˚C, 5,000 h}

10 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet Frequency Response Tx-ANT (passband) Frequency Response Tx-ANT (wideband)

11 January 7, 2011

1437.90 / 1485.90 MHz SAW Components SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Frequency Response ANT-Rx (passband) Frequency Response ANT-Rx (wideband)

12 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet Frequency Response Tx-Rx (passband) / Differential Frequency Response Tx-Rx (wideband) / Differential

13 January 7, 2011

1437.90 / 1485.90 MHz SAW Components SAW Duplexer Data sheet Please readcautions and warnings and important notes at the end of this document. Frequency Response Tx-Rx (passband) / Common-mode Frequency Response Tx-Rx (wideband) / common-mode

14 January 7, 2011

1437.90 / 1485.90 MHz Please readcautions and warnings and important notes at the end of this document. SAW Components SAW Duplexer Data sheet References Type B7920 Ordering code B39152B7920P810 Marking and package C61157-Z3-C47 Packaging F61074-V8153-Z000 Date codes L_1126 S-parameters B7920_NB.s4p, B7920_WB.s4p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coilss See Inductor pdf-catalog http://www .tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at w ww.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2010. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

15 January 7, 2011

The following applies to all products named in this publication: 1. Some parts of this publication containstatements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point outthat such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out thatin individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements,some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently,the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Conse- quently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts,all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP , CSSP , CTVS, DeltaCap, DigiSiMic, DSSP , FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap aretrademarks registered or pendingin Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.