B-414 BRADY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

B-414 THERMAL TRANSFER PRINTABLE WHITE BRADYGRIP™ LABEL STOCK TDS No. B-414 Effective Date: 7/23/2020 Description: GENERAL Print Technology: Thermal Transfer Materials Type: White Polyester THT Printable Surface; Polypropylene Backing Finish: Glossy Anchoring System: Velcro® Brand hooks

APPLICATIONS

B-414 is designed to adhere to the loop side of hook-and-loop fasteners. Specific applications include wire and cable management products, such as Velcro® Brand One-Wrap®. RECOMMENDED RIBBONS Brady Series R6000 Halogen Free REGULATORY For information on the Weee-RoHS compliance status for a Brady Product go to one of the following websites: In Canada: www.bradycanada.ca/weee-rohs In Europe: www.bradyeurope.com/rohs In Japan: www. brady.co.jp/products/labelsuse/rohs All other regions: www.bradyid.com/weee-rohs Details: PHYSICAL PROPERTIES TEST METHOD AVERAGE RESULTS Thickness ASTM D 1000 Total 0.015 inch (0.381 mm) Shear Adhesion to: -Velcro One-Wrap ASTM D 5169 69 lbf/in (47 N/cm Peel Adhesion to: -Velcro One-Wrap ASTM D 5170 0.75” width 0.25” width 7 ozf/in (80 gf/cm) 24 ozf/in (275 gf/cm) Performance properties were tested on samples adhered to the loop side of Velcro Brand One-Wrap ® that was wrapped around a ½” diameter mandrel. PERFORMANCE PROPERTIES TEST METHOD TYPICAL RESULTS Long Term High Service Temperature 30 days at 50°C No visible effect Humidity Resistance 30 days at 100°F (38°C) and 95% relative humidity. No visible effect UV Light Resistance 30 days in Q-Sun™ Not evaluated for outdoor use Weatherability ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer Not evaluated for outdoor use Print Abrasion Resistance 20 eraser double rubs, 2 lb weight Minimal effect

Shelf Life: Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH. It remains the responsibility of the user to assess the risk of using this product. We encourage customers to develop testing protocols that will qualify a product's fitness for use in their actual application. Trademarks: Velcro® and One-Wrap® are registered trademarks of Velcro BVBA BradyGrip™ is a trademark of Brady Corporation All S.I. Units (metric) are mathematically derived from the U.S. Conventional Units Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. Copyright 2020 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission. Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289