B32520C104K

B32529C104K EPCOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 31

Technical content

Metallized Polyester Film Capacitors (MKT) Series/Type: B32520 ... B32529 Date: August 2004 © EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Associ- ation), unless otherwise agreed.

Coupling, decoupling Bypassing RFI for automotive Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/125/56 Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology for lead spacing 5 to 15 mm = code D or C in digit 7 of ordering code Wound capacitor technology for lead spacing 10 to 27.5 mm = code N, Q or T in digit 7 of ordering code Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0)

Features

Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated DC voltage, date of manufacture (coded), coded type ("1") for lead spacing 5 mm, series and lot number for lead spacing ≥10 mm Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Dimensional drawing Dimensions in mm 1) 0.5 mm for capacitor width w = 4 mm Lead spacing ±0.4 Lead diameter Type 5.0 0.5 B32529 7.5 0.5 B32520 10.0 0.61) B32521 15.0 0.8 B32522 22.5 0.8 B32523 27.5 0.8 B32524 Metallized polyester film capacitors (MKT) B32520 ... B32529 General purpose (stacked/wound)

Overview of available types Lead spacing 5.0 mm 7.5 mm 10.0 mm Type B32529 B32520 B32521 Page 5 9 11 Technology s s s s s s s s s s s s s s w VR (VDC) 50 63 100 250 400 630 63 100 250 400 63 100 250 400 630 Vrms (VAC) 32 40 63 160 200 400 40 63 160 200 40 63 160 200 200 CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 Technology: s = Stacked-film technology / w = Wound capacitor technology B32520 ... B32529 General purpose (stacked/wound)

Overview of available types Lead spacing 15.0 mm 22.5 mm 27.5 mm Type B32522 B32523 B32524 Page 13 15 16 Technology s s/w s/w s w w w w w w w w w w w w VR (VDC) 63 100 250 400 450 630 63 100 250 400 630 63 100 250 400 630 Vrms (VAC) 40 63 160 200 200 200 40 63 160 200 200 40 63 160 200 220 CR (µF) 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 Technology: s = Stacked-film technology / w = Wound capacitor technology B32520 ... B32529 General purpose (stacked/wound)

Ordering codes and packing units (lead spacing 5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 50 32 0.33 3.0 × 6.5 × 7.2 B32529C5334+* 2700 2400 2000 0.47 3.5 × 8.0 × 7.2 B32529C5474+* 2300 2000 2000 0.68 4.5 × 9.5 × 7.3 B32529C5684+* 1800 1500 1500 1.0 4.5 × 9.5 × 7.3 B32529C5105+* 1800 1500 1500 1.5 6.0 × 10.5 × 7.5 B32529C5155+* 1300 1100 1000 2.2 7.8 × 13.0 × 7.8 B32529D5225+* 1000 800 1000 3.3 7.8 × 13.0 × 7.8 B32529D5335+* 1000 800 1000 63 40 0.0010 2.5 × 6.5 × 7.2 B32529C0102+* 3200 2800 2000 0.0015 2.5 × 6.5 × 7.2 B32529C0152+* 3200 2800 2000 0.0022 2.5 × 6.5 × 7.2 B32529C0222+* 3200 2800 2000 0.0033 2.5 × 6.5 × 7.2 B32529C0332+* 3200 2800 2000 0.0047 2.5 × 6.5 × 7.2 B32529C0472+* 3200 2800 2000 0.0068 2.5 × 6.5 × 7.2 B32529C0682+* 3200 2800 2000 0.010 2.5 × 6.5 × 7.2 B32529C0103+* 3200 2800 2000 0.015 2.5 × 6.5 × 7.2 B32529C0153+* 3200 2800 2000 0.022 2.5 × 6.5 × 7.2 B32529C0223+* 3200 2800 2000 0.033 2.5 × 6.5 × 7.2 B32529C0333+* 3200 2800 2000 0.047 2.5 × 6.5 × 7.2 B32529C0473+* 3200 2800 2000 0.068 2.5 × 6.5 × 7.2 B32529C0683+* 3200 2800 2000 0.10 2.5 × 6.5 × 7.2 B32529C0104+* 3200 2800 2000 0.15 2.5 × 6.5 × 7.2 B32529C0154+* 3200 2800 2000 0.22 2.5 × 6.5 × 7.2 B32529C0224+* 3200 2800 2000 0.33 3.0 × 6.5 × 7.2 B32529C0334+* 2700 2400 2000 0.47 3.5 × 8.0 × 7.2 B32529C0474+* 2300 2000 2000 0.68 4.5 × 9.5 × 7.3 B32529C0684+* 1800 1500 1500 1.0 4.5 × 9.5 × 7.3 B32529C0105+* 1800 1500 1500 1.5 6.0 × 10.5 × 7.5 B32529C0155+* 1300 1100 1000 2.2 7.8 × 13.0 × 7.8 B32529D0225+*** 1000 800 1000 B32529 General purpose (stacked)

Ordering codes and packing units (lead spacing 5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 100 63 0.0010 2.5 × 6.5 × 7.2 B32529C1102+* 3200 2800 2000 0.0015 2.5 × 6.5 × 7.2 B32529C1152+* 3200 2800 2000 0.0022 2.5 × 6.5 × 7.2 B32529C1222+* 3200 2800 2000 0.0033 2.5 × 6.5 × 7.2 B32529C1332+* 3200 2800 2000 0.0047 2.5 × 6.5 × 7.2 B32529C1472+* 3200 2800 2000 0.0068 2.5 × 6.5 × 7.2 B32529C1682+* 3200 2800 2000 0.010 2.5 × 6.5 × 7.2 B32529C1103+* 3200 2800 2000 0.015 2.5 × 6.5 × 7.2 B32529C1153+* 3200 2800 2000 0.022 2.5 × 6.5 × 7.2 B32529C1223+* 3200 2800 2000 0.033 2.5 × 6.5 × 7.2 B32529C1333+* 3200 2800 2000 0.047 2.5 × 6.5 × 7.2 B32529C1473+* 3200 2800 2000 0.068 2.5 × 6.5 × 7.2 B32529C1683+* 3200 2800 2000 0.10 2.5 × 6.5 × 7.2 B32529C1104+* 3200 2800 2000 0.15 3.0 × 6.5 × 7.2 B32529C1154+* 2700 2400 2000 0.22 3.5 × 8.0 × 7.2 B32529C1224+* 2300 2000 2000 0.33 3.5 × 8.0 × 7.2 B32529C1334+* 2300 2000 2000 0.47 4.5 × 9.5 × 7.3 B32529C1474+* 1800 1500 1500 0.68 6.0 × 10.5 × 7.5 B32529C1684+* 1300 1100 1000 1.0 7.8 × 13.0 × 7.8 B32529D1105+* 1000 800 1000 B32529 General purpose (stacked)

Ordering codes and packing units (lead spacing 5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 250 160 0.0010 2.5 × 6.5 × 7.2 B32529C3102+* 3200 2800 2000 0.0015 2.5 × 6.5 × 7.2 B32529C3152+* 3200 2800 2000 0.0022 2.5 × 6.5 × 7.2 B32529C3222+* 3200 2800 2000 0.0033 2.5 × 6.5 × 7.2 B32529C3332+* 3200 2800 2000 0.0047 2.5 × 6.5 × 7.2 B32529C3472+* 3200 2800 2000 0.0068 2.5 × 6.5 × 7.2 B32529C3682+* 3200 2800 2000 0.010 2.5 × 6.5 × 7.2 B32529C3103+* 3200 2800 2000 0.015 2.5 × 6.5 × 7.2 B32529C3153+* 3200 2800 2000 0.022 2.5 × 6.5 × 7.2 B32529C3223+* 3200 2800 2000 0.033 3.0 × 6.5 × 7.2 B32529C3333+* 2700 2400 2000 0.047 3.5 × 8.0 × 7.2 B32529C3473+* 2300 2000 2000 0.068 4.5 × 9.5 × 7.3 B32529C3683+* 1800 1500 1500 0.10 4.5 × 9.5 × 7.3 B32529C3104+* 1800 1500 1500 0.15 5.0 × 10.0 × 7.5 B32529C3154+* 1600 1400 1500 0.22 7.8 × 13.0 × 7.8 B32529D3224+* 1000 800 1000 0.33 7.8 × 13.0 × 7.8 B32529C3334+* 1000 800 1000 0.47 7.8 × 13.0 × 7.8 B32529C3474+* 1000 800 1000 400 200 0.0010 2.5 × 6.5 × 7.2 B32529C6102+* 3200 2800 2000 0.0015 2.5 × 6.5 × 7.2 B32529C6152+* 3200 2800 2000 0.0022 2.5 × 6.5 × 7.2 B32529C6222+* 3200 2800 2000 0.0033 2.5 × 6.5 × 7.2 B32529C6332+* 3200 2800 2000 0.0047 2.5 × 6.5 × 7.2 B32529C6472+* 3200 2800 2000 0.0068 2.5 × 6.5 × 7.2 B32529C6682+* 3200 2800 2000 0.010 3.0 × 6.5 × 7.2 B32529C6103+* 2700 2400 2000 0.015 3.5 × 8.0 × 7.2 B32529C6153+* 2300 2000 2000 0.022 4.5 × 9.5 × 7.3 B32529C6223+* 1800 1500 1500 0.033 5.0 × 10.0 × 7.5 B32529C6333+* 1600 1400 1500 0.047 6.0 × 10.5 × 7.5 B32529C6473+* 1300 1100 1000 0.068 7.8 × 13.0 × 7.8 B32529D6683+* 1000 800 1000 0.10 7.8 × 13.0 × 7.8 B32529D6104+*** 1000 800 1000 B32529 General purpose (stacked)

Ordering codes and packing units (lead spacing 5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 630 400 0.0010 2.5 × 6.5 × 7.2 B32529C8102+* 3200 2800 2000 0.0015 2.5 × 6.5 × 7.2 B32529C8152+* 3200 2800 2000 0.0022 2.5 × 6.5 × 7.2 B32529C8222+* 3200 2800 2000 0.0033 3.5 × 8.0 × 7.2 B32529C8332+* 2300 2000 2000 0.0047 3.5 × 8.0 × 7.2 B32529C8472+* 2300 2000 2000 0.0068 3.5 × 8.0 × 7.2 B32529C8682+* 2300 2000 2000 0.010 5.0 × 10.0 × 7.5 B32529C8103+* 1600 1400 1500 B32529 General purpose (stacked)

Ordering codes and packing units (lead spacing 7.5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.068 2.5 × 7.0 × 10.0 B32520C0683+* 3200 2800 2500 0.10 2.5 × 7.0 × 10.0 B32520C0104+* 3200 2800 2500 0.15 2.5 × 7.0 × 10.0 B32520C0154+* 3200 2800 2500 0.22 2.5 × 7.0 × 10.0 B32520C0224+* 3200 2800 2500 0.33 2.5 × 7.0 × 10.0 B32520C0334+* 3200 2800 2500 0.47 3.0 × 8.0 × 10.0 B32520C0474+* 2600 2400 2000 0.68 4.0 × 8.5 × 10.0 B32520C0684+* 2000 1800 1500 1.0 5.0 × 10.5 × 10.0 B32520C0105+* 1600 1400 1000 1.5 5.0 × 10.5 × 10.0 B32520C0155+* 1600 1400 1000 2.2 6.0 × 12.0 × 10.3 B32520C0225+* 1300 1100 750 100 63 0.047 2.5 × 7.0 × 10.0 B32520C1473+* 3200 2800 2500 0.068 2.5 × 7.0 × 10.0 B32520C1683+* 3200 2800 2500 0.10 2.5 × 7.0 × 10.0 B32520C1104+* 3200 2800 2500 0.15 3.0 × 8.0 × 10.0 B32520C1154+* 2600 2400 2000 0.22 3.0 × 8.0 × 10.0 B32520C1224+* 2600 2400 2000 0.33 4.0 × 8.5 × 10.0 B32520C1334+* 2000 1800 1500 0.47 5.0 × 10.5 × 10.0 B32520C1474+* 1600 1400 1000 0.68 6.0 × 12.0 × 10.3 B32520C1684+* 1300 1100 750 1.0 6.0 × 12.0 × 10.3 B32520C1105+* 1300 1100 750 250 160 0.015 2.5 × 7.0 × 10.0 B32520C3153+* 3200 2800 2500 0.022 2.5 × 7.0 × 10.0 B32520C3223+* 3200 2800 2500 0.033 2.5 × 7.0 × 10.0 B32520C3333+* 3200 2800 2500 0.047 2.5 × 7.0 × 10.0 B32520C3473+* 3200 2800 2500 0.068 3.0 × 8.0 × 10.0 B32520C3683+* 2600 2400 2000 0.10 4.0 × 8.5 × 10.0 B32520C3104+* 2000 1800 1500 0.15 5.0 × 10.5 × 10.0 B32520C3154+* 1600 1400 1000 0.22 6.0 × 12.0 × 10.3 B32520C3224+* 1300 1100 750 B32520 General purpose (stacked)

Ordering codes and packing units (lead spacing 7.5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 400 200 0.0010 2.5 × 7.0 × 10.0 B32520C6102+* 3200 2800 2500 0.0015 2.5 × 7.0 × 10.0 B32520C6152+* 3200 2800 2500 0.0022 2.5 × 7.0 × 10.0 B32520C6222+* 3200 2800 2500 0.0033 2.5 × 7.0 × 10.0 B32520C6332+* 3200 2800 2500 0.0047 2.5 × 7.0 × 10.0 B32520C6472+* 3200 2800 2500 0.0068 2.5 × 7.0 × 10.0 B32520C6682+* 3200 2800 2500 0.010 2.5 × 7.0 × 10.0 B32520C6103+* 3200 2800 2500 0.015 3.0 × 8.0 × 10.0 B32520C6153+* 2600 2400 2000 0.022 4.0 × 8.5 × 10.0 B32520C6223+* 2000 1800 1500 0.033 5.0 × 10.5 × 10.0 B32520C6333+* 1600 1400 1000 0.047 5.0 × 10.5 × 10.0 B32520C6473+* 1600 1400 1000 0.068 6.0 × 12.0 × 10.3 B32520C6683+*** 1300 1100 750 B32520 General purpose (stacked)

Ordering codes and packing units (lead spacing 10 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit ∇ Wound capacitor technology Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.47 4.0 × 7.0 × 13.0 B32521C0474+* 1000 1700 1000 0.68 4.0 × 7.0 × 13.0 B32521C0684+* 1000 1700 1000 1.0 4.0 × 9.0 × 13.0 B32521C0105+* 1000 1700 1000 1.5 5.0 × 11.0 × 13.0 B32521C0155+* 830 1300 1000 2.2 5.0 × 11.0 × 13.0 B32521C0225+* 830 1300 1000 3.3 6.0 × 12.0 × 13.0 B32521C0335+* 680 1100 1000 100 63 0.10 4.0 × 7.0 × 13.0 B32521C1104+* 1000 1700 1000 0.15 4.0 × 7.0 × 13.0 B32521C1154+* 1000 1700 1000 0.22 4.0 × 7.0 × 13.0 B32521C1224+* 1000 1700 1000 0.33 4.0 × 7.0 × 13.0 B32521C1334+* 1000 1700 1000 0.47 4.0 × 9.0 × 13.0 B32521C1474+* 1000 1700 1000 0.68 5.0 × 11.0 × 13.0 B32521C1684+* 830 1300 1000 1.0 6.0 × 12.0 × 13.0 B32521C1105+* 680 1100 1000 250 160 0.033 4.0 × 7.0 × 13.0 B32521C3333+* 1000 1700 1000 0.047 4.0 × 7.0 × 13.0 B32521C3473+* 1000 1700 1000 0.068 4.0 × 7.0 × 13.0 B32521C3683+* 1000 1700 1000 0.10 4.0 × 7.0 × 13.0 B32521C3104+* 1000 1700 1000 0.15 4.0 × 9.0 × 13.0 B32521C3154+* 1000 1700 1000 0.22 5.0 × 11.0 × 13.0 B32521C3224+* 830 1300 1000 0.33 5.0 × 11.0 × 13.0 B32521C3334+* 830 1300 1000 0.47 6.0 × 12.0 × 13.0 B32521C3474+* 680 1100 1000 400 200 0.010 4.0 × 7.0 × 13.0 B32521C6103+* 1000 1700 1000 0.015 4.0 × 7.0 × 13.0 B32521C6153+* 1000 1700 1000 0.022 4.0 × 7.0 × 13.0 B32521C6223+* 1000 1700 1000 0.033 4.0 × 9.0 × 13.0 B32521C6333+* 1000 1700 1000 0.047 5.0 × 11.0 × 13.0 B32521C6473+* 830 1300 1000 0.068 5.0 × 11.0 × 13.0 B32521C6683+* 830 1300 1000 0.10 6.0 × 12.0 × 13.0 B32521C6104+*** 680 1100 1000 B32521 General purpose (stacked/wound)

Ordering codes and packing units (lead spacing 10 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit ∇ Wound capacitor technology Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 630 200 0.0068 ∇ 4.0 × 9.0 × 13.0 B32521N8682+* 1000 1700 1000 0.010 ∇ 4.0 × 9.0 × 13.0 B32521N8103+* 1000 1700 1000 0.015 ∇ 5.0 × 11.0 × 13.0 B32521N8153+* 830 1300 1000 0.022 ∇ 5.0 × 11.0 × 13.0 B32521N8223+* 830 1300 1000 0.033 ∇ 6.0 × 12.0 × 13.0 B32521N8333+* 680 1100 1000 B32521 General purpose (stacked/wound)

Ordering codes and packing units (lead spacing 15 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit ∇ Wound capacitor technology Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.68 5.0 × 10.5 × 18.0 B32522C0684+* 1170 1300 1000 1.0 5.0 × 10.5 × 18.0 B32522C0105+* 1170 1300 1000 1.5 5.0 × 10.5 × 18.0 B32522C0155+* 1170 1300 1000 2.2 5.0 × 10.5 × 18.0 B32522C0225+* 1170 1300 1000 3.3 6.0 × 11.0 × 18.0 B32522C0335+* 960 1100 1000 4.7 7.0 × 12.5 × 18.0 B32522C0475+* 830 900 1000 6.8 8.5 × 14.5 × 18.0 B32522C0685+* 680 700 500 10 9.0 × 17.5 × 18.0 B32522C0106+* 640 700 500 100 63 0.33 5.0 × 10.5 × 18.0 B32522C1334+* 1170 1300 1000 0.47 5.0 × 10.5 × 18.0 B32522C1474+* 1170 1300 1000 0.68 5.0 × 10.5 × 18.0 B32522C1684+* 1170 1300 1000 1.0 5.0 × 10.5 × 18.0 B32522C1105+* 1170 1300 1000 1.0 ∇ 6.0 × 11.0 × 18.0 B32522Q1105+* 960 1100 1000 1.5 6.0 × 11.0 × 18.0 B32522C1155+* 960 1100 1000 1.5 ∇ 7.0 × 12.5 × 18.0 B32522Q1155+* 830 900 1000 2.2 7.0 × 12.5 × 18.0 B32522C1225+* 830 900 1000 2.2 ∇ 8.5 × 14.5 × 18.0 B32522Q1225+* 680 700 500 3.3 8.5 × 14.5 × 18.0 B32522C1335+* 680 700 500 3.3 ∇ 9.0 × 17.5 × 18.0 B32522Q1335+* 640 700 500 4.7 9.0 × 17.5 × 18.0 B32522C1475+* 640 700 500 4.7 ∇ 11.0 × 18.5 × 18.0 B32522Q1475+* 550 300 250 160 0.10 5.0 × 10.5 × 18.0 B32522C3104+* 1170 1300 1000 0.15 5.0 × 10.5 × 18.0 B32522C3154+* 1170 1300 1000 0.22 5.0 × 10.5 × 18.0 B32522C3224+* 1170 1300 1000 0.33 5.0 × 10.5 × 18.0 B32522C3334+* 1170 1300 1000 0.47 6.0 × 11.0 × 18.0 B32522C3474+* 960 1100 1000 0.68 7.0 × 12.5 × 18.0 B32522C3684+* 830 900 1000 1.0 8.5 × 14.5 × 18.0 B32522C3105+* 680 700 500 1.0 ∇ 8.5 × 14.5 × 18.0 B32522N3105+* 680 700 500 1.5 9.0 × 17.5 × 18.0 B32522C3155+* 640 700 500 1.5 ∇ 9.0 × 17.5 × 18.0 B32522N3155+* 640 700 500 B32522 General purpose (stacked/wound)

Ordering codes and packing units (lead spacing 15 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit ∇ Wound capacitor technology Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 400 200 0.047 5.0 × 10.5 × 18.0 B32522C6473+* 1170 1300 1000 0.068 5.0 × 10.5 × 18.0 B32522C6683+* 1170 1300 1000 0.10 5.0 × 10.5 × 18.0 B32522C6104+* 1170 1300 1000 0.15 6.0 × 11.0 × 18.0 B32522C6154+* 960 1100 1000 0.22 7.0 × 12.5 × 18.0 B32522C6224+* 830 900 1000 0.33 8.5 × 14.5 × 18.0 B32522C6334+* 680 700 500 450 200 0.10 ∇ 5.0 × 10.5 × 18.0 B32522N6104+* 1170 1300 1000 0.15 ∇ 5.0 × 10.5 × 18.0 B32522N6154+* 1170 1300 1000 0.22 ∇ 6.0 × 11.0 × 18.0 B32522N6224+* 960 1100 1000 0.33 ∇ 7.0 × 12.5 × 18.0 B32522N6334+* 830 900 1000 0.47 ∇ 8.5 × 14.5 × 18.0 B32522N6474+* 680 700 500 0.47 ∇ 8.0 × 14.0 × 18.0 B32522T6474+* 750 500 0.68 ∇ 9.0 × 17.5 × 18.0 B32522N6684+* 640 700 500 0.68 ∇ 13.0 × 14.0 × 18.0 B32522T6684+* 500 300 1.0 ∇ 11.0 × 18.5 × 18.0 B32522N6105+* 550 300 630 200 0.033 ∇ 5.0 × 10.5 × 18.0 B32522Q8333+* 1170 1300 1000 0.047 ∇ 5.0 × 10.5 × 18.0 B32522Q8473+* 1170 1300 1000 0.068 ∇ 6.0 × 11.0 × 18.0 B32522Q8683+* 960 1100 1000 0.10 ∇ 7.0 × 12.5 × 18.0 B32522Q8104+* 830 900 1000 0.15 ∇ 8.5 × 14.5 × 18.0 B32522Q8154+* 680 700 500 0.15 ∇ 8.0 × 14.0 × 18.0 B32522T8154+* 750 500 0.22 ∇ 9.0 × 17.5 × 18.0 B32522Q8224+* 640 700 500 0.33 ∇ 11.0 × 18.5 × 18.0 B32522Q8334+* 550 300 B32522 General purpose (stacked/wound)

Ordering codes and packing units (lead spacing 22.5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 3.3 6.0 × 15.0 × 26.5 B32523Q0335+* 680 700 720 4.7 7.0 × 16.0 × 26.5 B32523Q0475+* 580 600 630 6.8 8.5 × 16.5 × 26.5 B32523Q0685+* 480 500 510 10 10.5 × 18.5 × 26.5 B32523Q0106+* 390 400 540 15 12.0 × 22.0 × 26.5 B32523Q0156+* 450 100 63 1.5 6.0 × 15.0 × 26.5 B32523Q1155+* 680 700 720 2.2 6.0 × 15.0 × 26.5 B32523Q1225+* 680 700 720 3.3 6.0 × 15.0 × 26.5 B32523Q1335+* 680 700 720 4.7 7.0 × 16.0 × 26.5 B32523Q1475+* 580 600 630 6.8 8.5 × 16.5 × 26.5 B32523Q1685+* 480 500 510 10 10.5 × 18.5 × 26.5 B32523Q1106+* 390 400 540 15 12.0 × 22.0 × 26.5 B32523Q1156+* 450 250 160 0.47 6.0 × 15.0 × 26.5 B32523Q3474+* 680 700 720 0.68 6.0 × 15.0 × 26.5 B32523Q3684+* 680 700 720 1.0 6.0 × 15.0 × 26.5 B32523Q3105+* 680 700 720 1.5 7.0 × 16.0 × 26.5 B32523Q3155+* 580 600 630 2.2 10.5 × 16.5 × 26.5 B32523Q3225+* 390 400 540 3.3 11.0 × 20.5 × 26.5 B32523Q3335+* 370 350 510 400 200 0.22 6.0 × 15.0 × 26.5 B32523Q6224+* 680 700 720 0.33 6.0 × 15.0 × 26.5 B32523Q6334+* 680 700 720 0.47 7.0 × 16.0 × 26.5 B32523Q6474+* 580 600 630 0.68 8.5 × 16.5 × 26.5 B32523Q6684+* 480 500 510 1.0 10.5 × 16.5 × 26.5 B32523Q6105+* 390 400 540 1.5 11.0 × 20.5 × 26.5 B32523Q6155+* 370 350 510 630 200 0.10 6.0 × 15.0 × 26.5 B32523Q8104+* 680 700 720 0.15 6.0 × 15.0 × 26.5 B32523Q8154+* 680 700 720 0.22 7.0 × 16.0 × 26.5 B32523Q8224+* 580 600 630 0.33 10.5 × 16.5 × 26.5 B32523Q8334+* 390 400 540 0.47 10.5 × 20.5 × 26.5 B32523Q8474+* 390 400 540 0.68 12.0 × 22.0 × 26.5 B32523Q8684+*** 450 B32523 General purpose (wound)

Ordering codes and packing units (lead spacing 27.5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 4.7 11.0 × 21.0 × 31.5 B32524Q0475+* 350 320 6.8 11.0 × 21.0 × 31.5 B32524Q0685+* 350 320 10 11.0 × 21.0 × 31.5 B32524Q0106+* 350 320 15 11.0 × 21.0 × 31.5 B32524Q0156+* 300 280 22 14.0 × 24.5 × 31.5 B32524Q0226+* 350 320 33 18.0 × 27.5 × 31.5 B32524Q0336+* 200 47 21.0 × 31.0 × 31.5 B32524Q0476+* 180 68 22.0 × 36.5 × 31.5 B32524Q0686+* 160 100 63 4.7 11.0 × 21.0 × 31.5 B32524Q1475+* 350 320 6.8 11.0 × 21.0 × 31.5 B32524Q1685+* 350 320 10 11.0 × 21.0 × 31.5 B32524Q1106+* 350 320 15 11.0 × 21.0 × 31.5 B32524Q1156+* 300 280 22 14.0 × 24.5 × 31.5 B32524Q1226+* 350 320 33 18.0 × 27.5 × 31.5 B32524Q1336+* 200 47 21.0 × 31.0 × 31.5 B32524Q1476+* 180 68 22.0 × 36.5 × 31.5 B32524Q1686+* 160 250 160 1.5 11.0 × 21.0 × 31.5 B32524Q3155+* 350 320 2.2 11.0 × 21.0 × 31.5 B32524Q3225+* 350 320 3.3 11.0 × 21.0 × 31.5 B32524Q3335+* 350 320 4.7 11.0 × 21.0 × 31.5 B32524Q3475+* 350 320 6.8 14.0 × 24.5 × 31.5 B32524Q3685+* 250 260 10 18.0 × 27.5 × 31.5 B32524Q3106+* 200 15 19.0 × 30.0 × 31.5 B32524Q3156+* 180 400 200 0.68 11.0 × 19.0 × 31.5 B32524Q6684+* 350 320 1.0 11.0 × 19.0 × 31.5 B32524Q6105+* 350 320 1.5 11.0 × 19.0 × 31.5 B32524Q6155+* 350 320 2.2 12.5 × 21.5 × 31.5 B32524Q6225+* 300 280 3.3 15.0 × 24.5 × 31.5 B32524Q6335+* 240 4.7 18.0 × 27.5 × 31.5 B32524Q6475+* 200 6.8 21.0 × 31.0 × 31.5 B32524Q6685+*** 180 B32524 General purpose (wound)

Ordering codes and packing units (lead spacing 27.5 mm) VR VDC Vrms f ≤60 Hz VAC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 630 220 0.33 11.0 × 21.0 × 31.5 B32524Q8334+* 350 320 0.47 11.0 × 21.0 × 31.5 B32524Q8474+* 350 320 0.68 11.0 × 21.0 × 31.5 B32524Q8684+* 350 320 1.0 14.0 × 24.5 × 31.5 B32524Q8105+* 250 260 1.5 18.0 × 27.5 × 31.5 B32524Q8155+* 200 2.2 21.0 × 31.0 × 31.5 B32524Q8225+*** 180 B32524 General purpose (wound)

Operating temperature range Max. operating temperature Top,max +125 °C Upper category temperature Tmax +125 °C Lower category temperature Tmin 55 °C Rated temperature TR +85 °C Dissipation factor tan δ (in 10-3) at CR ≤ 0.1 µF 0.1 µF < CR ≤ 1 µF CR > 1 µF at 20 °C 1 kHz 8 8 10 (upper limit values) 10 kHz 15 15 100 kHz 30 Insulation resistance Rins VR CR ≤ 0.33 µF CR > 0.33 µF or time constant τ = CR Rins ≤ 100 VDC 3750 MΩ 1250 s at 20 °C, rel. humidity ≤ 65% ≥ 250 VDC 7500 MΩ 2500 s (minimum as-delivered values) DC test voltage 1.4 VR, 2 s Category voltage VC TA (°C) DC voltage derating AC voltage derating (continuous operation with VDC TA ≤ 85 VC = VR VC,rms = Vrms or VAC at f ≤ 60 Hz) 85<TA≤125 VC = VR (165 TA)/80 VC,rms=Vrms (165 TA)/80 Operating voltage Vop for TA (°C) DC voltage (max. hours) AC voltage (max. hours) short operating periods TA ≤ 100 Vop = 1.25 VC (2000 h) Vop = 1.0 VC,rms (2000 h) (VDC or VAC at f ≤ 60 Hz) 100<TA≤125 Vop = 1.25 VC (1000 h) Vop = 1.0 VC,rms (1000 h) Damp heat test 56 days/40 °C/93% relative humidity Limit values after damp Capacitance change ΔC/C ≤ 5% heat test Dissipation factor change Δ tan δ ≤ 5 10-3 (at 1 kHz) Insulation resistance Rins ≥ 50% of minimum or time constant τ = CR Rins as-delivered values Reliability: Failure rate λ 1 fit (≤ 1 10-9/h) at 0.5 VR, 40 °C Service life tSL 200 000 h at 1.0 VR, 40 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality assurance", page . Failure criteria: Total failure Short circuit or open circuit Failure due to variation Capacitance change ΔC/C > 10% of parameters Dissipation factor tan δ > 2 upper limit value Insulation resistance Rins < 150 MΩ (CR ≤ 0.33 µF) or time constant τ = CR Rins < 50 s (CR > 0.33 µF) B32520 ... B32529 General purpose (stacked/wound)

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm Technology Stacked Stacked Stacked Wound Stacked Wound Wound Wound VR Vrms VDC VAC dV/dt in V/µs 50 32 200 63 40 250 120 50 30 3 1 100 63 300 150 75 50 5 4 3 250 160 400 200 150 100 10 6 4.5 400 200 600 275 175 125 10 7.5 450 200 20 630 400 800 20 25 15 12 k0 values Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm Technology Stacked Stacked Stacked Wound Stacked Wound Wound Wound VR Vrms VDC VAC k0 in V2/µs 50 32 20 000 63 40 30 000 15 000 6 300 3 800 375 130 100 63 60 000 30 000 15 000 10 000 850 750 600 250 160 200 000 100 000 75 000 50 000 5 000 3 000 2 250 400 200 500 000 220 000 140 000 100 000 8 000 6 000 450 200 15 000 630 400 1 000 000 25 000 30 000 18 000 15 000 B32520 ... B32529 General purpose (stacked/wound)

Impedance Z versus frequency f (typical values) B32520 ... B32529 General purpose (stacked/wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm

50 VDC/32 VAC 63 VDC/40 VAC

100 VDC/63 VAC 250 VDC/160 VAC

General purpose (stacked)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm

400 VDC/200 VAC 630 VDC/400 VAC

General purpose (stacked)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm

63 VDC/40 VAC 100 VDC/63 VAC

250 VDC/160 VAC 400 VDC/200 VAC

General purpose (stacked)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm General purpose (stacked/wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm

630 VDC/200 VAC

General purpose (stacked/wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm General purpose (stacked/wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm

450 VDC/200 VAC 630 VDC/200 VAC

General purpose (stacked/wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm General purpose (wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm General purpose (wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm General purpose (wound)

Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm

630 VDC/220 VAC

General purpose (wound)