B32520

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 46

Technical content

Metallized Polyester Film Capacitors (MKT) Series/Type: B32520 ... B32529 Date: May 2009 © EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Coupling, decoupling Bypassing RFI for automotive Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1): 55/125/56 Construction Dielectric: polyethylene terephthalate (polyester, PET) Stacked-film technology for lead spacing 5 to 15 mm = code C, D or E in digit 7 of ordering code Wound capacitor technology for lead spacing 10 to 27.5 mm = code N, Q or R in digit 7 of ordering code Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0)

Features

Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated DC voltage, date of manufacture (coded), coded type ("1") for lead spacing 5 mm, series and lot number for lead spacing ≥10 mm Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". Dimensional drawing Dimensions in mm Lead spacing ±0.4 Lead diameter Type 1) 0.5 mm for capacitor width w = 4 mm 5.0 0.5 B32529 7.5 0.5 B32520 10.0 0.61) B32521 15.0 0.8 B32522 22.5 0.8 B32523 27.5 0.8 B32524 37.5 1.0 B32526 Metallized polyester film capacitors (MKT) B32520 ... B32529 General purpose (stacked/wound) Page 2 of 46Please read Important notes at the end of this document.

Overview of available types Technology: s = Stacked-film technology / w = Wound capacitor technology Lead spacing 5.0 mm 7.5 mm 10.0 mm Type B32529 B32520 B32521 Page 6 10 12 Technology s s s s s s s s s s s s s w VR (V DC) 63 100 250 400 630 63 100 250 400 63 100 250 400 630 VRMS (V AC) 40 63 160 200 400 40 63 160 200 40 63 160 200 200 CR (µF) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 B32520 ... B32529 General purpose (stacked/wound) Page 3 of 46Please read Important notes at the end of this document.

Overview of available types Technology: s = Stacked-film technology / w = Wound capacitor technology Lead spacing 15.0 mm 22.5 mm 27.5 mm Type B32522 B32523 B32524 Page 14 17 18 Technology s s/w s/w s w w w w w w w w w w w w VR (V DC) 63 100 250 400 450 630 63 100 250 400 630 63 100 250 400 630 VRMS (V AC) 40 63 160 200 200 200 40 63 160 200 200 40 63 160 200 220 CR (µF) 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 B32520 ... B32529 General purpose (stacked/wound) Page 4 of 46Please read Important notes at the end of this document.

Overview of available types Technology: s = Stacked-film technology / w = Wound capacitor technology Lead spacing 37.5 mm Type B32526 Page 20 Technology w w w w VR (V DC) 63 100 250 400 VRMS (V AC) 40 63 160 200 CR (µF) 3.3 4.7 6.8 100 150 220 B32520 ... B32529 General purpose (stacked/wound) Page 5 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.0010 2.5 × 6.5 × 7.2 B32529C0102+* 12800 11200 8000 0.0015 2.5 × 6.5 × 7.2 B32529C0152+* 12800 11200 8000 0.0022 2.5 × 6.5 × 7.2 B32529C0222+* 12800 11200 8000 0.0033 2.5 × 6.5 × 7.2 B32529C0332+* 12800 11200 8000 0.0047 2.5 × 6.5 × 7.2 B32529C0472+* 12800 11200 8000 0.0068 2.5 × 6.5 × 7.2 B32529C0682+* 12800 11200 8000 0.010 2.5 × 6.5 × 7.2 B32529C0103+* 12800 11200 8000 0.015 2.5 × 6.5 × 7.2 B32529C0153+* 12800 11200 8000 0.022 2.5 × 6.5 × 7.2 B32529C0223+* 12800 11200 8000 0.033 2.5 × 6.5 × 7.2 B32529C0333+* 12800 11200 8000 0.047 2.5 × 6.5 × 7.2 B32529C0473+* 12800 11200 8000 0.068 2.5 × 6.5 × 7.2 B32529C0683+* 12800 11200 8000 0.10 2.5 × 6.5 × 7.2 B32529C0104+* 12800 11200 8000 0.15 2.5 × 6.5 × 7.2 B32529C0154+* 12800 11200 8000 0.22 2.5 × 6.5 × 7.2 B32529C0224+* 12800 11200 8000 0.33 3.0 × 6.5 × 7.2 B32529C0334+* 10800 9600 8000 0.47 3.5 × 8.0 × 7.2 B32529C0474+* 9200 8000 8000 0.68 4.5 × 9.5 × 7.3 B32529C0684+* 7200 6000 6000 1.0 4.5 × 9.5 × 7.3 B32529C0105+* 7200 6000 6000 1.5 6.0 × 10.5 × 7.5 B32529C0155+* 5200 4400 4000 2.2 7.8 × 13.0 × 7.8 B32529D0225+* 4000 3200 4000 3.3 7.8 × 13.0 × 7.8 B32529D0335+* 4000 3200 4000 4.7 7.8 × 13.0 × 7.8 B32529D0475M* 4000 3200 4000 B32529 General purpose (stacked) Page 6 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 100 63 0.0010 2.5 × 6.5 × 7.2 B32529C1102+* 12800 11200 8000 0.0015 2.5 × 6.5 × 7.2 B32529C1152+* 12800 11200 8000 0.0022 2.5 × 6.5 × 7.2 B32529C1222+* 12800 11200 8000 0.0033 2.5 × 6.5 × 7.2 B32529C1332+* 12800 11200 8000 0.0047 2.5 × 6.5 × 7.2 B32529C1472+* 12800 11200 8000 0.0068 2.5 × 6.5 × 7.2 B32529C1682+* 12800 11200 8000 0.010 2.5 × 6.5 × 7.2 B32529C1103+* 12800 11200 8000 0.015 2.5 × 6.5 × 7.2 B32529C1153+* 12800 11200 8000 0.022 2.5 × 6.5 × 7.2 B32529C1223+* 12800 11200 8000 0.033 2.5 × 6.5 × 7.2 B32529C1333+* 12800 11200 8000 0.047 2.5 × 6.5 × 7.2 B32529C1473+* 12800 11200 8000 0.068 2.5 × 6.5 × 7.2 B32529C1683+* 12800 11200 8000 0.10 2.5 × 6.5 × 7.2 B32529C1104+* 12800 11200 8000 0.15 3.0 × 6.5 × 7.2 B32529C1154+* 10800 9600 8000 0.22 3.5 × 8.0 × 7.2 B32529C1224+* 9200 8000 8000 0.33 3.5 × 8.0 × 7.2 B32529C1334+* 9200 8000 8000 0.47 4.5 × 9.5 × 7.3 B32529C1474+* 7200 6000 6000 0.68 6.0 × 10.5 × 7.5 B32529C1684+* 5200 4400 4000 1.0 7.8 × 13.0 × 7.8 B32529D1105+* 4000 3200 4000 B32529 General purpose (stacked) Page 7 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 250 160 0.0010 2.5 × 6.5 × 7.2 B32529C3102+* 12800 11200 8000 0.0015 2.5 × 6.5 × 7.2 B32529C3152+* 12800 11200 8000 0.0022 2.5 × 6.5 × 7.2 B32529C3222+* 12800 11200 8000 0.0033 2.5 × 6.5 × 7.2 B32529C3332+* 12800 11200 8000 0.0047 2.5 × 6.5 × 7.2 B32529C3472+* 12800 11200 8000 0.0068 2.5 × 6.5 × 7.2 B32529C3682+* 12800 11200 8000 0.010 2.5 × 6.5 × 7.2 B32529C3103+* 12800 11200 8000 0.015 2.5 × 6.5 × 7.2 B32529C3153+* 12800 11200 8000 0.022 2.5 × 6.5 × 7.2 B32529C3223+* 12800 11200 8000 0.033 3.0 × 6.5 × 7.2 B32529C3333+* 10800 9600 8000 0.047 3.5 × 8.0 × 7.2 B32529C3473+* 9200 8000 8000 0.068 4.5 × 9.5 × 7.3 B32529C3683+* 7200 6000 6000 0.10 4.5 × 9.5 × 7.3 B32529C3104+* 7200 6000 6000 0.15 5.0 × 10.0 × 7.5 B32529C3154+* 6400 5600 6000 0.22 7.8 × 13.0 × 7.8 B32529D3224+* 4000 3200 4000 0.33 7.8 × 13.0 × 7.8 B32529C3334+* 4000 3200 4000 0.47 7.8 × 13.0 × 7.8 B32529C3474+* 4000 3200 4000 B32529 General purpose (stacked) Page 8 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 400 200 0.0010 2.5 × 6.5 × 7.2 B32529C6102+* 12800 11200 8000 0.0015 2.5 × 6.5 × 7.2 B32529C6152+* 12800 11200 8000 0.0022 2.5 × 6.5 × 7.2 B32529C6222+* 12800 11200 8000 0.0033 2.5 × 6.5 × 7.2 B32529C6332+* 12800 11200 8000 0.0047 2.5 × 6.5 × 7.2 B32529C6472+* 12800 11200 8000 0.0068 2.5 × 6.5 × 7.2 B32529C6682+* 12800 11200 8000 0.010 3.0 × 6.5 × 7.2 B32529E6103+* 10800 9600 8000 0.015 3.0 × 6.5 × 7.2 B32529E6153+* 10800 9600 8000 0.022 3.5 × 8.0 × 7.2 B32529E6223+* 9200 8000 8000 0.033 4.5 × 9.5 × 7.3 B32529E6333+* 7200 6000 6000 0.047 4.5 × 9.5 × 7.3 B32529E6473+* 7200 6000 6000 0.068 6.0 × 10.5 × 7.5 B32529E6683+* 5200 4400 4000 0.10 7.8 × 13.0 × 7.8 B32529E6104+* 4000 3200 4000 0.15 7.8 × 13.0 × 7.8 B32529E6154+* 4000 3200 4000 630 400 0.0010 2.5 × 6.5 × 7.2 B32529C8102+* 12800 11200 8000 0.0015 2.5 × 6.5 × 7.2 B32529C8152+* 12800 11200 8000 0.0022 2.5 × 6.5 × 7.2 B32529C8222+* 12800 11200 8000 0.0033 3.5 × 8.0 × 7.2 B32529C8332+* 9200 8000 8000 0.0047 3.5 × 8.0 × 7.2 B32529C8472+* 9200 8000 8000 0.0068 3.5 × 8.0 × 7.2 B32529C8682+* 9200 8000 8000 0.010 5.0 × 10.0 × 7.5 B32529C8103+* 6400 5600 6000 0.015 5.0 × 10.0 × 7.5 B32529C8153+* 6400 5600 6000 0.022 7.8 × 13.0 × 7.8 B32529C8223+* 5200 4400 4000 0.033 7.8 × 13.0 × 7.8 B32529C8333+*** 4000 3200 4000 B32529 General purpose (stacked) Page 9 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 7.5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.068 2.5 × 7.0 × 10.0 B32520C0683+* 12800 11200 10000 0.10 2.5 × 7.0 × 10.0 B32520C0104+* 12800 11200 10000 0.15 2.5 × 7.0 × 10.0 B32520C0154+* 12800 11200 10000 0.22 2.5 × 7.0 × 10.0 B32520C0224+* 12800 11200 10000 0.33 2.5 × 7.0 × 10.0 B32520C0334+* 12800 11200 10000 0.47 3.0 × 8.0 × 10.0 B32520C0474+* 10400 9600 8000 0.68 4.0 × 8.5 × 10.0 B32520C0684+* 8000 7200 6000 1.0 5.0 × 10.5 × 10.0 B32520C0105+* 6400 5600 4000 1.5 5.0 × 10.5 × 10.0 B32520C0155+* 6400 5600 4000 2.2 6.0 × 12.0 × 10.3 B32520C0225+* 5200 4400 3000 100 63 0.047 2.5 × 7.0 × 10.0 B32520C1473+* 12800 11200 10000 0.068 2.5 × 7.0 × 10.0 B32520C1683+* 12800 11200 10000 0.10 2.5 × 7.0 × 10.0 B32520C1104+* 12800 11200 10000 0.15 3.0 × 8.0 × 10.0 B32520C1154+* 10400 9600 8000 0.22 3.0 × 8.0 × 10.0 B32520C1224+* 10400 9600 8000 0.33 4.0 × 8.5 × 10.0 B32520C1334+* 8000 7200 6000 0.47 5.0 × 10.5 × 10.0 B32520C1474+* 6400 5600 4000 0.68 6.0 × 12.0 × 10.3 B32520C1684+* 5200 4400 3000 1.0 6.0 × 12.0 × 10.3 B32520C1105+* 5200 4400 3000 250 160 0.015 2.5 × 7.0 × 10.0 B32520C3153+* 12800 11200 10000 0.022 2.5 × 7.0 × 10.0 B32520C3223+* 12800 11200 10000 0.033 2.5 × 7.0 × 10.0 B32520C3333+* 12800 11200 10000 0.047 2.5 × 7.0 × 10.0 B32520C3473+* 12800 11200 10000 0.068 3.0 × 8.0 × 10.0 B32520C3683+* 10400 9600 8000 0.10 4.0 × 8.5 × 10.0 B32520C3104+* 8000 7200 6000 0.15 5.0 × 10.5 × 10.0 B32520C3154+* 6400 5600 4000 0.22 6.0 × 12.0 × 10.3 B32520C3224+* 5200 4400 3000 B32520 General purpose (stacked) Page 10 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 7.5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 400 200 0.0010 2.5 × 7.0 × 10.0 B32520C6102+* 12800 11200 10000 0.0015 2.5 × 7.0 × 10.0 B32520C6152+* 12800 11200 10000 0.0022 2.5 × 7.0 × 10.0 B32520C6222+* 12800 11200 10000 0.0033 2.5 × 7.0 × 10.0 B32520C6332+* 12800 11200 10000 0.0047 2.5 × 7.0 × 10.0 B32520C6472+* 12800 11200 10000 0.0068 2.5 × 7.0 × 10.0 B32520C6682+* 12800 11200 10000 0.010 2.5 × 7.0 × 10.0 B32520C6103+* 12800 11200 10000 0.015 3.0 × 8.0 × 10.0 B32520E6153+* 10400 9600 8000 0.022 3.0 × 8.0 × 10.0 B32520E6223+* 10400 9600 8000 0.033 4.0 × 8.5 × 10.0 B32520E6333+* 8000 7200 6000 0.047 4.0 × 8.5 × 10.0 B32520E6473+* 8000 7200 6000 0.068 5.0 × 10.5 × 10.0 B32520E6683+* 6400 5600 4000 0.10 5.0 × 10.5 × 10.0 B32520E6104+* 6400 5600 4000 0.15 6.0 × 12.0 × 10.3 B32520E6154+*** 5200 4400 3000 B32520 General purpose (stacked) Page 11 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 10 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.47 4.0 × 7.0 × 13.0 B32521C0474+* 4000 6800 4000 0.68 4.0 × 7.0 × 13.0 B32521C0684+* 4000 6800 4000 1.0 4.0 × 9.0 × 13.0 B32521C0105+* 4000 6800 4000 1.5 5.0 × 11.0 × 13.0 B32521C0155+* 3320 5200 4000 2.2 5.0 × 11.0 × 13.0 B32521C0225+* 3320 5200 4000 3.3 6.0 × 12.0 × 13.0 B32521C0335+* 2720 4400 4000 100 63 0.10 4.0 × 7.0 × 13.0 B32521C1104+* 4000 6800 4000 0.15 4.0 × 7.0 × 13.0 B32521C1154+* 4000 6800 4000 0.22 4.0 × 7.0 × 13.0 B32521C1224+* 4000 6800 4000 0.33 4.0 × 7.0 × 13.0 B32521C1334+* 4000 6800 4000 0.47 4.0 × 9.0 × 13.0 B32521C1474+* 4000 6800 4000 0.68 5.0 × 11.0 × 13.0 B32521C1684+* 3320 5200 4000 1.0 6.0 × 12.0 × 13.0 B32521C1105+* 2720 4400 4000 250 160 0.033 4.0 × 7.0 × 13.0 B32521C3333+* 4000 6800 4000 0.047 4.0 × 7.0 × 13.0 B32521C3473+* 4000 6800 4000 0.068 4.0 × 7.0 × 13.0 B32521C3683+* 4000 6800 4000 0.10 4.0 × 7.0 × 13.0 B32521C3104+* 4000 6800 4000 0.15 4.0 × 9.0 × 13.0 B32521C3154+* 4000 6800 4000 0.22 5.0 × 11.0 × 13.0 B32521C3224+* 3320 5200 4000 0.33 5.0 × 11.0 × 13.0 B32521C3334+* 3320 5200 4000 0.47 6.0 × 12.0 × 13.0 B32521C3474+* 2720 4400 4000 400 200 0.010 4.0 × 7.0 × 13.0 B32521E6103+* 4000 6800 4000 0.015 4.0 × 7.0 × 13.0 B32521E6153+* 4000 6800 4000 0.022 4.0 × 7.0 × 13.0 B32521E6223+* 4000 6800 4000 0.033 4.0 × 7.0 × 13.0 B32521E6333+* 4000 6800 4000 0.047 4.0 × 9.0 × 13.0 B32521E6473+* 4000 6800 4000 0.068 4.0 × 9.0 × 13.0 B32521E6683+* 4000 6800 4000 0.10 5.0 × 11.0 × 13.0 B32521E6104+* 3320 5200 4000 0.15 6.0 × 12.0 × 13.0 B32521E6154+* 2720 4400 4000 B32521 General purpose (stacked/wound) Page 12 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 10 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 630 200 0.0068 ∇ 4.0 × 9.0 × 13.0 B32521N8682+* 4000 6800 4000 0.010 ∇ 4.0 × 9.0 × 13.0 B32521N8103+* 4000 6800 4000 0.015 ∇ 5.0 × 11.0 × 13.0 B32521N8153+* 3320 5200 4000 0.022 ∇ 5.0 × 11.0 × 13.0 B32521N8223+* 3320 5200 4000 0.033 ∇ 6.0 × 12.0 × 13.0 B32521N8333+* 2720 4400 4000 B32521 General purpose (stacked/wound) Page 13 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 15 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 0.68 5.0 × 10.5 × 18.0 B32522C0684+* 4680 5200 4000 1.0 5.0 × 10.5 × 18.0 B32522C0105+* 4680 5200 4000 1.5 5.0 × 10.5 × 18.0 B32522C0155+* 4680 5200 4000 2.2 5.0 × 10.5 × 18.0 B32522C0225+* 4680 5200 4000 3.3 6.0 × 11.0 × 18.0 B32522C0335+* 3840 4400 4000 4.7 7.0 × 12.5 × 18.0 B32522C0475+* 3320 3600 4000 6.8 8.5 × 14.5 × 18.0 B32522C0685+* 2720 2800 2000 10 9.0 × 17.5 × 18.0 B32522C0106+* 2560 2800 2000 100 63 0.33 5.0 × 10.5 × 18.0 B32522C1334+* 4680 5200 4000 0.47 5.0 × 10.5 × 18.0 B32522C1474+* 4680 5200 4000 0.68 5.0 × 10.5 × 18.0 B32522C1684+* 4680 5200 4000 1.0 5.0 × 10.5 × 18.0 B32522C1105+* 4680 5200 4000 1.0 ∇ 6.0 × 11.0 × 18.0 B32522Q1105+* 3840 4400 4000 1.5 6.0 × 11.0 × 18.0 B32522C1155+* 3840 4400 4000 1.5 ∇ 7.0 × 12.5 × 18.0 B32522Q1155+* 3320 3600 4000 2.2 7.0 × 12.5 × 18.0 B32522C1225+* 3320 3600 4000 2.2 ∇ 8.5 × 14.5 × 18.0 B32522Q1225+* 2720 2800 2000 3.3 8.5 × 14.5 × 18.0 B32522C1335+* 2720 2800 2000 3.3 ∇ 9.0 × 17.5 × 18.0 B32522Q1335+* 2560 2800 2000 4.7 9.0 × 17.5 × 18.0 B32522C1475+* 2560 2800 2000 4.7 ∇ 11.0 × 18.5 × 18.0 B32522Q1475+* 2200 1200 B32522 General purpose (stacked/wound) Page 14 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 15 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 250 160 0.10 5.0 × 10.5 × 18.0 B32522C3104+* 4680 5200 4000 0.15 5.0 × 10.5 × 18.0 B32522C3154+* 4680 5200 4000 0.22 5.0 × 10.5 × 18.0 B32522C3224+* 4680 5200 4000 0.33 5.0 × 10.5 × 18.0 B32522C3334+* 4680 5200 4000 0.47 6.0 × 11.0 × 18.0 B32522C3474+* 3840 4400 4000 0.68 7.0 × 12.5 × 18.0 B32522C3684+* 3320 3600 4000 1.0 8.5 × 14.5 × 18.0 B32522C3105+* 2720 2800 2000 1.0 ∇ 8.5 × 14.5 × 18.0 B32522N3105+* 2720 2800 2000 1.5 9.0 × 17.5 × 18.0 B32522C3155+* 2560 2800 2000 1.5 ∇ 9.0 × 17.5 × 18.0 B32522N3155+* 2560 2800 2000 400 200 0.047 5.0 × 10.5 × 18.0 B32522E6473+* 4680 5200 4000 0.068 5.0 × 10.5 × 18.0 B32522E6683+* 4680 5200 4000 0.10 5.0 × 10.5 × 18.0 B32522E6104+* 4680 5200 4000 0.15 5.0 × 10.5 × 18.0 B32522E6154+* 4680 5200 4000 0.22 6.0 × 11.0 × 18.0 B32522E6224+* 3840 4400 4000 0.33 7.0 × 12.5 × 18.0 B32522E6334+* 3320 3600 4000 0.47 9.0 × 17.5 × 18.0 B32522E6474+* 2560 2800 2000 0.68 9.0 × 17.5 × 18.0 B32522E6684+* 2560 2800 2000 450 200 0.10 ∇ 5.0 × 10.5 × 18.0 B32522N6104+* 4680 5200 4000 0.15 ∇ 5.0 × 10.5 × 18.0 B32522N6154+* 4680 5200 4000 0.22 ∇ 6.0 × 11.0 × 18.0 B32522N6224+* 3840 4400 4000 0.33 ∇ 7.0 × 12.5 × 18.0 B32522N6334+* 3320 3600 4000 0.47 ∇ 8.5 × 14.5 × 18.0 B32522N6474+* 2720 2800 2000 0.68 ∇ 9.0 × 17.5 × 18.0 B32522N6684+* 2560 2800 2000 1.0 ∇ 11.0 × 18.5 × 18.0 B32522N6105+* 2200 1200 B32522 General purpose (stacked/wound) Page 15 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 15 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./ MOQ Untaped pcs./ MOQ ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 630 200 0.033 ∇ 5.0 × 10.5 × 18.0 B32522Q8333+* 4680 5200 4000 0.047 ∇ 5.0 × 10.5 × 18.0 B32522Q8473+* 4680 5200 4000 0.068 ∇ 6.0 × 11.0 × 18.0 B32522Q8683+* 3840 4400 4000 0.10 ∇ 7.0 × 12.5 × 18.0 B32522Q8104+* 3320 3600 4000 0.15 ∇ 8.5 × 14.5 × 18.0 B32522Q8154+* 2720 2800 2000 0.22 ∇ 9.0 × 17.5 × 18.0 B32522Q8224+* 2560 2800 2000 0.33 ∇ 11.0 × 18.5 × 18.0 B32522Q8334+* 2200 1200 B32522 General purpose (stacked/wound) Page 16 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 22.5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 3.3 6.0 × 15.0 × 26.5 B32523R0335+* 2720 2800 2880 4.7 6.0 × 15.0 × 26.5 B32523R0475+* 2720 2800 2880 6.8 6.0 × 15.0 × 26.5 B32523R0685+* 2720 2800 2880 10 7.0 × 16.0 × 26.5 B32523R0106+* 2320 2400 2520 15 10.5 × 16.5 × 26.5 B32523R0156+* 1560 1600 2160 22 12.0 × 22.0 × 26.5 B32523R0226+* 1800 100 63 1.5 6.0 × 15.0 × 26.5 B32523Q1155+* 2720 2800 2880 2.2 6.0 × 15.0 × 26.5 B32523Q1225+* 2720 2800 2880 3.3 6.0 × 15.0 × 26.5 B32523Q1335+* 2720 2800 2880 4.7 7.0 × 16.0 × 26.5 B32523Q1475+* 2320 2400 2540 6.8 8.5 × 16.5 × 26.5 B32523Q1685+* 1960 2000 2040 10 10.5 × 16.5 × 26.5 B32523Q1106+* 1560 1600 2160 15 12.0 × 22.0 × 26.5 B32523Q1156+* 1800 250 160 0.47 6.0 × 15.0 × 26.5 B32523Q3474+* 2720 2800 2880 0.68 6.0 × 15.0 × 26.5 B32523Q3684+* 2720 2800 2880 1.0 6.0 × 15.0 × 26.5 B32523Q3105+* 2720 2800 2880 1.5 7.0 × 16.0 × 26.5 B32523Q3155+* 2320 2400 2520 2.2 10.5 × 16.5 × 26.5 B32523Q3225+* 1560 1600 2160 3.3 11.0 × 20.5 × 26.5 B32523Q3335+* 1480 1400 2040 400 200 0.22 6.0 × 15.0 × 26.5 B32523Q6224+* 2720 2800 2880 0.33 6.0 × 15.0 × 26.5 B32523Q6334+* 2720 2800 2880 0.47 7.0 × 16.0 × 26.5 B32523Q6474+* 2320 2400 2520 0.68 8.5 × 16.5 × 26.5 B32523Q6684+* 1920 2000 2040 1.0 10.5 × 16.5 × 26.5 B32523Q6105+* 1560 1600 2160 1.5 11.0 × 20.5 × 26.5 B32523Q6155+* 1480 1400 2040 630 200 0.10 6.0 × 15.0 × 26.5 B32523Q8104+* 2720 2800 2880 0.15 6.0 × 15.0 × 26.5 B32523Q8154+* 2720 2800 2880 0.22 7.0 × 16.0 × 26.5 B32523Q8224+* 2320 2400 2520 0.33 10.5 × 16.5 × 26.5 B32523Q8334+* 1560 1600 2160 0.47 10.5 × 20.5 × 26.5 B32523Q8474+* 1560 1600 2160 0.68 12.0 × 22.0 × 26.5 B32523Q8684+* 1800 B32523 General purpose (wound) Page 17 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 27.5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 4.7 11.0 × 21.0 × 31.5 B32524R0475+* 1400 1280 6.8 11.0 × 21.0 × 31.5 B32524Q0685+* 1400 1280 10 11.0 × 21.0 × 31.5 B32524R0106+* 1400 1280 15 11.0 × 21.0 × 31.5 B32524R0156+* 1400 1280 22 11.0 × 21.0 × 31.5 B32524R0226+* 1400 1280 33 12.5 × 21.5 × 31.5 B32524R0336+* 1200 1120 47 14.0 × 24.5 × 31.5 B32524R0476+* 1000 1040 68 18.0 × 27.5 × 31.5 B32524R0686+* 800 100 22.0 × 36.5 × 31.5 B32524R0107+* 640 100 63 4.7 11.0 × 21.0 × 31.5 B32524Q1475+* 1400 1280 6.8 11.0 × 21.0 × 31.5 B32524Q1685+* 1400 1280 10 11.0 × 21.0 × 31.5 B32524Q1106+* 1400 1280 15 11.0 × 21.0 × 31.5 B32524Q1156+* 1400 1280 22 13.5 × 23.0 × 31.5 B32524Q1226+* 1000 1040 33 18.0 × 27.5 × 31.5 B32524Q1336+* 800 47 19.0 × 30.0 × 31.5 B32524Q1476+* 720 68 22.0 × 36.5 × 31.5 B32524Q1686+* 640 250 160 1.5 11.0 × 21.0 × 31.5 B32524Q3155+* 1400 1280 2.2 11.0 × 21.0 × 31.5 B32524Q3225+* 1400 1280 3.3 11.0 × 21.0 × 31.5 B32524Q3335+* 1400 1280 4.7 11.0 × 21.0 × 31.5 B32524Q3475+* 1400 1280 6.8 11.0 × 21.0 × 31.5 B32524R3685+* 1400 1280 10 12.5 × 21.5 × 31.5 B32524R3106+* 1200 1120 15 15.0 × 24.5 × 31.5 B32524R3156+* 960 22 19.0 × 30.0 × 31.5 B32524R3226+* 720 33 22.0 × 36.5 × 31.5 B32524R3336+*** 640 B32524 General purpose (wound) Page 18 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 27.5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 400 200 0.68 11.0 × 19.0 × 31.5 B32524Q6684+* 1400 1280 1.0 11.0 × 19.0 × 31.5 B32524Q6105+* 1400 1280 1.5 11.0 × 19.0 × 31.5 B32524Q6155+* 1400 1280 2.2 11.0 × 21.0 × 31.5 B32524R6225+* 1400 1280 3.3 14.0 × 24.5 × 31.5 B32524R6335+* 1000 1040 4.7 14.0 × 24.5 × 31.5 B32524R6475+* 1000 1040 6.8 18.0 × 27.5 × 31.5 B32524R6685+* 800 10 22.0 × 36.5 × 31.5 B32524R6106+* 640 630 220 0.33 11.0 × 21.0 × 31.5 B32524Q8334+* 1400 1280 0.47 11.0 × 21.0 × 31.5 B32524Q8474+* 1400 1280 0.68 11.0 × 21.0 × 31.5 B32524Q8684+* 1400 1280 1.0 14.0 × 24.5 × 31.5 B32524Q8105+* 1000 1040 1.5 18.0 × 27.5 × 31.5 B32524Q8155+* 800 2.2 21.0 × 31.0 × 31.5 B32524Q8225+*** 720 B32524 General purpose (wound) Page 19 of 46Please read Important notes at the end of this document.

Ordering codes and packing units (lead spacing 37.5 mm) VR V DC VRMS f ≤60 Hz V AC CR µF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% A = 15 ... +5% (220 µF type only) 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 63 40 22 12.0 × 22.0 × 41.5 B32526R0226+* 1620 33 12.0 × 22.0 × 41.5 B32526R0336+* 1620 47 12.0 × 22.0 × 41.5 B32526R0476+* 1620 68 16.0 × 28.5 × 41.5 B32526R0686+* 800 100 18.0 × 32.5 × 41.5 B32526R0107+* 720 150 20.0 × 39.5 × 41.5 B32526R0157+* 640 220 28.0 × 42.5 × 41.5 B32526R0227A* 440 100 63 15 12.0 × 22.0 × 41.5 B32526R1156+* 1620 22 12.0 × 22.0 × 41.5 B32526R1226+* 1620 33 14.0 × 25.0 × 41.5 B32526R1336+* 1380 47 16.0 × 28.5 × 41.5 B32526R1476+* 800 68 18.0 × 32.5 × 41.5 B32526R1686+* 720 100 20.0 × 39.5 × 41.5 B32526R1107+* 640 150 28.0 × 42.5 × 41.5 B32526R1157+* 440 250 160 4.7 12.0 × 22.0 × 41.5 B32526R3475+* 1620 6.8 12.0 × 22.0 × 41.5 B32526R3685+* 1620 10 12.0 × 22.0 × 41.5 B32526R3106+* 1620 15 14.0 × 25.0 × 41.5 B32526R3156+* 1380 22 16.0 × 28.5 × 41.5 B32526R3226+* 800 33 20.0 × 39.5 × 41.5 B32526R3336+* 640 47 20.0 × 39.5 × 41.5 B32526R3476+* 640 68 28.0 × 42.5 × 41.5 B32526R3686+* 440 400 200 3.3 12.0 × 22.0 × 41.5 B32526R6335+* 1620 4.7 12.0 × 22.0 × 41.5 B32526R6475+* 1620 6.8 14.0 × 25.0 × 41.5 B32526R6685+* 1380 10 18.0 × 32.5 × 41.5 B32526R6106+* 720 15 20.0 × 39.5 × 41.5 B32526R6156+* 640 22 28.0 × 42.5 × 41.5 B32526R6226+*** 440 B32526 General purpose (wound) Page 20 of 46Please read Important notes at the end of this document.

Operating temperature range Max. operating temperature Top,max +125 °C Upper category temperature Tmax +125 °C Lower category temperature Tmin 55 °C Rated temperature TR +85 °C Dissipation factor tan δ (in 10-3) at CR ≤ 0.1 µF 0.1 µF < CR ≤ 1 µF CR > 1 µF at 20 °C 1 kHz 8 8 10 (upper limit values) 10 kHz 15 15 100 kHz 30 Insulation resistance Rins VR CR ≤ 0.33 µF CR > 0.33 µF or time constant τ = CR Rins ≤ 100 V DC 3750 MΩ 1250 s at 20 °C, rel. humidity ≤ 65% ≥ 250 V DC 7500 MΩ 2500 s (minimum as-delivered values) DC test voltage 1.4 VR, 2 s Category voltage VC TA (°C) DC voltage derating AC voltage derating (continuous operation with VDC TA ≤ 85 VC = VR VC,RMS = VRMS or VAC at f ≤ 60 Hz) 85<TA≤125 VC = VR (165 TA)/80 VC,RMS=VRMS (165 TA)/80 Operating voltage Vop for TA (°C) DC voltage (max. hours) AC voltage (max. hours) short operating periods TA ≤ 100 Vop = 1.25 VC (2000 h) Vop = 1.0 VC,RMS (2000 h) (VDC or VAC at f ≤ 60 Hz) 100<TA≤125 Vop = 1.25 VC (1000 h) Vop = 1.0 VC,RMS (1000 h) Damp heat test 56 days/40 °C/93% relative humidity Limit values after damp Capacitance change ΔC/C ≤ 5% heat test Dissipation factor change Δ tan δ ≤ 5 10-3 (at 1 kHz) Insulation resistance Rins ≥ 50% of minimum or time constant τ = CR Rins as-delivered values Reliability: Failure rate λ 1 fit (≤ 1 10-9/h) at 0.5 VR, 40 °C Service life tSL 200 000 h at 1.0 VR, 85 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability". Failure criteria: Total failure Short circuit or open circuit Failure due to variation Capacitance change ΔC/C > 10% of parameters Dissipation factor tan δ > 2 upper limit value Insulation resistance Rins < 150 MΩ (CR ≤ 0.33 µF) or time constant τ = CR Rins < 50 s (CR > 0.33 µF) B32520 ... B32529 General purpose (stacked/wound) Page 21 of 46Please read Important notes at the end of this document.

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values S = Stacked, W = Wound Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm Technology S S S W S W W W W VR VRMS V DC V AC dV/dt in V/µs 63 40 250 120 50 30 3 1 0.8 100 63 300 150 75 50 5 4 3 1 250 160 400 200 150 100 10 8 5 4 400 200 600 275 175 125 10 8.5 6 450 200 20 630 400 800 20 25 15 12 k0 values S = Stacked, W = Wound Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm Technology S S S W S W W W W VR VRMS V DC V AC k0 in V2/µs 63 40 30000 15000 6300 3800 375 130 100 100 63 60000 30000 15000 10000 850 800 600 200 250 160 200000 100000 75000 50000 5000 4000 2500 2000 400 200 500000 220000 140000 100000 10000 8500 6000 450 200 15000 630 400 1000000 25000 30000 18000 15000 B32520 ... B32529 General purpose (stacked/wound) Page 22 of 46Please read Important notes at the end of this document.

Impedance Z versus frequency f (typical values) B32520 ... B32529 General purpose (stacked/wound) Page 23 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm

50 V DC/32 V AC 63 V DC/40 V AC

100 V DC/63 V AC 250 V DC/160 V AC

General purpose (stacked) Page 24 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 5 mm

400 V DC/200 V AC 630 V DC/400 V AC

General purpose (stacked) Page 25 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm

63 V DC/40 V AC 100 V DC/63 V AC

250 V DC/160 V AC 400 V DC/200 V AC

General purpose (stacked) Page 26 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm General purpose (stacked/wound) Page 27 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm

630 V DC/200 V AC

General purpose (stacked/wound) Page 28 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm General purpose (stacked/wound) Page 29 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm

450 V DC/200 V AC 630 V DC/200 V AC

General purpose (stacked/wound) Page 30 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm General purpose (wound) Page 31 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm General purpose (wound) Page 32 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm General purpose (wound) Page 33 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm

630 V DC/220 V AC

General purpose (wound) Page 34 of 46Please read Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C) For TA >55 °C, please refer to "General technical information", section 3.2.3. Lead spacing 37.5 mm General purpose (wound) Page 35 of 46Please read Important notes at the end of this document.

1 Soldering

1.1 Solderability of leads

The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder

1.2 Resistance to soldering heat

Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) coated uncoated (lead spacing > 10 mm) 260 ±5 °C 10 ±1 s MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) 5 ±1 s MKP MKT (lead spacing ≤ 7.5 mm) uncoated (lead spacing ≤ 10 mm) insulated (B32559) < 4 s recommended soldering profile for MKT uncoated (lead spacing ≤ 10 mm) and insulated (B32559) B32520 ... B32529 General purpose (stacked/wound) Page 36 of 46Please read Important notes at the end of this document.

Immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor body and liquid solder Evaluation criteria: Visual inspection No visible damage ΔC/C0 2% for MKT/MKP/MFP 5% for EMI suppression capacitors tan δ As specified in sectional specification B32520 ... B32529 General purpose (stacked/wound) Page 37 of 46Please read Important notes at the end of this document.

1.3 General notes on soldering

Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate- gory temperature T max. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. For short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: Pre-heating temperature and time Forced cooling immediately after soldering Terminal characteristics: diameter, length, thermal resistance, special configurations (e.g. crimping) Height of capacitor above solder bath Shadowing by neighboring components Additional heating due to heat dissipation by neighboring components Use of solder-resist coatings The overheating associated with some of these factors can usually be reduced by suitable coun- termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. EPCOS recommends the following conditions: Pre-heating with a maximum temperature of 110 °C Temperature inside the capacitor should not exceed the following limits: MKP/MFP 110 °C MKT 160 °C When SMD components are used together with leaded ones, the leaded film capacitors should not pass into the SMD adhesive curing oven. The leaded components should be assembled af- ter the SMD curing step. Leaded film capacitors are not suitable for reflow soldering. Uncoated capacitors For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea- sures are recommended: pre-heating to not more than 110 °C in the preheater phase rapid cooling after soldering B32520 ... B32529 General purpose (stacked/wound) Page 38 of 46Please read Important notes at the end of this document.

2 Cleaning

To determine whether the following solvents, often used to remove flux residues and other sub- stances, are suitable for the capacitors described, refer to the table below: Type Ethanol, isopropanol, n-propanol n-propanol-water mixtures, water with surface tension-reducing tensides (neutral) Solvent from table A (see next page) Solvent from table B (see next page) MKT (uncoated) Suitable Unsuitable In part suitable Unsuitable MKT, MKP, MFP (coated/boxed) Suitable Suitable Even when suitable solvents are used, a reversible change of the electrical characteristics may occur in uncoated capacitors immediately after they are washed. Thus it is always recommended to dry the components (e.g. 4 h at 70 °C) before they are subjected to subsequent electrical test- ing. Table A Manufacturers' designations for trifluoro-trichloro-ethane-based cleaning solvents (selection) Trifluoro-trichloro- ethane Mixtures of trifluoro-trichloro-ethane with ethanol and isopropanol Manufacturer Freon TF Freon TE 35; Freon TP 35; Freon TES Du Pont Frigen 113 TR Frigen 113 TR-E; Frigen 113 TR-P; Frigen TR-E 35 Hoechst Arklone P Arklone A; Arklone L; Arklone K ICI Kaltron 113 MDR Kaltron 113 MDA; Kaltron 113 MDI; Kaltron 113 MDI 35 Kali-Chemie Flugene 113 Flugene 113 E; Flugene 113 IPA Rhone-Progil Table B (worldwide banned substances) Manufacturers' designations for unsuitable cleaning solvents (selection) Mixtures of chlorinated hydrocarbons and ketones with fluorated hydrocarbons Manufacturer Freon TMC; Freon TA; Freon TC Du Pont Arklone E ICI Kaltron 113 MDD; Kaltron 113 MDK Kali-Chemie Flugene 113 CM Rhone-Progil B32520 ... B32529 General purpose (stacked/wound) Page 39 of 46Please read Important notes at the end of this document.

3 Embedding of capacitors in finished assemblies

In many applications, finished circuit assemblies are embedded in plastic resins. In this case, both chemical and thermal influences of the embedding ("potting") and curing processes must be taken into account. Our experience has shown that the following potting materials can be recommended: non-flexible epoxy resins with acid-anhydride hardeners; chemically inert, non-conducting fillers; maximum curing temperature of 100 °C. Caution: Consult us first if you wish to embed uncoated types! B32520 ... B32529 General purpose (stacked/wound) Page 40 of 46Please read Important notes at the end of this document.

Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing. Do not exceed the specified time or temperature limits during soldering. Avoid external energy inputs, such as fire or electricity. Avoid overload of the capacitors. The table below summarizes the safety instructions that must always be observed. A detailed de- scription can be found in the relevant sections of the chapters "General technical information" and "Mounting guidelines". Topic Safety information Reference chapter "General technical information" Storage conditions Make sure that capacitors are stored within the specified range of time, temperature and humidity conditions. 4.5 "Storage conditions" Flammability Avoid external energy, such as fire or electricity (passive flammability), avoid overload of the capacitors (active flammability) and consider the flammability of materials. 5.3 "Flammability" Resistance to vibration Do not exceed the tested ability to withstand vibration. The capacitors are tested to IEC 60068-2-6. EPCOS offers film capacitors specially designed for operation under more severe vibration regimes such as those found in automotive applications. Consult our catalog "Film Capacitors for Automotive Electronics". 5.2 "Resistance to vibration" B32520 ... B32529 General purpose (stacked/wound) Page 41 of 46Please read Important notes at the end of this document.

Topic Safety information Reference chapter "Mounting guidelines" Soldering Do not exceed the specified time or temperature limits during soldering. 1 "Soldering" Cleaning Use only suitable solvents for cleaning capacitors. 2 "Cleaning" Embedding of capacitors in finished assemblies When embedding finished circuit assemblies in plastic resins, chemical and thermal influences must be taken into account. Caution: Consult us first, if you also wish to embed other uncoated component types! 3 "Embedding of capacitors in finished assemblies" B32520 ... B32529 General purpose (stacked/wound) Page 42 of 46Please read Important notes at the end of this document.

α Heat transfer coefficient Wärmeübergangszahl α C Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität A Capacitor surface area Kondensatoroberfläche βC Humidity coefficient of capacitance Feuchtekoeffizient der Kapazität C Capacitance Kapazität CR Rated capacitance Nennkapazität ΔC Absolute capacitance change Absolute Kapazitätsänderung ΔC/C Relative capacitance change (relative deviation of actual value) Relative Kapazitätsänderung (relative Abweichung vom Ist-Wert) ΔC/CR Capacitance tolerance (relative deviation from rated capacitance) Kapazitätstoleranz (relative Abweichung vom Nennwert) dt Time differential Differentielle Zeit Δt Time interval Zeitintervall ΔT Absolute temperature change (self-heating) Absolute Temperaturänderung (Selbsterwärmung) Δtan δ Absolute change of dissipation factor Absolute Änderung des Verlustfaktors ΔV Absolute voltage change Absolute Spannungsänderung dV/dt Time differential of voltage function (rate of voltage rise) Differentielle Spannungsänderung (Spannungsflankensteilheit) ΔV/Δt Voltage change per time interval Spannungsänderung pro Zeitintervall E Activation energy for diffusion Aktivierungsenergie zur Diffusion ESL Self-inductance Eigeninduktivität ESR Equivalent series resistance Ersatz-Serienwiderstand f Frequency Frequenz f1 Frequency limit for reducing permissible AC voltage due to thermal limits Grenzfrequenz für thermisch bedingte Reduzierung der zulässigen Wechselspannung f2 Frequency limit for reducing permissible AC voltage due to current limit Grenzfrequenz für strombedingte Reduzierung der zulässigen Wechselspannung fr Resonant frequency Resonanzfrequenz FD Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur Diffusion FT Derating factor Deratingfaktor i Current (peak) Stromspitze IC Category current (max. continuous current) Kategoriestrom (max. Dauerstrom) B32520 ... B32529 General purpose (stacked/wound) Page 43 of 46Please read Important notes at the end of this document.

IRMS (Sinusoidal) alternating current, root-mean-square value (Sinusförmiger) Wechselstrom iz Capacitance drift Inkonstanz der Kapazität k0 Pulse characteristic Impulskennwert LS Series inductance Serieninduktivität λ Failure rate Ausfallrate λ0 Constant failure rate during useful service life Konstante Ausfallrate in der Nutzungsphase λtest Failure rate, determined by tests Experimentell ermittelte Ausfallrate Pdiss Dissipated power Abgegebene Verlustleistung Pgen Generated power Erzeugte Verlustleistung Q Heat energy Wärmeenergie ρ Density of water vapor in air Dichte von Wasserdampf in Luft R Universal molar constant for gases Allg. Molarkonstante für Gas R Ohmic resistance of discharge circuit Ohmscher Widerstand des Entladekreises Ri Internal resistance Innenwiderstand Rins Insulation resistance Isolationswiderstand RP Parallel resistance Parallelwiderstand RS Series resistance Serienwiderstand S severity (humidity test) Schärfegrad (Feuchtetest) t Time Zeit T Temperature Temperatur τ Time constant Zeitkonstante tan δ Dissipation factor Verlustfaktor tan δD Dielectric component of dissipation factor Dielektrischer Anteil des Verlustfaktors tan δP Parallel component of dissipation factor Parallelanteil des Verlfustfaktors tan δS Series component of dissipation factor Serienanteil des Verlustfaktors TA Ambient temperature Umgebungstemperatur Tmax Upper category temperature Obere Kategorietemperatur Tmin Lower category temperature Untere Kategorietemperatur tOL Operating life at operating temperature and voltage Betriebszeit bei Betriebstemperatur und -spannung Top Operating temperature Beriebstemperatur TR Rated temperature Nenntemperatur Tref Reference temperature Referenztemperatur tSL Reference service life Referenz-Lebensdauer VAC AC voltage Wechselspannung B32520 ... B32529 General purpose (stacked/wound) Page 44 of 46Please read Important notes at the end of this document.

VC Category voltage Kategoriespannung VC,RMS Category AC voltage (Sinusförmige) Kategorie-Wechselspannung VCD Corona-discharge onset voltage Teilentlade-Einsatzspannung Vch Charging voltage Ladespannung VDC DC voltage Gleichspannung VFB Fly-back capacitor voltage Spannung (Flyback) Vi Input voltage Eingangsspannung Vo Output voltage Ausgangssspannung Vop Operating voltage Betriebsspannung Vp Peak pulse voltage Impuls-Spitzenspannung Vpp Peak-to-peak voltage Impedance Spannungshub VR Rated voltage Nennspannung R Amplitude of rated AC voltage Amplitude der Nenn-Wechselspannung VRMS (Sinusoidal) alternating voltage, root-mean-square value (Sinusförmige) Wechselspannung VSC S-correction voltage Spannung bei Anwendung "S-correction" Vsn Snubber capacitor voltage Spannung bei Anwendung "Beschaltung" Z Impedance Scheinwiderstand Lead spacing Rastermaß B32520 ... B32529 General purpose (stacked/wound) Page 45 of 46Please read Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Ma- terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de- tailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "General Terms of Delivery for Products and Services in the Electrical In- dustry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Important notes Page 46 of 46