DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SIDACtor® Protection Thyristors 122 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Battrax® Single Port Positive/Negative - MS-013 (T) 1 (-VREF) 2 (R) 3 6 (Ground) 4 (Ground) 5 (+VREF)

Electrical Characteristics

Description

Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Low Capacitance t Positive and negative ringing compatible t Single-port protect t Gate trgger tracking device Agency Approvals Agency Agency File Number E133083 Schematic Symbol Pinout Designation Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps Capacitance* V min V max mA min mA max A max V max pF min pF max B3104UCLxx B3104UC I±V REF* *œ7* 100 100 2.2 4 30 200 B3164UCLxx B3164UC I±V REF* *œ7* 160 100 2.2 4 30 200 B3204UCLxx B3204UC I±V REF* *œ7* 200 100 2.2 4 30 200 Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level t ITU K.20/21 Basic Level t GR 1089 Inter-building t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 The Single Port Positive/Negative Battrax Series are programmable SIDACtor® devices designed to protect SLICs (Subscriber Line Interface Circuit) from damaging overvoltage transients. This series is designed specifically to protect SLIC devices utilizing positive and negative ringing signals. This one device will protect a single port. Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional - All electrical characteristics shown are defined from Tip (pin 1) to Ground (pin 4 & 6) and Ring (pin 3) to Ground (pin 4 & 6) - V REF Max Value for the negative Battrax is -200 V . - VREF.BY7BMVFGPSUIFQPTJUJWF#BUUSBYJT - XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack). * Off-state capacitance (CO) is measured across pins 1 & 4,6 and 3 & 4,6 at 1 MHz with a 2V bias.

SIDACtor® Protection Thyristors 123 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/μs max C 50 500 400 200 150 200 175 100 200 50 500 Package Symbol Parameter Value Unit Modified MS-013 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 60 °C/W Thermal Considerations IH IT IS IS IDRM VT +V-V VS IH VDRM VREF -VREF VDRM VS IPP IPP IDRM 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C Notes:

1 Current waveform in μs

2 Voltage waveform in μs

  • Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP $ *PP rating assumes VREFFRVBMT - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors 124 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Time T emper at ure TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Part Numbering Part Marking High T emp Voltage Blocking 80% Rated VDRM (VDC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed XXXXXXX XXXXX Part Marking Code (Refer to Electrical Characteristics Table) Date Code B3 xx 4 U C L xx TYPE HOLDING CURRENT PACKAGE TYPE IPP RATING RoHS COMPLIANT CONSTRUCTION VARIABLE PACKING OPTIONS RP: Reel Pack TP: Tube PackB3: Dual (Positive & Negative Battrax SIDACtor) 10: 100 mA 16: 160 mA 20: 200 mA

SIDACtor® Protection Thyristors 125 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Package Type Description Quantity Added Suffix Industry Standard U Modified MS-013 6-pin Tape and Reel Pack 1500 RP EIA-481-D Modified MS-013 6-pin Tube Pack 500 (50 per tube) TP N/A Packing Options T ape and Reel Specification — MS-013 Interior of the Tube .045 (1.14) .165 (4.19) .150 (3.81) 90˚ .525 (13.34) A .225 (5.72) Message Location .310 (7.87) .108 (2.74) .005 20.000 ± .030 (508.00 ± 0.76) .020 ± .005 (0.51 ± 0.13) WALL TYP. .110 (2.79) A Dimensions are in inches (and millimeters) Direction of Feed 0.700 (17 .8) .512 (13.0) Arbor Hole Dia. 12.99 (330) .630 (16.0) Dimensions are in inches (and millimeters) .472 (12.0) .157 (4.0) T ube Pack Specification — MS-013 Dimensions — MS-013 7º TYP E D A B Mold Split Line A 7º TYP 7º TYP Pad Outline 0.065 (1.65) 0.460 (11.68) 0.138 (3.50) 0.059 (1.50) C A F 7º TYP G J H Dimension are in inches (and millimeters). Burr Side MIN Length of Flat 96º Detail AKBSC* Dimensions Inches Millimeters Min Max Min Max A 0.360 0.364 9.14 9.25 B 0.352 0.356 8.94 9.04 C 0.400 0.412 10.16 10.46 D 0.043 0.045 1 .09 1 .13 E 0.047 0.055 1 .19 1 .40 F 0.293 0.297 7 .44 7 .54 G 0.289 0.293 7 .34 7 .44 H 0.089 0.093 2.26 2.36 J 0.041 0.049 1 .04 1 .24 K 0.020 0.51 BSC* 0.133 0.143 3.38 3.63 * BSC = Basic Spacing between Centers