B302P THINKISEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
- Ratings at 25℃ ambient temperature unless otherwise specified
- Single Phase, half wave, 60HZ, resistive or inductive load
- For capacitive load derate current by 20% SYMBOLS B302P UNIT Maximum Repetitive Peak Reverse Voltage V RRM 200 300 400 Volts Maximum RMS Voltage V RMS 140 210 280 Volts Maximum DC Blocking Voltage V DC 200 300 400 Volts Maximum Average Forward Rectified Current, At Tc=105℃ IO 30 Amps Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) IFSM 400 Amps Rating for fusing (t＜8.3ms) I 2t 664 A 2S Maximum instantaneous Forward Voltage at 100A VF 1.10 Volts
5.0 Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage TA=100℃ IR 450 UA Typical Thermal Resistance R θJC 1.0 ℃/W Operating and Storage Temperature Range T J,TSTG (-65 to +175) ℃ Notes: 2. Suffix "N" is for lead Negative.Suffix "P" is for lead Positive. 1. Enough heatsink must be considered in application. /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Low leakage /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Low forward voltage drop /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 High current capability /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 High forward surge current capability /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Technology: Glass Passivation Pellet/Clip Bonding /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Case: Vacuum soldered/Sintered temperature < 260 C /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Polarity: As marked on body. (Note2) /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Lead: Plated lead, solderable per MIL-STD-202E method 208C /rhombus4/rhombus4/rhombus4/rhombus4/rhombus4 Mounting: BLOCK/TO-230/BA/MR package type Mechanical Data: Feature: B302P thru B304P o Unit:mm TO-230/BLOCK/BA/MR Application: /rhombus4 Block Diode/Alternator Diode Case Lead Case Lead Suffix:"P" Positive Suffix:"N" Negative /rhombus4 Stack Silicon Diffused Diode alternative /rhombus4 Special for Car AC Alternator rectifier application Pb Free Plating Product B302P thru B304P
30.0 Ampere Heatsink Block Automotive Rectifier Diodes
© 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/ Page 1/2Rev.04/2014 B303P B304P
RATINGS AND CHARACTERISTIC CURVES B302P thru B304P F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE
1 Cycle
CURRENT,(A) 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tj max AVERAGE FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ()℃ 125100 150 1757550250 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 100 400 200 300 600 500 F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE,(V) 1000 100 1.0 0.1 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 504030200 SQUARE WAVE DC AVERAGE POWER DISSIPATION (W) AVERAGE FORWARD CURRENT, (A) F1G.4 FORWARD ROWER DISSIPATION B302P thru B304P © 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/ Page 2/2Rev.04/2014