B270N04

STB270N04 STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

100% avalanche tested Standard threshold drive

Description

This N-Channel enhancement mode MOSFET is the latest refinement of STMicroelectronic unique “Single Feature Size™“ strip-based process with less critical aligment steps and therefore a remarkable manufacturing reproducibility. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and low gate charge.

Applications

High current, switching application Automotive Internal schematic diagram General features Type VDSS RDS(on) ID PTOT STB270N04-1 40V <2.9mΩ 120A 330W STB270N04 40V <2.5mΩ 160A 330W STP270N04 40V <2.9mΩ 120A 330W 1 2 3 TO-220 D²PAK I²PAK STB270N04 STB270N04-1 - STP270N04 N-CHANNEL 40V - 2.1mΩ - 160A - TO-220 - D2PAK - I2PAK STripFET™ Power MOSFET Order codes Sales Type Marking Package Packaging STB270N04-1 B270N04 I²PAK TUBE STB270N04 B270N04 D²PAK TAPE & REEL STP270N04 P270N04 TO-220 TUBE

STB270N04-1 - STB270N04 - STP270N04 Rev3 Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit TO-220/I²PAK D²PAK VDS Drain-Source Voltage (VGS = 0) V VGS Gate-Source Voltage ± 20 V ID (1) Current limited by package Drain Current (continuous) at TC = 25°C 120 160 A ID (1) Drain Current (continuous) at TC=100°C 120 160 A IDM (2) Pulse width limited by safe operating area Drain Current (pulsed) 480 640 A PTOT Total Dissipation at TC = 25°C 330 W Derating Factor 2.2 W/°C dv/dt(3) ISD ≤120A, di/dt ≤200A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX Peak Diode Recovery voltage slope 3.5 V/ns EAS (4) Starting Tj=25°C, Id =80A, Vdd=32V Single Pulse Avalanche Energy J TJ Tstg Operating Junction Temperature Storage Temperature -55 to 175 Table 2. Thermal data Symbol Parameter Value Unit TO-220/I²PAK D²PAK Rthj-case Thermal resistance junction-case Max 0.45 °C/W Rthj-pcb (1) When mounted on 1inch² FR-4 board, 2 oz Cu. Thermal resistance Junction-pcb Max °C/W Rthj-a Thermal resistance junction-ambient Max 62.5 °C/W Tl Maximum lead temperature for soldering purpose (for 10 sec, 1.6mm from case) 300

STB270N04-1 - STB270N04 - STP270N04

Electrical characteristics

(TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter Test Condictions Min. Typ. Max. Unit V(BR)DSS Drain-Source Breakdown Voltage ID = 250µA, VGS= 0 V IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating, VDS = MaxRating @125°C 100 µA µA IGSS Gate Body Leakage Current (VDS = 0) VGS = ±20V ±200 nA VGS(th) Gate Threshold Voltage VDS= VGS, ID = 250µA V RDS(on) Static Drain-Source On Resistance VGS= 10V, ID= 80A TO-220 I²PAK 2.5 2.9 mΩ D²PAK 2.1 2.5 mΩ Table 4. Dynamic Symbol Parameter Test Condictions Min. Typ. Max. Unit gfs (1) Pulsed: pulse duration=300µs, duty cycle 1.5% Forward Transconductance VDS =15V, ID = 80A 200 S Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS =25V, f=1 MHz, VGS=0 7400 1800 pF pF pF Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD=20V, ID = 160A VGS =10V (see Figure 2) 110 150 nC nC nC

STB270N04-1 - STB270N04 - STP270N04 Rev3 Table 5. Switching times Symbol Parameter Test Condictions Min. Typ. Max. Unit td(on) tr Turn-on Delay Time Rise Time VDD=20 V, ID= 80A, RG=4.7Ω, VGS=10V (see Figure 14) 180 ns ns td(off) tf Turn-off Delay Time Fall Time VDD=20 V, ID= 80A, RG=4.7Ω, VGS=10V (see Figure 14) 110 ns ns Table 6. Source drain diode Symbol Parameter Test Condictions Min Typ. Max Unit ISD Source-drain Current D²PAK 160 A TO-220 I²PAK 120 A ISDM (1) Pulse width limited by safe operating area Source-drain Current (pulsed) D²PAK 640 A TO-220 I²PAK 480 A VSD (2) Pulsed: pulse duration=300µs, duty cycle 1.5% Forward on Voltage ISD=80A, VGS=0 1.5 V trr Qrr IRRM Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD=160A, di/dt = 100A/µs, VDD=32V, Tj=150°C 225 3.2 ns nC A

STB270N04-1 - STB270N04 - STP270N04 Rev3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

STB270N04-1 - STB270N04 - STP270N04 Package mechanical data Rev3 DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 6.20 6.60 0.244 0.256 2.40 2.72 0.094 0.107 L 0.511 0.551 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

STB270N04-1 - STB270N04 - STP270N04 Rev3 DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 4.95 5.15 0.194 0.202 E 10.40 0.393 0.410 L 0.511 0.551 3.50 3.93 0.137 0.154 1.27 1.40 0.050 0.055 TO-262 (I2PAK) MECHANICAL DATA

STB270N04-1 - STB270N04 - STP270N04 Package mechanical data Rev3 TO-247 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 2.49 2.69 0.098 0.106 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 0.315 E 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15.85 0.590 0.625 1.27 1.4 0.050 0.055 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.4 0.015 D2PAK MECHANICAL DATA

STB270N04-1 - STB270N04 - STP270N04 Rev3 Packaging mechanical data TAPE AND REEL SHIPMENT D2PAK FOOTPRINT * on sales type DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. 10.5 10.7 0.413 0.421 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 4.8 5.0 0.189 0.197 3.9 4.1 0.153 0.161 11.9 12.1 0.468 0.476 1.9 2.1 0.075 0.082 R 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA

STB270N04-1 - STB270N04 - STP270N04

Revision history

Table 7. Document revision history Date Revision Changes 07-Oct-2005 Initial release. 10-Nov-2005 Preliminary version 09-Feb-2006 Complete datasheet

STB270N04-1 - STB270N04 - STP270N04 Rev3 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America