MBRB20100CT_09 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Package Designed for Power Surface Mount Applications
  • Center−T ap Configuration
  • Guardring for Stress Protection
  • Low Forward V oltage
  • 175°C Operating Junction Temperature
  • Epoxy Meets UL 94 V−0 @ 0.125 in
  • Short Heat Sink Tab Manufactured − Not Sheared!
  • Similar in Size to Industry Standard TO−220 Package
  • Pb−Free Packages are Available Mechanical Characteristics
  • Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
  • Weight: 1.4 Grams (Approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
  • Device Meets MSL1 Requirements
  • ESD Ratings: Machine Model, C >400 V Human Body Model, 3B >8000 V MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 V Average Rectified Forward Current (Rated VR, TC = 110°C) Total Device IF(AV) 10 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 100°C) IFRM 20 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current IRRM 0.5 A Storage Temperature Range Tstg −65 to +175 °C Operating Junction Temperature (Note 1) TJ −65 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V//C0109s Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP D/dTJ < 1/R/C0113JA. D2PAK CASE 418B STYLE 3 SCHOTTKY BARRIER RECTIFIER

20 AMPERES

100 VOLTS

http://onsemi.com AY WW B20100G AKA See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

A = Assembly Location Y = Year WW = Work Week B20100 = Device Code G = Pb −Free Package AKA = Diode Polarity

http://onsemi.com THERMAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Thermal Resistance, Junction −to−Case Junction−to−Ambient (Note 2) R/C0113JC R/C0113JA 2.0 °C/W ELECTRICAL CHARACTERISTICS (Per Leg) Maximum Instantaneous Forward Voltage (Note 3) (i F = 10 Amp, TC = 125°C) (iF = 10 Amp, TC = 25°C) (iF = 20 Amp, TC = 125°C) (iF = 20 Amp, TC = 25°C) vF 0.75 0.85 0.85 0.95 V Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, T J = 125°C) (Rated dc Voltage, TJ = 25°C) iR 6.0 0.1 mA 2. When mounted using minimum recommended pad size on FR −4 board. 3. Pulse Test: Pulse Width = 300 /C0109s, Duty Cycle ≤ 2.0%. Device Package Shipping† MBRB20100CT D2PAK 50 Units / Rail MBRB20100CTG D2PAK (Pb−Free)

50 Units / Rail

MBRB20100CTT4 D2PAK 800 Units / Tape & Reel MBRB20100CTT4G D2PAK (Pb−Free)

800 Units / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Figure 1. Typical Forward Voltage Per Diode Figure 2. Typical Reverse Current Per Diode Figure 3. Typical Current Derating, Case, Per Leg Figure 4. Average Power Dissipation & Average Current

http://onsemi.com PACKAGE DIMENSIONS D2PAK CASE 418B−04 ISSUE K STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE SEATING PLANE S G D −T− M0.13 (0.005) T 231 3 PL K J H V E C A DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.340 0.380 8.64 9.65 B 0.380 0.405 9.65 10.29 C 0.160 0.190 4.06 4.83 D 0.020 0.035 0.51 0.89 E 0.045 0.055 1.14 1.40 G 0.100 BSC 2.54 BSC H 0.080 0.110 2.03 2.79 J 0.018 0.025 0.46 0.64 K 0.090 0.110 2.29 2.79 S 0.575 0.625 14.60 15.88 V 0.045 0.055 1.14 1.40 −B− MB W W NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B −01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. F 0.310 0.350 7.87 8.89 L 0.052 0.072 1.32 1.83 M 0.280 0.320 7.11 8.13 N 0.197 REF 5.00 REF P 0.079 REF 2.00 REF R 0.039 REF 0.99 REF M L F M L F M L F VARIABLE CONFIGURATION ZONE R N P U VIEW W−W VIEW W −W VIEW W −W 12 3 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* 8.38 5.080 DIMENSIONS: MILLIMETERS PITCH 16.155 1.016 10.49 3.504

http://onsemi.com ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. MBRB20100CT/D SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative