B1SEV-GC

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Series B Process Sealed Subminiature Antistatic Toggles www.nkk.comA12 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 50 milliohms maximum Insulation Resistance: 500 megohms minimum @ 500V DC Dielectric Strength: 500V AC minimum for 1 minute minimum Mechanical Life: 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum for locking lever models Electrical Life: 50,000 operations minimum Nominal Operating Force: Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained) Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained) Toggle L: 0.59N Contact Timing: Nonshorting (break-before-make) Angle of Throw: 26° Materials & Finishes Toggle: Nickel plated brass Bushing: Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Gasket: Nitrile butadiene rubber Case Housing: Glass fiber reinforced polyamide Support Bracket: Tin plated phosphor bronze Movable Contact: Phosphor bronze with gold plating Stationary Contacts: Copper alloy with gold plating Terminals: Copper alloy with gold plating Environmental Data Operating Temperature Range: –30°C through +85°C (–22°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: .30 ~ .45Nm (2.65 ~ 3.98 lb•in) for A1 actuator with threaded bushing only PCB Processing Soldering: Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 available The B Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

Series BProcess Sealed Subminiature Antistatic Toggles www.nkk.com A13 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator’s touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Optional threaded, 6mm diameter bushing for panel seal mounting meets IP65 of IEC60529 specifications (similar to NEMA 4 and 13). Totally sealed body construction prevents contact contamination and allows time- and money-saving soldering and cleaning. Epoxy sealed terminals lock out flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Actual Size

Series B Process Sealed Subminiature Antistatic Toggles www.nkk.comA14 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles Cap Colors Paddle Colors A Black A B White B C Red C --- Yellow E --- Green F --- Blue G --- Gray H Poles

1 SPDT

2 DPDT

TYPICAL SWITCH ORDERING EXAMPLE Straight PC Terminals with Bracket DESCRIPTION FOR TYPICAL ORDERING EXAMPLE B12AB A .394” (10.0mm) Bat Toggle Optional Caps G .394” (10.0mm) Bat Lever Cap J .248” (6.3mm) Bat Lever Cap B Toggles A .394” (10.0mm) Bat .315” (8.0mm) Bat with Panel Seal Threaded Bushing (Straight PC only) J .248” (6.3mm) Bat E .394” (10.0mm) Flatted H .248” (6.3mm) Flatted L Locking Lever (with Circuits 2 & 3 only) SPDT ON-NONE-ON Circuit PC Terminals P Straight * B Straight with Bracket * H Right Angle with Bracket * V Vertical with Bracket * Bracketed models are ESD protected Circuits

2 ON NONE ON

3 ON OFF ON

5 ON NONE (ON)

*R (ON) NONE ON 8 (ON) OFF (ON)

9 ON OFF (ON)

*S (ON) OFF ON ( ) = Momentary Reverse circuits R & S available with right angle & vertical only

Series BProcess Sealed Subminiature Antistatic Toggles www.nkk.com A15 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt TOGGLES .394” (10.0mm) Bat A Standard Material & Finish: Brass with Bright Nickel .248” (6.3mm) Bat JA1 .315” (8.0mm) Bat with Panel Seal Threaded Bushing H L.248” (6.3mm) Flatted Locking Lever .394” (10.0mm) FlattedE (2.6) Dia .102 26° (8.0) .315 26° (2.6) Dia .102 (10.0) .394 26° (6.3) .248 (2.6) Dia .102 (2.7) .106 26° (1.6) .063 (10.0) .394 (2.6) .102 26° (6.3) .248 (1.6) .063 26° (4.5) Dia .177 (5.1) Dia .201 (5.8) .228(5.9) .232 (11.5) .453 (12.5) .492 Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Up Center Down Up Center Down Note: Terminal numbers are not actually on the switch. SP B12 B13 B15 B1R B18 B19 B1S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON 2-3 OPEN 2-1 SPDT DP B22 B23 B25 B2R B28 B29 B2S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON 2-3 5-6 OPEN 2-1 5-4 DPDT POLES & CIRCUITS 2 (COM) Slot Slot 46 13 25 (COM)

Series B Process Sealed Subminiature Antistatic Toggles www.nkk.comA16 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles Color Codes: Straight Material: PVC Colors Available: A, B, C Straight with Bracket Material: PVC Colors Available: A, B, C Black White Red Yellow Green Blue A B C E F G P B Right Angle with Bracket Vertical with BracketV OPTIONAL CAPS AT4003 .394” (10.0mm) Bat Lever CapG AT4064 .248” (6.3mm) Bat Lever CapJ GrayH (2.54) Typ .100 (0.6) Dia Typ .024 (3.1) Typ .122 (5.08) .200 (3.1) .122 (0.4) Typ .016 (0.6) Dia Typ .024 (2.54) Typ .100 (10.16) .400 (5.08) .200 (5.08) .200 (0.6) Typ .024 H (0.4) .016 (0.6) .024 (2.54) Typ .100 (0.6) Dia Typ .024 (0.5) Typ .020 (0.4) .016 (0.5) Typ .020 (0.6) .024 (2.54) Typ .100 (2.54) Typ .100(0.6) Dia Typ .024 Use of a support bracket is recommended to increase PCB mounting strength and stability. PC TERMINALS 26° (3.0) Dia .118 (10.0) .394 (11.0) .433 26° (3.0) Dia .118 (6.3) .248 (7.0) .276

Series BProcess Sealed Subminiature Antistatic Toggles www.nkk.com A17 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Single Pole Straight PC Single Pole Straight PC • Bracket Double Pole Straight PC Double Pole Straight PC • Bracket B12AP B22AP B12AB B12AH (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (0.8) Dia Typ .031 (2.54) Typ .100 (5.08) .200 Single Pole Right Angle PC B22AB (6.0) Dia .236 (0.6) Typ .024 (5.08) .200 (2.6) Dia .102 Slot (3.4) .134 (0.4) .016 (3.1) .122 (5.08) .200 (2.7) .106 (13.9) .546 (10.0) .394 3 2 1 (7.3) .287 (8.8) .346 (0.6) Dia Typ .024 (2.54) Typ .100 (6.0) Dia .236 Slot (8.8) .346 (6.0) .236 (2.6) Dia .102 (0.6) Dia Typ .024 (0.4) Typ .016 26° (2.54) Typ .100 (0.8) .031 (2.7) .106 (10.16) .400 (10.0) .394 (13.1) .516 (3.1) .122 (8.8) .346 (5.08) .200 (0.6) Typ .024 CL (8.8) .346 (1.0) .039 (2.6) Dia .102 (0.6) Dia Typ .024 26° (3.5) .138 (0.8) .031 (2.54) Typ .100 (3.1) .122 (13.1) .516 (10.0) .394 (8.8) .346 (5.08) .200 26° (2.6) Dia .102 (0.6) Dia Typ .024 (2.54) Typ .100 (3.1) .122 (13.1) .516 (10.0) .394 (3.5) .138 (0.8) .031 (6.0) Dia .236 Slot (8.8) .346 CL (1.0) .039 (2.54) .100 (0.6) Typ .024 (8.8) .346 (2.6) Dia .102 (0.4) Typ .016 (0.6) Dia Typ .024 26° (10.16) .400 (2.54) Typ .100 (0.8) .031 (2.7) .106 (3.1) .122 (13.1) .516 (10.0) .394 Slot (6.0) Dia .236 (6.0) .236 (8.0) .315 (5.08) .200 (0.8) Dia Typ .031 231 (2.54) Typ .100 5 2 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 2 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (2.54) .100 (6.0) Dia .236 Slot (6.8) .268 TYPICAL SWITCH DIMENSIONS

Series B Process Sealed Subminiature Antistatic Toggles www.nkk.comA18 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles Vertical PC Double Pole Locking Lever • Straight PC • Bracket Double Pole B22AV B22LB Right Angle PC Double Pole Vertical PC Single Pole B22AH B12AV Locking Lever • Straight PC • Bracket Single Pole B12LB Slot (8.85) .348 (6.0) Dia .236 (5.68) .224 (10.16) .400 (0.4) Typ .016 (0.6) Dia Typ .024 (2.54) Typ .100 (5.1) Dia .201 (4.5) Dia .177 26° (3.1) .122 (0.8) .031 (5.8) .228 (5.5) .217 (11.5) .453 (12.5) .492 (15.5) .610 (8.8) .346 (5.08) .200 (0.6) Typ .024 Slot (8.0) .315 (6.0) .236 (10.16) .400 (0.4) Typ .016 (0.6) Dia Typ .024 (2.54) Typ .100 (5.1) Dia .201 (4.5) Dia .177 26° (3.1) .122 (0.8) .031 (5.8) .228 (5.5) .217 (11.5) .453 (12.5) .492 (15.5) .610 CL (0.6) Typ .024 (8.8) .346 (1.0) .039 (2.54) .100 (8.8) .346 (5.08) .200 (0.6) Dia Typ .024 26° (2.6) Dia .102 (2.7) .106 (1.0) .039 (4.4) .173 (0.5) .020 (3.1) .122 (2.54) Typ .100 (5.08) .200 (0.4) .016 (10.0) .394 (18.9) .746 (6.0) Dia .236 Slot (8.8) .346 (0.6) Typ .024 (5.08) .200 (6.0) Dia .236 Slot (0.6) Typ .024 (2.54) .100 (8.0) .315 26° (2.6) Dia .102 (1.0) .039 (4.4) .173 (2.7) .106 (5.08) .200 (0.4) .016 (0.5) .020 (3.1) .122 (2.54) Typ .100 (18.9) .746 (10.0) .394 CL (8.8) .346 (1.0) .039 (0.6) Dia Typ .024 (8.8) .346 (0.6) Dia Typ .024 (2.54) Typ .100 32 1 4 5 6 (2.6) Dia .102 Slot (2.54) .100 (5.08) .200 (0.5) .020 (4.4) .173 (3.1) .122 (0.4) .016 (10.0) .394 (16.4) .646 (2.7) .106 (6.0) Dia .236 (0.6) Typ .024 (5.08) .200 (8.8) .346 (5.08) .200 645 231 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (2.54) .100 (5.08) .200 1 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 (5.08) .200 5 2 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 2 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (2.54) .100 TYPICAL SWITCH DIMENSIONS

Series BProcess Sealed Subminiature Antistatic Toggles www.nkk.com A19 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Panel Seal • Single Pole Threaded Bushing • Straight PC Panel Seal • Double Pole Threaded Bushing • Straight PC B12A1P B22A1P STANDARD HARDWARE & PANEL CUTOUT AT513M Metric Hex Nut Material: Brass, Nickel plated AT063 Gasket Material: Nitrile butadiene rubber (1.3) .051 (6.9) .272 (4.9) .193 (6.2) .244 (8.6) .339 Maximum Panel Thickness with Standard Hardware: .087” (2.2mm) (6.0) .236 (5.0) .197 Slot (6.8) .268 (4.8) .189 (0.6) Dia Typ .024 (2.54) Typ .100 (3.1) .122 (2.6) Dia .102 26° (8.0) .315 (5.5) .217 (0.8) .031 (15.1) .594 M6 P0.75 (1.0) .039 CL (8.8) .346 (2.54) Typ .100 CL (8.8) .346 (0.6) Dia Typ .024 (2.54) Typ .100 (3.1) .122 (2.6) Dia .102 26° (8.0) .315 (5.5) .217 (0.8) .031 (15.1) .594 M6 P0.75 Slot (8.8) .346 (4.8) .189 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (0.8) Dia Typ .031 (2.54) Typ .100 (5.08) .200 (8.0) .315 M6 P0.75 (9.0) .354 (1.5) .059 TYPICAL SWITCH DIMENSIONS