STB13007DT4 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 2.2 Test circuits
  • 3 Package mechanical data
  • 4 Revision history

Part Number Marking Package Packing STB13007DT4 B13007D D2PAK Tape & Reel STB13007DT4 High voltage fast-switching NPN power transistor General features ■ Improved specification: Lower leakage current, Tighter gain range, DC current gain preselection, Tighter storage time range ■ High voltage capability ■ Integrated free-wheeling diode ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed ■ Fully characterized at 125 °C ■ Large RBSOA ■ In compliance with the 2002/93/EC European Directive

Description

The device is manufactured using high voltage Multi-Epitaxial Planar technology for high switching speeds and medium voltage capability. It uses a Cellular Emitter structure to enhance switching speeds.

Applications

■ Electronic transformers for halogen lamps ■ Switch mode power supplies Internal schematic diagram D2PAK (T0-263)

1 Electrical ratings

Table 2. Thermal data Table 1. Absolute maximum rating

2 Electrical characteristics

Table 3. Electrical characteristics

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Derating curve Figure 3. DC current gain Figure 4. DC current gain Figure 5. Collector-emitter saturation Figure 6. Base-emitter saturation

2.2 Test circuits

Figure 11. Inductive load switching test circuit Figure 7. Diode forward voltage Figure 8. Switching times inductive Figure 9. Switching times inductive Figure 10. Reverse biased safe

3 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm inch A 2.20 2.40 0.087 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.398 L2 0.8 0.031 L4 0.60 1.00 0.024 0.039 V2 0 o 8o 0o 0o P032P_B TO-252 (DPAK) MECHANICAL DATA

4 Revision history

Table 4. Revision history 19-Jun-2006 1 Initial release.