DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SIDACtor® Protection Thyristors 118 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Battrax® Series - Single Port Negative - MS-013 2 5 (T) (-VREF) (R) (G) 6 (No Connect) 4 (No Connect)

Electrical Characteristics

The Battrax® series offers programmable SIDACtor® overvoltage protection devices for SLIC applications. The Single Port Negative Battrax Series provides a programmable device that is referenced to a negative voltage souce while internal diodes provide protection from positive surge events.

Description

Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Single-port protection t Gate triggered tracking device t Integrated diodes for positive voltage Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps VF Capacitance* V min V max mA min mA max A max V max V max pF min pF max B1101UCLxx B1101UC I-V REF* *7* I-VREF* *7* 100 100 2.2 4 5 30 200 B1161UCLxx B1161UC I-V REF* *7* I-VREF* *7* 160 100 2.2 4 5 30 200 B1201UCLxx B1201UC I-V REF* *7* I-VREF* *7* 200 100 2.2 4 5 30 200 Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level t ITU K.20/21 Basic Level t GR 1089 Inter-building t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are uni-directional - All electrical characteristics shown are defined from Tip (pin 1) to Ground (pin 5), and Ring (pin 3) to Ground (pin 5) - V REF Max Value for the negative Battrax is -200 V . - XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack). * Off-state capacitance (CO) is measured across pins 1 & 5 and 3 & 5 at 1 MHz with a 2V bias.

SIDACtor® Protection Thyristors 119 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection IH IDRM VDRM VT VS IS IT V IF VREF IPP Pin 1-2: PIN 2 CONNECTED TO GROUND PIN 3 CONNECTED TO VREF Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/μs max C 50 500 400 200 150 200 175 100 200 50 500 Package Symbol Parameter Value Unit Modified MS-013 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 60 °C/W Thermal Considerations 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature PIN 5 CONNECTED TO GROUND PIN 2 CONNECTED TO VREF -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C Notes:

1 Current waveform in μs

2 Voltage waveform in μs

  • Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP $ *PP rating assumes VREFFRVBMT - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors 120 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Part Numbering B1 xx 1 U C L xx TYPE HOLDING CURRENT PACKAGE TYPE IPP RATING RoHS COMPLIANT CONSTRUCTION VARIABLE PACKING OPTIONS RP: Reel Pack TP: Tube PackB1: Negative Battrax SIDACtor 10: 100 mA 16: 160 mA 20: 200 mA Physical Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Environmental Specifications Part Marking High T emp Voltage Blocking 80% Rated VREF Max. (VDC Peak ¡$PS PSIST.*-45% .FUIPE 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed XXXXXXX XXXXX Part Marking Code (Refer to Electrical Characteristics Table) Date Code

SIDACtor® Protection Thyristors 121 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Package Type Description Quantity Added Suffix Industry Standard U Modified MS-013 6-pin Tape and Reel Pack 1500 RP EIA-481-D Modified MS-013 6-pin Tube Pack 500 (50 per tube) TP N/A Packing Options T ape and Reel Specification — MS-013 Interior of the Tube .045 (1.14) .165 (4.19) .150 (3.81) 90˚ .525 (13.34) A .225 (5.72) Message Location .310 (7.87) .108 (2.74) .005 20.000 ± .030 (508.00 ± 0.76) .020 ± .005 (0.51 ± 0.13) WALL TYP. .110 (2.79) A Dimensions are in inches (and millimeters) Direction of Feed 0.700 (17 .8) .512 (13.0) Arbor Hole Dia. 12.99 (330) .630 (16.0) Dimensions are in inches (and millimeters) .472 (12.0) .157 (4.0) T ube Pack Specification — MS-013 Dimensions — MS-013 7º TYP E D A B Mold Split Line A 7º TYP 7º TYP Pad Outline 0.065 (1.65) 0.460 (11.68) 0.138 (3.50) 0.059 (1.50) C A F 7º TYP G J H Dimension are in inches (and millimeters). Burr Side MIN Length of Flat 96º Detail AKBSC* Dimensions Inches Millimeters Min Max Min Max A 0.360 0.364 9.14 9.25 B 0.352 0.356 8.94 9.04 C 0.400 0.412 10.16 10.46 D 0.043 0.045 1 .09 1 .13 E 0.047 0.055 1 .19 1 .40 F 0.293 0.297 7 .44 7 .54 G 0.289 0.293 7 .34 7 .44 H 0.089 0.093 2.26 2.36 J 0.041 0.049 1 .04 1 .24 K 0.020 0.51 BSC* 0.133 0.143 3.38 3.63 * BSC = Basic Spacing between Centers