B1100C_L LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
www.littelfuse.com 3 - 74 © 2006 Littelfuse • Telecom Design Guide Battrax® SLIC Protector The Battrax SLIC protector is offered in a negative Battrax version and a positive Battrax version. The B1xx0C_ is for a -VREF and the B2050C_ is for a +VREF. Designed using an SCR and a gate diode, the B1xx0C_ Battrax begins to conduct at |-VREF| + |-1.2 V| while the B2050C_ Battrax begins to conduct at |+VREF|+| 1 . 2V | . * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For individual “CA” and “CC” surge ratings, see table below. General Notes:
- All measurements are made at an ambient temperature of 25 °C. I PP applies to -40 °C through +85 °C temperature range.
- I PP is a repetitive surge rating and is guaranteed for the life of the product.
- I PP ratings assume VREF = ±48 V.
- V DRM is measured at IDRM.
- V S is measured at 100 V/µs.
- Positive Battrax information is preliminary data.
- V REF maximum value for the negative Battrax is -200 V.
- V REF maximum value for the positive Battrax is 110 V. * Current waveform in µs ** Voltage waveform in µs Electrical Parameters Part Number * VDRM Volts VS Volts VT Volts IDRM µAmps IGT mAmps IT Amps IH mAmps Part Number * VDRM Volts VS Volts VT Volts IDRM µAmps IGT mAmps IT Amps IH mAmps Surge Ratings in Amps Series IPP ITSM 50 / 60 Hz di/dt 0.2x310 * 0.5x700 ** 2x10 * 2x10 ** 8x20 * 1.2x50 ** 10x160 * 10x160 ** 10x560 * 10x560 ** 5x320 * 9x720 ** 10x360 * 10x360 ** 10x1000 * 10x1000 ** 5x310 * 10x700 ** Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps/µs A 20 150 150 90 50 75 75 45 75 20 500 C 50 500 400 200 150 200 175 100 200 50 500 Pin 3 (-VREF) Pin 1 (Line) Pin 2 (Ground) Gate Negative Battrax B1xx0C_ Pin 3 (+VREF) Pin 2 (Ground) Pin 1 (Line) Positive Battrax B2050C_
Battrax® SLIC Protector Telecom Design Guide • © 2006 Littelfuse 3 - 75 www.littelfuse.com SIDACtor Devices Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Thermal Considerations Package Symbol Parameter Value Unit Modified DO-214AA T J Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C RθJA Thermal Resistance: Junction to Ambient 85 °C/W Capacitance Values Part Number pF MIN MAX B1100CAL 50 200 B1100CCL 50 200 B1160CAL 50 200 B1160CCL 50 200 B1200CAL 50 200 B1200CCL 50 200 B2050CAL 50 200 B2050CCL 50 200 Pin 3 (VREF) Pin 1 (Line) Pin 2 (Ground)
www.littelfuse.com 3 - 76 © 2006 Littelfuse • Telecom Design Guide Battrax® SLIC Protector IH IDRM VDRM VT VS IGT IT V-I Characteristics for Negative Battrax IH IDRM VDRMVT VS IGT IT V-I Characteristics for Positive Battrax -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – ˚C Percent of VS Change – % 25 ˚C Normalized VS Change versus Junction Temperature 0.4 -40 -20 0 20 40 60 80 100 120 140 160 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Case Temperature (TC) – ˚C Ratio of IH IH (TC = 25 ˚C) 25 ˚C Normalized DC Holding Current versus Case Temperature