B1100CARPTR | DigiCamel IC Datasheet

Online Datasheet

Read B1100CARPTR online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 4

Technical content

SIDACtor® Protection Thyristors 114 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Battrax® Series Positive/Negative - Modiﬁed DO-214

Electrical Characteristics

The Battrax® series offers programmable SIDACtor® overvoltage protection devices for SLIC applications. This series is offered in a negative Battrax version and a positive Battrax version. The B1xx0C_ is for a -V REF supply BOEUIF#$@JTGPSB 7REF supply. Designed using an SCR and a gate diode, the B1xx0C_ Battrax begins to conduct at |-V REF] ]7]XIJMFUIF#$@#BUUSBY CFHJOTUPDPOEVDUBU] 7REF] ]7]

Description

Features and Beneﬁts t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Robust surge current ratings t Gate triggered tracking devices Agency Approvals Agency Agency File Number E133083 Schematic Symbol Pinout Designation Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps Capacitance* V min V max mA min mA max A max V max pF Min Max B1100CALRP B10A I-V REF* *7* I-VREF* *7* 100 100 2.2 4 30 200 B1160CALRP B16A I-V REF* *7* I-VREF* *7* 160 100 2.2 4 30 200 B1200CALRP B12A I-V REF* *7* I-VREF* *7* 200 100 2.2 4 30 200 B2050CALRP B25A * 7REF* *7* *

7 REF*

*7* 5 50 2.2 4 20 200 B1100CCLRP B10C I-V REF* *7* I-VREF* *7* 100 100 2.2 4 30 200 B1160CCLRP B16C I-V REF* *7* I-VREF* *7* 160 100 2.2 4 30 200 B1200CCLRP B12C I-V REF* *7* I-VREF* *7* 200 100 2.2 4 30 200 B2050CCLRP B25C * 7REF* *7* * *7* 5 50 2.2 4 20 200 PIN 3 (VREF) PIN 1 (Line) PIN 2 (Ground) Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level* t ITU K.20/21 Basic Level t GR 1089 Inter-building* t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 *A-rated parts require series resistance PIN 3 (-VREF) PIN 1 (Line) PIN 2 (Ground) Gate Negative Battrax B1xx0C_ PIN 3 (+VREF) PIN 2 (Ground PIN 1 (Line) Positive Battrax B2050C_ Notes: - Absolute maximum ratings measured at T A= 25ºC (unless otherwise noted). - Devices are uni-directional - All electrical characteristics shown are deﬁned from Tip (pin 1) to Ground (pin 2), and Ring (pin 1) to Ground (pin 2) - V REF Max Value for the negative Battrax is -200 V . - VREF Max Value for the positive Battrax is 110 V . * Off-state capacitance (CO) is measured across pins 1 & 2 at 1 MHz with a 2V bias.

SIDACtor® Protection Thyristors 115 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection 1: Current waveform in μs 2: Voltage waveform in μs Surge RatingsSeries IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A min A min A/μs max A 2 0 1 5 0 1 5 09 0 5 07 57 5 4 5 7 52 0 5 0 0 C 50 500 400 200 150 200 175 100 200 50 500 Package Symbol Parameter Value Unit Modiﬁed DO-214AA PIN 3 (VREF) PIN 1 (Line) PIN 2 (Ground) TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 85 °C/W Thermal Considerations V-I Characteristics - Negative Battrax 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature IH IDRM VDRM VT VS IGT IT IH IDRM VDRMVT VS IGT IT V-I Characteristics - Positive Battrax -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C Notes:

1 Current waveform in μs

2 Voltage waveform in μs

Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP $ *PP rating assumes VREFFRVBMT - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors 116 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td tr x td Pulse Waveform Physical Speciﬁcations Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting ﬂammability classiﬁcation 94V-0 Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Environmental Speciﬁcations High T emp Voltage Blocking 80% Rated VREF Max. (VDC Peak ¡$PS PSIST.*-45% .FUIPE 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reﬂow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reﬂow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed Part MarkingPart Numbering XXXX Part Number Code (Refer to Electrical Characteristics Table) Date CodeXXXXX Bx xx 0 C x L RP TYPE HOLDING CURRENT PACKAGE TYPE IPP RATING RoHS COMPLIANT CONSTRUCTION VARIABLE REEL PACK B1: Negative Battrax SIDACtor B2: Positive Battrax SIDACtor 05: 5 mA 16: 160 mA 10: 100 mA 20: 200 mA

SIDACtor® Protection Thyristors 117 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Speciﬁcations are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Packing Options T ape and Reel Speciﬁcation — Modiﬁed DO-214AA Dimensions — Modiﬁed DO-214AA 0.079 (2.0) 0.040 (1.0) 0.030 (0.76) 0.079 (2.0) 0.079 (2.0) 0.110 (2.8) Pad Outline (MM) H K JE F G A C B M D N P PIN 3 PIN 1 PIN 2 Dimensions are in inches (and millimeters). Package Type Description Quantity Added Sufﬁx Industry Standard C Modiﬁed DO-214AA 3-leaded Tape and Reel Pack 2500 RP EIA-481-D 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.472 (12.0) 0.360 (9.2) 0.315 (8.0) 0.157 (4.0) Pin 2 Pin 1 Pin 3 Dimensions are in inches (and millimeters). Dimensions Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1 .95 2.65 K 0.006 0.016 0.15 0.41 M 0.022 0.028 0.56 0.71 N 0.027 0.033 0.69 0.84 P 0.052 0.058 1 .32 1 .47

Product Information

B1100CARPTR specifications and overview.

Summary

The Battrax짰 series offers programmable SIDACtor짰 overvoltage protection devices

Description

The Battrax® series offers programmable SIDACtor® overvoltage protection devices for SLIC applications.

Source title B1100CARPTR Datasheet(PDF) - Littelfuse

Related Parts

More parts from the same family.

Browse manufacturer