B110-SP-CAT-OD2 TRIPPLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD2 protects indoor and outdoor network equipment from damage caused by power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: Two B110-SP-CAT-OD2 surge protectors are required to protect both source and device. Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD2 meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact), IEC 61000-4-4 (EFT) 3kV (5/50ns) and IEC 61000-4-5 10kA (8/20µs) and 20kV (8/20µs). IP68 Rating Denotes Resistance to Dust and Water The housing’s IP68 rating means the surge protector is not only 100% protected against dust, but also able endure immersion in 1.5 meters of water for up to 60 minutes with no damage or decline in performance. In addition to its water and dust resistance, keeping it safe in storms and other foul weather, the B110-SP-CAT-OD2 is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged. Ready to Use Right from the Package, So You Can Plug and Play Immediately This PoE in-line surge protector meets 802.3af, 802.3bt and 802.3at IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. The passive unit requires no external power. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD2 and the equipment it is protecting should not exceed 328 feet (100 meters). Note: For best performance, the installation’s total cable distance should not exceed 328 feet. Highlights Easy to connect between mid- or end-span PoE source and device using Cat5e/6/6a cabling Dustproof, shockproof and IP68- rated to resist dust and endure immersion in water Supports 802.3af/at/bt IEEE standards and Ethernet data speeds up to 1 Gbps Plug-and-play operation with no external power required for immediate installation Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Applications

Protect an outdoor PoE device, such as a security camera, against damage from electrostatic discharge, cable discharge or power surge Package Includes B110-SP-CAT-OD2 Outdoor PoE Surge Protector Grounding wire, 18 AWG, 1 ft. (0.3 m) (3) Metric cable glands, 8.4 mm diameter (4) Surface mounting screws● (4) Surface screw anchors● (4) Unit cover screws● Owner’s manual●

TAA-Compliant for GSA Schedule Purchases The B110-SP-CAT-OD2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. OVERVIEW UPC Code 037332262806 Product Type In-Line Surge Protector Technology Cat5/5e; Cat6; Cat6a; Cat8 INPUT Input Cord Length (ft.) 0 Right-Angle Plug No Input Cord Length (m) 0.00 OUTPUT Output Receptacles Network Right-Angle Outlets No USER INTERFACE, ALERTS & CONTROLS Diagnostic LED(s) No SURGE / NOISE SUPPRESSION AC Suppression Joule Rating 0 AC Suppression Response Time <0.7 ns AC Suppression Surge Current Rating 10KA (8/20us) Automatic Shut-Off No DATALINE SURGE SUPPRESSION Cable (Coax) Protection No Network (Ethernet) Protection Yes Telephone/DSL Protection No PHYSICAL Color White Material of Construction PC (Plastic) Antimicrobial No

Shipping Dimensions (hwd / cm) 8.31 x 29.39 x 15.01 Shipping Dimensions (hwd / in.) 3.27 x 11.57 x 5.91 Shipping Weight (kg) 0.50 Shipping Weight (lbs.) 1.10 Unit Dimensions (hwd / cm) 8.02 x 12 x 8 Unit Dimensions (hwd / in.) 3.16 x 4.72 x 3.15 Unit Packaging Type Box Unit Weight (kg) 0.40 Unit Weight (lbs.) 0.88 ENVIRONMENTAL Operating Temperature Range 32 to 104 °F (0 to 40 °C) Storage Temperature Range 5 to 122 °F (-15 to 50 °C) Relative Humidity 0 to 85%, Non-Condensing ESD Protection Air - 15kV; Contact - 8kV EFT Protection 3kV (5/50 ns) Lightning Protection 10kA (8/20µs) / 20kV (8/20µs) COMMUNICATIONS Network Compatibility 1 Gbps (Gigabit) IEEE Standards Supported 802.3af; 802.3at; 802.3bt CONNECTIONS Ports 2 PoE Capability 100W (802.3bt) Side A - Connector 1 110 IDC Side B - Connector 1 110 IDC PoE Type Type 1 PoE (15.4W, IEEE 802.3af); Type 2 PoE+ (30W, IEEE 802.3at); Type 3 PoE++/UPoE (60W, IEEE 802.3bt) Power Available at PD 71 W Max. Power Delivered by PSE 90 W FEATURES & SPECIFICATIONS Driver Required No Rotatable Outlets No Recommended Category Cable Cat5e, Cat6, Cat6a, Cat8 Cables DIN Mountable No Integrated/Removable Cable No

© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies Mounting Accessory Included No IP68 Rated Yes Ingress Protection (IP) Rating IP68 STANDARDS & COMPLIANCE Certifications RoHS, REACH, CE, FCC, IP68, ISO9001 Compliance Complies with IEC 61000-4-2 electrostatic Discharge (ESD) standard 15KV (air) / 8KV (contact), IEC 61000-4-4 (EFT) 3KV (5/50ns) and IEC 61000-4-5 (Lightning/Surge) 10KA (8/20s) / 20KV (8/20s) WARRANTY Product Warranty Period (Worldwide) 2-year limited warranty