B1S YEASHIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

http://www.yeashin.com 1 REV.02 20120305 B1S THRU B10S MINI SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 100 to 1000Volts CURRENT 0.5 Amperes

FEATURES

‧Plastic material used carries Underwriters Laboratory recognition 94V-O ‧Low leakage ‧Surge overload rating-- 30 amperes peak ‧Ideal for printed circuit board ‧Exceeds environmental standards of MIL-S-19500 ‧High temperature soldering : 260 O C / 10 seconds at terminals ‧Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANICAL DATA ‧Case: Reliable low cost construction utilizing molded plastic technique results in inexpensive product ‧Terminals: Lead solderable per MIL-STD-202, Method 208. ‧Polarity: Polarity symbols molded or marking on body. ‧Mounting Position: Any. ‧Weight: 0.008 ounce, 0.22 gram. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, Resistive or inductive load. For capacitive load, derate current by 20% PARAMETER SYMBOL B1S B2S B4S B6S B8S B10S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 1000 V Maximum Average Forward Current TA=40℃ TA=25℃(Note 3) IAV 0. 5 0.8* A Peak Forward Surge Current:8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 35 A I2t Rating for fusing (t<8.35ms) I2t 3.735 A2t Maximum Forward Voltage Drop per Bridge Element at 0.5A VF 1.0 V Maximum DC Reverse Current TJ=25℃ at Rated DC Blocking Voltage TJ=125℃ IR 5.0 500 uA Typical Junction capacitance (Note 1) CJ 25 pF Typical thermal resistance per leg (Note2) Rθ A J Rθ L J ℃/W Operating Junction and Storage Temperature Range TJ, TSTG -55 to +150 ℃ NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 3. * R-load on alumina subtrate Ta=25oC .157(4.0) .106(2.7) .275(7.0) .008(0.2) .043(1.1) .106(2.7) .193(4.9) .031(0.8) .142(3.6) .090(2.3) MAX .027(0.7) .090(2.3) .177(4.5) .019(0.5) ~ ~ DI MDI Unit:inch(mm)

http://www.yeashin.com 2 REV.02 20120305 B1S THRU B10S DEVICE CHARACTERISTICS Fig.3 TYPICAL FORWARD CHARACTERISTICS Fig.4 TYPICAL REVERSE CHARACTEISTICS Fig.2 DER ATING CURVE FOR OUTPUT RECTIFIED CURRENT Fig.1 MAXIMUM NON-REPETITIVE SURGE CURRENT NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE, C O INS TANTANEOUS FORWARD VOLTAGE,VO LTS PERCEN TAGE OF PEAK REVERSE VOLTAGE, % AVERAGE FORWARD OUTPUT CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, uA FORWARD SURGE CURRENT, AMPERES pk (HALF-SINE WAVE) 1 2 4 6 8 10 20 40 60 80 100 1.0 0.1 0.01 1.0 1.0 0.1 0.01 0 20 40 60 80 100 120 140 T= C J 125 O T= 2 5C J O 1.00 0.75 0.50 0.25 20 40 60 80 100 120 1 1 45 00