B10PS-VH

VHR-5N JST | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Side entry type with PCB stabilizer 10.5 16.5 10.5 Shrouded header 20.5 10.5 * 7.2 min * 7.2 min Circuit No.1 10.5 16.5 This small, field-proven connector for printed circuit boards is reliable and has a large current carrying capacity. It can be used with a wide variety of signal, power supply, and output circuits that appear in consumer electronic products.

• Proven box contact
• Compact connector with a large capacity
• Secure contact and mounting
• Current rating: 10A AC, DC (AWG #16)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current)
• Contact resistance: Initial value/ 10m Ω max. After environmental testing/ 20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,500V AC/minute
• Applicable wire: AWG #22 to #16
• Applicable PC board thickness: 1.6mm Note: Do not branch in parallel current which exceeds the rated current. If branched in parallel, current imbalance or other problems may develop. If it is absolutely necessary to branch such a large current in parallel, be sure to use contacts made of phosphor bronze. Design the circuits without causing imbalance and provide an extra margin for each circuit. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Locking header Top entry type Note: 1. The above figure is the figure viewed from soldering side. 2. Tolerances are non-cumulative: 0.05mm for all centers. 3. Please consider the pattern layout design in case of applying the large current. 4. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Recognized E60389 Certified LR20812 R75122 Locking header Side entry type Ø 1.65 +0.1 3.96 ± 0.05 3.96 ±0.05 Ø 1.65 +0.1 3.96 ± 0.05 Ø 1.65 +0.1 3.96 ± 0.05 1.5 ±0.05 Ø 1.4 +0.1 0 3.4 ± 0.05 Ø 1.65 +0.1 TSSC021.01(VH) 1

10.6 4.2 3 3.8 Model No. Applicable wire Q'ty / reel mm 2 AWG# Insulation O.D. (mm) Material and Finish Phosphor bronze, tin-plated (reflow treatment) 22~18 0.33~0.83 SVH-21T-P1.1 2 circuits : 2.6 3 to 9 circuits : 4.2 A 7.1 Circuits Model No. Q'ty / bag VHS-2V VHS-3V VHS-5V VHS-7V VHS-8V VHS-9V A 3.70 7.52 15.44 23.36 27.32 31.28 1,000 1,000 1,000 1,000 1,000 1,000 Material Glass-filled PA 66, UL94V-0, natural (ivory) C irc u its Model No. Dimensions (mm) Q'ty / bag A B Material PA 6, UL94V-0, natural (white) N type M type VHR-2N VHR-3N VHR-4N VHR-5N VHR-6N VHR-7N VHR-8N VHR-9N VHR-10N VHR-11N Retainer mountable type VHR-2M VHR-3M VHR-4M VHR-5M VHR-6M VHR-7M VHR-9M 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 39.60 7.86 11.82 15.78 19.74 23.70 27.66 31.62 35.58 39.54 43.50 1,000 1,000 1,000 1,000 500 500 500 500 500 500 13.3 B A 6.2 10.6 Circuit No. 1 14.8 5.7 10.5 B A Circuit No. 1 B A 5.7 10.5 13.3 Circuit No. 1 M type N type Retainer mountable type VH CONNECTOR RoHS compliance Note: 1. Contact JST for brass products. 2. When using retainer mountable type housing, applicable wire's Contact Crimp applicator Dies Applicator C rim p in g m a c h in e SVH-21T-P1.1 SVH-21T-P1.1 SVH-21T-P1.1 SVH-21T-P1.1 AP-K2N MKS-L * M KS -S C MK/SVH-21-11 SC/SVH-21-11 APLMK SVH21-11 APLSC SVH21-11 Contact Crimp applicator Dies Applicator C rim p in g m a c h in e SVH-41T-P1.1 SVH-41T-P1.1 SVH-41T-P1.1 SVH-41T-P1.1 AP-K2N MKS-L MK/SVH-41-11 APLMK SVH41-11 Note: *Strip-crimp applicator Note: 1. Models identified as VHR-( ) M incorporate measures to prevent electric shock and are thus safer in regard to high voltages. 2. The applicable housing for 2 circuits shrouded header is "VHR-2N" only. "VHRR-2N" is not applicable. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. VHR-2N-oo - (blank)…natural (white) BK…black R…red BL…blue M…green D…orange Y…yellow PK…pink H…gray RoHS compliance RoHS compliance Contact Housing Retainer 1.7~3.0 4,500 1.7~3.0 3,500 VHRR-2N VHRR-3N VHRR-5N VHRR-7N VHRR-8N VHRR-9N -2 TSSC021.01(VH) Crimp applicator with dies Crimp applicator with dies

Side entry type with PCB stabilizer 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 1,000 1,000 500 500 250 250 200 200 200 1,000 500 500 250 250 250 200 200 100 7.86 11.82 15.78 19.74 23.70 27.66 31.62 35.58 39.54 B2PS-VH B3PS-VH B4PS-VH B5PS-VH B6PS-VH B7PS-VH B8PS-VH B9PS-VH B10PS-VH B2P-VH B3P-VH B4P-VH B5P-VH B6P-VH B7P-VH B8P-VH B9P-VH B10P-VH Circuits Model No. Dimensions (mm) Q'ty / box A B Top entry type Side entry type Top entry type Side entry type Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66 UL94V-0, natural (white) Material and Finish A B 1.14 14.6 7.7 3.2 8.5 (9.4) Circuit No.1 H JST 1 8 H JST 1 8 A B 14.9 7.7 3.2 8.5 (9.4) 1.14 3.96 Circuit No.1 B (14.6) 7.7 3.2 (9.4) A(1.95) (1.95) 1.14 1.7 8.5 6.8 B (9.4) 4.5 7.7 13.4 3.6 1.14 A Circuit No.1 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 39.60 1,000 1,000 500 500 250 250 200 200 200 200 1,000 500 500 250 250 250 7.86 11.82 15.78 19.74 23.70 27.66 31.62 35.58 39.54 43.50 S2P-VH S3P-VH S4P-VH S5P-VH S6P-VH S7P-VH B2P-VH-B B3P-VH-B B4P-VH-B B5P-VH-B B6P-VH-B B7P-VH-B B8P-VH-B B9P-VH-B B10P-VH-B B11P-VH-B Circuits Model No. Dimensions (mm) Q'ty / box A B Top entry type of PBT Top entry type Side entry type Side entry type with PCB stabilizer Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Top entry type of PBT: Glass-filled PBT, UL94V-0, natural (white) Side entry type with PCB stabilizer: PA 66, UL94V-0, natural (white) Material and Finish RoHS compliance This product displays (LF)(SN) on a label. Note: Headers with a reduced number of posts are also available. Contact JST for details. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2P(S)-VH-oo - (blank)…natural (white) BK…black R…red TR…tomato red BL…blue M…green O…orange Y…yellow PK…pink H…gray RoHS compliance This product displays (LF)(SN) on a label. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. <Top entry type of PBT> ex. B2P-VH-B-oo - (blank)…natural (white) C…black R…red E…blue M…green Y…yellow <Side entry type with PCB stabilizer> ex. S2P-VH-oo - (blank)…natural (white) BK…black R…red BL…blue Y…yellow M…green Locking header TSSC021.01(VH) 3 Circuit No.1

1.5 B A 9.7 3.7 1.14 Circuit No. 1 B 1.5 A 3.96 9.7 3.7 1.14 Circuit No. 1 3.96 7.92 11.88 15.84 19.80 23.76 27.72 31.68 35.64 250 200 150 200 200 100 100 100 125 9.80 13.76 17.72 21.68 25.64 29.60 33.56 37.52 41.48 B2P-VH-FB-B B3P-VH-FB-B B4P-VH-FB-B B5P-VH-FB-B B6P-VH-FB-B B7P-VH-FB-B B8P-VH-FB-B B9P-VH-FB-B B10P-VH-FB-B Circuits Model No. Dimensions (mm) A B Material and Finish Q'ty / box Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PBT, UL94V-0, natural (white) (2 , 3 circuits) (4 to 10 circuits) RoHS compliance This product displays (LF)(SN) on a label. Note: The applicable housing for 2 circuits shrouded header is "VHR-2N" only. "VHRR-2N" is not applicable. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2P-VH-FB-B-oo - (blank)…natural (white) R…red C…black E…blue M…green Y…yellow O…orange H…gray PK…pink Shrouded header VH CONNECTOR Unit for wire-to-wire connection Circuits Model No. Dimensions (mm) A B Q'ty / box B2P-VH-TW B3P-VH-TW B4P-VH-TW B5P-VH-TW B6P-VH-TW B7P-VH-TW 9,000 4,500 4,500 3,600 2,400 2,400 3.96 7.92 11.88 15.84 19.80 23.76 7.86 11.82 15.78 19.74 23.70 27.66 Material and Finish Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA66, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. (0.7) 6.8 8.5 (9.4) 6.2 3.2 8.1 8.1 22.6 1.14 4 TSSC021.01(VH) (1.95) A B 3.96