B0510-2R5224-R EATON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- High specific capacitance
- Very low ESR
- Low leakage currents
- Long cycle life
- UL Recognized
Applications
- Main power
- Hybrid battery packs
- Hold-up power
- Pulse power Pb HALOGEN HFFREE
www.eaton.com/electronics Ratings Capacitance 0.22 F to 2.2 F Maximum working voltage 2.5 V Surge voltage 3.0 V Capacitance tolerance -20% to +80% (+20 °C) Operating temperature range -25 °C to +70 °C Specifications Capacitance (F) Part Number Maximum ESR (Ω) (Equivalent Series Resistance) Measured @ 100 Hz Nominal dimensions (mm) (diameter x length) Typical Mass (grams/piece) 0.22 B0510-2R5224-R 2.0 5 11 0.54 1.0 B0810-2R5105-R 0.50 8 13 1.2 1.5 B1010-2R5155-R 0.30 10 14 1.9 2.2 B0820-2R5225-R 0.20 8 20 1.5 Performance Parameter Capacitance change (% of initial value) ESR (% of max. initial value) Life (1000 hours @ +70 °C @ 2.5 Vdc) ≤ 30% ≤ 300% Storage - Low and High Temperature (1000 hours @ -25 °C and +70 °C) ≤ 30% ≤ 300% Dimensions (mm) Part Number D D’ L L’ F d’ C C’ Tolerances Maximum ±0.5 ±0.02 Minimum Part numbering system B 1010 — 2R5 15 5 -R Family Code Size reference (mm) Voltage (V) R = Decimal Capacitance (μF) Value Multiplier Standard product B Family Diameter = 10 Length = 1 0 2R5 = 2.5 V Example: 155 = 15 x 105 μF or 1.5 F Packaging information
- Standard packaging: Bulk, 100 units per bag
- Larger bulk packages available on request Part marking
- Manufacturer
- Capacitance (F)
- Maximum operating voltage (V)
- Family code (or part number)
- Polarity marking Positive Lead Nominal leakage current (uA) after 72 hours @ +20 °C 2.0 4.0 7.0 9.0 B0510-2R5224-R B0810-2R5105-R B1010-2R5155-R B0820-2R5225-R
Publication No. 4390 BU-SB101087 June 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Technical Data 4390 Effective June 2017 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Lif e support systems are devices which supp ort or sustain life, and whose failure to per form, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122 United States www.eaton.com/electronoics © 2017 Eaton B Supercapacitors Cylindrical cells Wave solder profile Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and soak • Temperature max. (Tsmax) 100 °C 100 °C
- Time max. 60 seconds 60 seconds D preheat to max Temperature 160 °C max. 160 °C max. Peak temperature (TP)* 220 °C – 260 °C 250 °C – 260 °C Time at peak temperature (tp) 10 seconds max 5 seconds max each wave 10 seconds max 5 seconds max each wave Ramp-down rate ~ 2 K/s min ~3.5 K/s typ ~5 K/s max ~ 2 K/s min ~3.5 K/s typ ~5 K/s max Time 25 °C to 25 °C 4 minutes 4 minutes Manual solder +350 °C, 4-5 seconds. (by soldering iron), generally manual, hand soldering is not recommended. Reflow soldering Do not use reflow soldering using infrared or convection oven heating methods. Cleaning/Washing Avoid cleaning of circuit boards, however if the circuit board must be cleaned use static or ultrasonic immersion in a standard circuit board cleaning fluid for no more than 5 minutes and a maximum temperature of +60 °C. Afterwards thoroughly rinse and dry the circuit boards. In general, treat supercapacitors in the same manner you would an aluminum electrolytic capacitor. Temperature Time Tsmin Tsmax Tstyp Tp tp First Wave Second Wave Preheat area Cool down area