B0011E75300A00 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model B0011E75300A00 Rev B Ultra Low Profile 1008 Balun 75Ω to 300Ω Balanced

Description

The B0011E75300A00 is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation analog and digital TV chipsets in an easy to use surface mount package. The B0011E75300A00 is ideal for high volume manufacturing and is higher performanc e than traditional wire wound baluns. The B0011E75300A00 has an unbalanced port impedance of 75 Ω and a 300Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The B0011E75300A00 is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25°C) Parameter Min. Typ. Max Unit Frequency 48 1080 MHz Unbalanced Port Impedance 75 Ω Balanced Port Impedance 300 Ω Return Loss 9 11 dB Insertion Loss* 1.3 1.6 dB Amplitude Balance 0.6 1.5 dB Phase Balance 6 15 Degrees CMRR 28 dB Power Handling TBD Watts Features:

  • 48 – 1080 MHz
  • 1.0 mm Height Profile
  • 75 Ohm to 2 x 150 Ohm
  • DVB-T, DVB-H and DVB-C
  • Low Insertion Loss
  • Surface Mountable
  • Tape & Reel
  • Non-conductive Surface
  • RoHS Compliant Operating Temperature -55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is ap proximately 0.15 dB higher at +85 ºC). All performances stated for recommended operation with external circuitry. Outline Drawing Mechanical Outline Dimensions are in Inches [Millimeters] Top View (Near-side) .106±.005 [2.70±0.13] .079±.005 [2.00±0.13] Side View Bottom View (Far-side) 9X .008 [0.20] 10X .012 [0.30] 2X .008 [0.20] .011 [0.28] .014 [0.34] Orientation Marker Denotes Pin Location .028 [0.70] .036±.003 [0.92±0.07] NC6 8N C Pin Balanced Port 1 Designation Balanced Port 2 NC1 Pin NC3 2 NC Designation Unbalanced Port GND External Capacitor/GND

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model B0011E75300A00 Rev B Typical Performance with Two External 82pF Capacitors (test/specification condition) Port_2 ZO=150Ω [=Zout/2] Port_3 ZO=150Ω [=Zout/2] R=300Ω [Zout] B0011E75300Axx C=82pF Port_1 ZO=75Ω [=Zin] C=82pF Figure 1 The Balun with external capacitors on both low impedance ports (nominal/test configuration). The two capacitors improve the insertion loss and return loss in the 40-200MHz range over that of the basic balun. Frequency (MHz) I nsertion Loss -3.6 -3.3 -2.7 -2.4 -2.1 -1.8 -1.5 -1.2 -0.9 -0.6 -0.3 Frequency (MHz) 100 1000 82pF series capacitors on Pin 4&7 Insertion Loss 48MH z 57MH z 170MH z 870MH z 1080MH z -1.381 -1.108 -0.519 -1.014 -1.343 Frequency (MHz) Amplitude Balance -1.6 -1.2 -0.8 -0.4 0.4 0.8 1.2 1.6 Frequency (MHz) 100 1000 82pF series capacitors on Pin 4&7 Amplitude Balance 48MH z 57MH z 170MH z 870MH z 1080MH z 0.559 0.255 -0.072 -0.483 -0.76 Frequency (MHz) Return Loss -36 -33 -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 100 1000 82pF series capacitors on Pin 4&7 Return Loss 48MH z 57MH z 170MH z 870MH z 1080MH z -18.969 -14.55 -24. 202 -13.605 -11.975 Frequency (MHz) Phase Balance (Delta 180) -20 -16 -12 Frequency (MHz) 100 1000 82pF series capacitors on Pin 4&7 Phase Balance (Delta 180) 48MH z 57MH z 170MH z 870MH z 1080MH z 2.1182.293 1.891 4.712 8.077 Frequency (MHz) Common Mode Rejection -36 -33 -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 100 1000 82pF series capacitors on Pin 4&7 Common Mode Rejection 48MH z 57MH z 170MH z 870MH z 1080MH z -28.613 -32.109 -35. 381 -26.079 -21.614

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model B0011E75300A00 Rev B Typical Performance with One External 82pF Capacitor Port_1 ZO=75Ω [=Zin] Port_2 ZO=150Ω [=Zout/2] Port_3 ZO=150Ω [=Zout/2] R=300Ω [Zout] B0011E75300Axx C=82pF Figure 2 The Balun with an external capacitor on the low impedance ground pin. This improves insertion loss and return loss in the 40-200MHz range over that of the basic configuration. The capacitor value can be changed some to get a slightly different performance. A series capacitor with just pin 4 does NOT produce identical results as the one just in series with pin 7. Frequency (MHz) Insertion Loss -3.6 -3.3 -2.7 -2.4 -2.1 -1.8 -1.5 -1.2 -0.9 -0.6 -0.3 Frequency (MHz) 100 1000 82pF series capacitor on Pin 7 Insertion Loss 48MH z 57MH z 170MH z 870MH z 1080MH z -1.661 -1.232 -0.497 -0.962 -1.308 Frequency (MHz) Amplitude Balance -1.6 -1.2 -0.8 -0.4 0.4 0.8 1.2 1.6 Frequency (MHz) 100 1000 82pF series capacitor on Pin 7 Amplitude Balance 48MH z 57MH z 170MH z 870MH z 1080MH z 0.587 0.283 -0.015 -0.283 -0.614 Frequency (MHz) Return Loss -36 -33 -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 100 1000 82pF series capacitor on Pin 7 Return Loss 48MH z 57MH z 170MH z 870MH z 1080MH z -10.999-11.577 -18.631 -14. 678 -12.417 Frequency (MHz) Phase Balance (Delta 180) -20 -16 -12 Frequency (MHz) 100 1000 82pF series capacitor on Pin 7 Phase Balance (Delta 180) 48MH z 57MH z 170MH z 870MH z 1080MH z 1.9962.147 2.108 3.206 6.305 Frequency (MHz) Common Mode Rejec tion -36 -33 -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 100 1000 82pF series capacitor on Pin 7 Common Mode Rejection 48MH z 57MH z 170MH z 870MH z 1080MH z -28.399 -32.098 -34.696 -29. 797 -23.683

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model B0011E75300A00 Rev B Typical Performance with no External Components Port_1 ZO=75Ω [=Zin] Port_2 ZO=150Ω [=Zout/2] Port_3 ZO=150Ω [=Zout/2] R=300Ω [Zout] B0011E75300Axx Figure 3 The Balun in it’s basic configuration with no external components. Frequency (MHz) Insertion Loss -3.6 -3.3 -2.7 -2.4 -2.1 -1.8 -1.5 -1.2 -0.9 -0.6 -0.3 Frequency (MHz) 100 1000 No External Components Insertion Loss 48MH z 57MH z 170MH z 870MH z 1080MH z -3.115 -2.47 -0.583 -0.974 -1.399 Frequency (MHz) Amplitude Balance -1.6 -1.2 -0.8 -0.4 0.4 0.8 1.2 1.6 Frequency (MHz) 100 1000 No External Components Amplitude Balance 48MH z 57MH z 170MH z 870MH z 1080MH z -0.358 -0.553 Frequency (MHz) Return Loss -36 -33 -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 100 1000 No External Components Return Loss 48MH z 57MH z 170MH z 870MH z 1080MH z -4.145-5.039 -14.713 -14. 226 -11.154 Frequency (MHz) Phase Balance (Delta 180) -20 -16 -12 Frequency (MHz) 100 1000 No External Components Phase Balance (Delta 180) 48MH z 57MH z 170MH z 870MH z 1080MH z 2.5032.253 1.85 2.698 5.796 Frequency (MHz) Common Mode Rejec tion -36 -33 -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 100 1000 No External Components Common Mode Rejection 48MH z 57MH z 170MH z 870MH z 1080MH z -33.006 -33.897 -35.838 -30. 093 -24.469

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model B0011E75300A00 Rev B Distortion Considerations: This balun does NOT contain any ferrite materials and are as such distortion free. Very, very low levels of distortion can arise from dissimilar metals on the contact pads of the part (Cu-Ni-Au) and from inter-metallic contaminations within the part. Power Handling Considerations: The RF-power handling capability of these baluns depends on the temperature at the mounted interface (base plate temperature), and whether or not DC-bias is feed through the part. The power handling specified is for a mounted temperature of 85˚C and no DC-bias and is based on a maximum operating temperature of the part itself of 125˚C (do not exceed this). The maximum power handling relates to the dissipated power within the part and is therefore a function of insertion loss. The insertion loss of this device changes within the specified band. Thus if operated with a narrowband signal at either band edge (this is what is specified) it will have less power handling than if operated closer to the center of the band or if operated with a very wideband signal. If signals arrive at the balun that are out of the specified band, these must be included in the total dissipated power calculation. However the deteriorating return loss will eliminate some of this power. The dissipated RF power can be estimated as; − − 1010 , 101101 dBdB ILRL indissRF PP ][W Where:

  • inP is the input power, either on the low impedance side, single ended or the combined differential power on the balanced side, depending on the feeding direction.
  • dBRL is the return loss in dB associated with the feeding port. I.e. if feed from the balanced side then the balanced return loss must be used (this however is very similar to the single ended return loss).
  • dBIL is the insertion loss at the operating temperature of the device. Below the dissipated power is shown at a normalized 1W input power for the balun internal temperature of 125˚C.

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model B0011E75300A00 Rev B Frequency (MHz) Dissipated Power [W] 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 Frequency (MHz) 100 1000 Dissipated power, normalized to 1W input power, at 125 ˚C Part temperature 48MH z 57MH z 170MH z 870MH z 1080M H z 0.317 0.267 0.171 0.25 0.295 When used with DC-biasing the RF-power must be de-rated with the amount of DC power dissipated; () 22 21, 7|| dcdcoutoutdissdc IIRRP ≈= ][W The total dissipated power cannot exceed TBD. When the duty cycle is not 100% the input power can be averaged, however the instantaneous input power should newer exceed TBD.

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model B0011E75300A00 Rev B Mounting Configuration: In order for Xinger surface mount components to work opti mally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constr ucted from softboard composites whic h possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 19 ppm/oC. An example of the PCB footprint used in the testing of these parts is shown below . In specific designs, the transmission line widths need to be adjusted to the unique di electric coefficients and thicknesses as well as varying pick and place equipment tolerances. Mounting Footprint Dimensions are in Inches [Millimeters] Circuit Pattern Footprint Pad (s) Solder Resist .026 [0.65] .021 [0.54] 10X .014 [0.35] 3X Transmission Line 10X .011 [0.27] .068 [1.73] Component Top View .018[0.46] .026 [0.65] The material used for testing is 8mil Rogers 4003. For a ground plane spacing much larger than this the single via at pin 5 should be replaced with at least 2 via and if possible a coplanar ground.

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model B0011E75300A00 Rev B Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. B ØA ØC REEL DIMENSIONS (inches [mm]) ØA B ØC 0.32 [8.0] 2.0 [50.8] 7.00 [177.8] 4000 QUANTITY/REEL TABLE 1 ØD 0.512 [13.0]ØD

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model B0011E75300A00 Rev B