AW01 HITACHI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
F E A T U R E S O U T L I N E D R A W I N G
- For stabilized power supply.
- Diffused-junction. Glass passivated and encapsulated. ABSOLUTE MAXIMUM RATINGS Items Symbols Units Ratings Permissible Power Dissipation P W 1.0 Operating Junction Temperature T j °C -40 ~ +150 Storage Temperature T stg °C -40 ~ +150 Maximum Permissible Current I ZM mA Refer to characteristics column Non-Repetitive Peak Reverse One- Cycle Dissipation PRSM Wp 80 (2) Mechanical strength : Bending 90°·2 cycles or 180°·1 cycle, Tensile 2kg, Twist 90°·1 cycle. CHARACTERISTICS(T L=25°C) Characteristics Zener Voltage Vz (V) Type Minimum Maximum Maximum Dynamic Impedance Zz (ohm) Test Current Iz (mA) Maximum Permissible Current (TL=100°C) (L=10mm) IZM (mA) Typical Zener Voltage Temperature Coefficient gz(%/°C) AW01-06 5.2 6.8 9 60 160 0.025 AW01-07 6.2 7.9 7 25 135 0.035 AW01-08 7.7 8.7 3 25 120 0.045 AW01-09 8.5 9.6 3 25 105 0.053 AW01-10 9.4 10.6 5 25 95 0.058 AW01-11 10.4 11.6 5 25 85 0.063 AW01-12 11.4 12.7 8 25 75 0.065 AW01-13 12.4 14.1 8 25 70 0.068 AW01-15 13.5 15.6 12 15 65 0.072 AW01-16 15.3 17.1 12 15 60 0.074 AW01-18 16.8 19.1 15 15 52 0.076 AW01-20 18.8 21.2 15 15 48 0.078 AW01-22 20.8 23.3 15 15 43 0.080 AW01-24 22.7 25.6 15 10 40 0.081 AW01-27 25.1 28.9 15 10 35 0.082 AW01-30 28.0 32.0 15 10 32 0.083 AW01-33 31.0 35.0 15 10 30 0.084 Unit in mm(inch) Weight: 0.35 (g) 5MAX (0.2) Direction of polarity Cathode band (Red) 29MIN. (1.14) 62MIN. (2.44) 29MIN. (1.14) (0.14) (0.03) 0.8f
3.5 MAXf
Type mark (Red)
Typical zener characteristics 0 4 8 1 21 62 02 42 83 20 100 120 140 160 180 200 ZENER VOLTAGE (V) ZENER CURRENT (mA) TL=25˚C AW01-06 AW01-07 AW01-08 AW01-09 AW01-10 AW01-11 AW01-12AW01-13 AW01-18 AW01-20 AW01-22 AW01-24 AW01-15AW01-16 AW01-27 AW01-30 AW01-33 Typical dynamic impedance vs. zener current 1 10 100 100 ZENER CURRENT (mA) DYNAMIC IMPEDANCE ( W ) AW01-24 AW01-07 AW01-16 0.3 Max. allowable power dissipation vs. ambient temperature 0 20 40 60 80 100 120 140 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 AMBIENT TEMPERATURE ( ˚C) MAX. ALLOWABLE PWOER DISSIPATION ( W ) PC board (100x180x1.6t) Copper foil ( 5.5) LL Lead length L=10mm 20mm 25mm Max. allowable power dissipation vs. lead temperature 0 20 40 60 80 100 120 140 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 LEAD TEMPERATURE ( ˚C) MAX. ALLOWABLE PWOER DISSIPATION ( W ) Lead temp PC board (100x180x1.6t) Copper foil ( 5.5) LL Lead length L=10mm 20mm 25mmReverse power characteristic (Non-repetitive) 1 10 1000 100 CYCLES REVERSE INSTANTANEOUS PWER DISSIPATION (W) 10ms 1 cycle Reverse instantaneous loss Steady state thermal impedance 01 02 03 0 100 120 140 STEADY STATE THERMAL IMPEDANCE (˚C/W) LEAD LENGTH (mm) Rth(j - a) Rth(j - l) Lead length Lead temp. measured poin (f0.5 thermocouple) PC board (100·180·1.6t) Lead length Copper foil ( 5.5) Ambient temp. measured point
Transient thermal impedance TRANSIENT THERMAL IMPEDANCE (˚C/W) 0.1 200 100 0.001 0.01 0.1 1 10 100 TIME (s) Rth(j - a) Rth(j - l) Lead length = 10 mm Note : PC. board mounted PC. board( 100 · 180 · 1.6t) Copper foil ( 5.5 ) Definition of zener characteristics ˚C150 DVz Vz IAC VAC Iz IF VF 150 DVz:Zener voltage change Vz :Zener voltage (Test current Iz) Iz :Test current Zz :Dynamic impedance=VAC / IAC IF :Forward current VF :Forward voltage drop gz :Zener voltage average temperature coefficients DVz 1 = · ·100 Vz (150-25)
- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are adviced to contact Hitachi sales department for the latest version of this data sheets. 2. Please be sure to read "Precautions for Safe Use and Notices" in the individual brochure before use. 3. In cases where extremely high reliability is required(such as use in nuclear power control, aerospace and aviation, traffic equipment, life-support-related medical equipment, fuel control equipment and various kinds of safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. Or consult Hitachi’s sales department staff. 4. In no event shall Hitachi be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to this data sheets. Hitachi assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in this data sheets. 5. In no event shall Hitachi be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 6. No license is granted by this data sheets under any patents or other rights of any third party or Hitachi, Ltd. 7. This data sheets may not be reproduced or duplicated, in any form, in whole or in part , without the expressed written permission of Hitachi, Ltd. 8. The products (technologies) described in this data sheets are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety not are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. HITACHI POWER SEMICONDUCTORS For inquiries relating to the products, please contact nearest overseas representatives which is located “Inquiry” portion on the top page of a home page. NoticesNoticesNoticesNotices Hitachi power semiconductor home page address http://www.hitachi.co.jp/pse