AVM-273HP

AVM-273HP MINI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CASE STYLE: DG1677-1 Wideband, Microwave, 0.5W Monolithic Amplifier The Big Deal Product Overview Mini-Circuits AVM-273HP+ is a three stage balanced, wideband monolithic amplifier delivering up to 0.5W power and operating over 13 to 26.5 GHz. It is designed using PHEMT technology and is unconditionally stable. Its outstanding isolation enables it to be used as a wideband isolation amplifier or buffer amplifier in a variety of microwave systems including point to point radios, military EW and radar, DBS, and VSAT. Feature Advantages Wideband Wide frequency coverage up to 26.5 GHz supports many microwave applications. Pout up to +27 dBm Can be used as a low-cost driver for high power amplifiers. Excellent active directivity, 43 dB @ 20 GHz (directivity = isolation – gain) Can be used as an inter-stage isolation amplifier, minimizing interaction of adjacent components. Unconditionally stable Eliminates the need for any compensating network to prevent unintended oscillation. Small package Small size for high power with low inductance, repeatable transitions, and excellent ther- mal contact to PCB. AVM-273HP+ Key Features 50Ω 13 to 26.5 GHz

• Wideband 13 to 26.5 GHz
• Output power up to +27dBm
• Excellent directivity, 43 dB typ. @ 20 GHz
• Unconditionally stable
• Excellent gain flatness, ±1 dB
• Sequencing and DC Control module (VCM-1+) is available

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits 13-26.5 GHz CASE STYLE: DG1677-1 AVM-273HP+ Product Features

• Gain, 13 dB typ.
• Output Power, up to +27 dBm typ.
• Excellent directivity, 43 dB typ. at 20 GHz
• Unconditionally Stable
• Aqueous washable; 5 mm x 5 mm SMT package REV. A M149087 AVM-273HP+ TH/RS/CP 161109 General Description The AVM-273HP+ is a three stage balanced wideband monolithic amplifier delivering up to 0.5W power operating over 13 to 26.5 GHz. It is manufactured using PHEMT technology and is unconditionally stable. Its outstanding isolation enables it to be used as a wideband isolation amplifier or buffer amplifier in a variety of microwave systems. Typical Applications
• Point to Point Radio
• Military EW and Radar
• DBS
• VSAT
• Wideband Isolation amplifier +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Wideband, Microwave, 0.5W Monolithic Amplifier Simplified Schematic Notes: H - 90° Hybrid M - Matching Network

Wideband Monolithic Amplifier Page 3 of 7 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits AVM-273HP+ Electrical Specifications (1) at 25°C, Zo=50Ω, (refer to characterization circuit, Fig.1) Parameter Condition (GHz) Min. Typ. Max. Units. Frequency Range 13.0 26.5 GHz DC Voltage (VD1 to VD3 (A)&(B)) 5.0 V DC Voltage (VG1 to VG3 (A)&(B)) -0.8 V DC Current (ID1+ID2+ID3; (A)&(B)) 559 590 mA DC Current (IG1+IG2+IG3; (A)&(B)) 0.5 mA Gain 13.0 — 12.8 dB 14.0 — 12.8 15.0 — 13.0 16.0 — 13.6 17.0 — 14.2 18.0 12.0 15.1 20.0 — 14.7 24.0 — 13.8 26.5 — 13.2 Input Return Loss 13.0 16.9 dB 14.0 17.1 15.0 17.6 16.0 17.0 17.0 19.4 18.0 15.5 20.0 8.9 24.0 9.0 26.5 7.2 Output Return Loss 13.0 8.1 dB 14.0 12.7 15.0 18.9 16.0 19.3 17.0 16.6 18.0 13.2 20.0 8.0 24.0 10.6 26.5 8.8 Directivity (Isolation- Gain) 20.0 43 dB Output Power @ 1 dB compression 13.0 22.6 dBm 14.0 24.3 15.0 25.6 16.0 26.3 17.0 26.4 18.0 26.9 20.0 26.6 24.0 26.5 26.5 25.7 OIP3 13.0 28.7 dBm 14.0 30.6 15.0 32.2 16.0 32.4 17.0 33.2 18.0 32.1 20.0 31.0 24.0 29.7 26.4 29.5 Noise Figure 13.0 9.8 dB 14.0 9.6 15.0 9.3 16.0 8.9 17.0 8.8 18.0 8.4 20.0 8.5 24.0 7.5 26.5 8.5 DC Current Variation vs. Temperature (2) 0.32 mA/°C DC Current Variation vs. Voltage 0.145 mA/mV Thermal Resistance 16.3 °C/W

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Wideband Monolithic Amplifier AVM-273HP+ Simplified Schematic and Pad Description Function Pad Number Description (See Application Circuit) RF-In 4,5 RF Input RF-Out 19,20 RF-Output (DC blocked) VG1 A 31 Gate Voltage of first stage amplifier (Top) VG2 A 29 Gate Voltage of second stage amplifier (Top) VG3 A 27 Gate Voltage of third stage amplifier (Top) VD1 A 30 Drain Voltage of first stage amplifier (Top) VD2 A 28 Drain Voltage of second stage amplifier (Top) VD3 A 26 Drain Voltage of third stage amplifier (Top) Function Pad Number Description (See Application Circuit) VG1 B 10 Gate Voltage of first stage amplifier (Bottom) VG2 B 12 Gate Voltage of second stage amplifier (Bottom) VG3 B 14 Gate Voltage of third stage amplifier (Bottom) VD1 B 11 Drain Voltage of first stage amplifier (Bottom) VD2 B 13 Drain Voltage of second stage amplifier (Bottom) VD3 B 15 Drain Voltage of third stage amplifier (Bottom) 21-25, 32 No Connection, not used internally Notes: H - 90° Hybrid M - Matching Network NOTE: to prevent damage to the AVM-273HP+, and to ensure proper operation, all bias voltages must be applied in the following sequence for both Power On and for Power Off: Power ON 1. Connect all Vg wires together (to ensure all stages are biased simultaneously). 2. Connect all Vd wires together (to ensure all stages are biased simultaneously). 3. Set Vg to -2V, apply Vg 4. Set Vd to +5V, apply Vd 5. Adjust Vg until the desired Idd is reached (the typical Vg is around -0.8V). 6. Apply RF signal. Power OFF 1. Turn OFF RF signal 2. Set Vg to -2.0V 3. Turn OFF Vd (Vd to 0V) 4. Turn OFF Vg (Vg to 0V) ALTERNATELY – VCM-1+ module provide voltage sequencing and DC control automatically. Following these requirements are required for proper operation and are a condi- tion of Mini-Circuits Warranty. Absolute Maximum Ratings(3) Operating Temperature (4) -40°C to 85°C Storage Temperature -65°C to 150°C Channel Temperature 136°C DC Voltage-Drain (Pads 11,13,15,26,28,30 ) @ VG=-0.8V (5) +6 V DC Voltage-Gate (Pads 10,12,14,27,29,31) @ VD=+5V (6) -6 V Power Dissipation 3.1 W DC Current (Pads 11,13,15,26,28,30 ) 620 mA Input Power (CW) 16 dBm DC Voltage on pins 19 & 20 (@VD=5V & VG=-0.8V) +10V Notes: 1. Measured on Mini-Circuits Test Board TB-715-5V. See Characterization Test Circuit (Fig. 1), See cautionary note 2. (Current at 85°C - Current at -45°C)/130 3. Permanent damage may occur if any of these limits are exceeded. These maximum ratings are not intended for continuous normal operation. 4. Defined with reference to ground pad temperature. 5. VG=VG1, VG2, VG3 (A&B) 6. VD= VD1, VD2, VD3 (A&B) Bias Sequence and Conditions

Wideband Monolithic Amplifier Page 5 of 7 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits AVM-273HP+ Fig. 1 Schematic of Test Board TBD (Test & Application) TBD incorporates Current stabilization, automatic voltage sequencing, reverse voltage protection circuitry. Test board used for characterization. (DUT soldered on Mini-Circuits Characterization Test Board TBD) Gain, Output power at 1dB compression (P1dB), Noise Figure, Output IP3 (OIP3) are measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain: Pin=-25 dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output. 3. V+ set to +6.1V to account for 1.1V drop in bias circuit resulting in +5V at drain (VD1 to VD3 (A&B)) 4. V- is set to -5V to realize proper gate voltage (-0.8V typ.) NOTE 1: The voltage sequencing and DC control circuit is available as a self-contained, surface mount module, see page 7 Characterization Test Circuit Product Marking MCL AVM27 black body model family designation index over pin 1 Auto Voltage Sequencing Module VCM-1+ Click Here1

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Wideband Monolithic Amplifier AVM-273HP+ MSL Test Flow Chart Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DG1677-1 (SOT 89) Plastic package, exposed paddle, lead finish: tin-silver over nickel Tape & Reel F68 Standard quantities available on reel 7” reels with 10, 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-401 Evaluation Board TB-715-5V ESD Rating Human Body Model (HBM): Class 1A in accordance with JESD22-A114F Machine Model (MM): Class A (pass 25V) in accordance JESD22-A115 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Wideband Monolithic Amplifier AVM-273HP+ Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Maximum Ratings Operating Temperature -40°C to 85°C Operating Temperature -40°C to 85°C Positve Input Voltage +7.4V Negative Input Voltage -6.0V Total DC 620 mA VCM-1+Sequencing & DC Control Module REV. A M148291 VCM-1+ MM/CP 150408 Surface Mount

Features

• Provides correct voltage sequence and DC control for the PHEMT amplifi er AVM-273HP+
• Replaces over 20 discrete components
• Protection from reverse polarity

Applications

• AVM-273HP+ PHEMT Amplifi er CASE STYLE: BG1482-1 PRICE: Contact Sales Dept. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Electrical Specifi cations at 25°C Parameter Min. Typ. Max. Units Positive Input Voltage +5.9 +6.1 +6.3 V Negative Input Voltage -5.5 -5.0 -4.5 V Positive Output Voltage — +5.0 — V Negative Output Voltage — -0.8 — V Controlled DC from positive line — 560 — mA Sinking DC to the negative line — -0.5 — mA Permanent damage may occur if any of these limits are exceeded. Pad Description NEGATIVE OUTPUT 2 POSITIVE OUTPUT 6 POSITIVE INPUT 9 NEGATIVE INPUT 13 Schematic BOM SEQ Manufacturer P/N Description Manufacturer Q1,Q2 MMBT3906 PNP Transistor Fairchild Semiconductor Q3 MMBT3904 NPN Transistor Fairchild Semiconductor Q4 NTS4101PT1G P-Channel MOSFET ON Semiconductor D1 MMSZ5228BT1G Zener Diode ON Semiconductor D2-D4 MBR0520LT1G Schottky Diode ON Semiconductor C26,C27 GRM1555C1H101GA01D 0402 Capacitor, 100 pF, 2% Murata Electronics C28,C29 GRM188R71C105KA12D 0603 Capacitor, 1µF Murata Electronics R1,R2,R9,R10 RK73H1JTTD1002F 0603 Resistor, 10kΩ KOA Speer R3-R5 RK73H2BTTD3R32F 1206 Resistor, 3.32 Ω KOA Speer R6 RK73H1JTTD1000F 0603 Resistor, 100 Ω KOA Speer R7 RK73H1JTTD1501F 0603 Resistor, 1.5 kΩ KOA Speer R8 RK73H1JTTD1001F 0603 Resistor, 1.0 kΩ KOA Speer R11 RK73Z2BTTD 1206 Resistor, 0 Ω KOA Speer Outline Drawing Outline Dimensions ( )inch mm Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 ABCDE FGH J K LMN PQ wt (Negative Output) 2 (Positive Output) 6 9 (Positive Input) 13 (Negative Input)