AV33 TRIMBLE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Support for GPS L1, GLONASS L1, Galileo E1 and BeiDou B1 Low-profile Fuselage/Bulkhead Mounting Sub-centimeter phase center repeatability Small rugged package ideal for vehicle or man portable applications HIGH PERFORMANCE GNSS SUPPORT The Trimble AV33 GNSS Antenna has been designed to support high accuracy aerial, land and marine applications in one compact design. The rugged 4 hole bulkhead mounting allows the antenna to be used in the most rugged of environments. COMPREHENSIVE GNSS SUPPORT The Trimble AV33 GNSS antenna offers support for present and future L1 GNSS signals, including GPS, GLONASS,Galileo and BeiDou. This ensures that the antenna will operate with your present and most likely future GNSS receivers. ROBUST, LOW-MULTIPATH GPS ANTENNA The antenna resists unwanted signal interference or multipath, which can cause inaccurate measurements. Multipath is caused by signals being reflected from surfaces such as the ground, surrounding trees, or buildings. FLEXIBILITY The antenna is an aviation type of design. The bulkhead mounting ensures only the rugged radome is exposed to the elements. This is an ideal design for customers building machine control systems. The antenna can be mounted flush with the vehicle surface or on the top of a pole mount. The TNC connector is located on the underside of the unit ensuring the attached cable is also protected from the environment. TRIMBLE AV33 Trimble GNSS OEM TRIMBLE AV33 GNSS ANTENNA
Antenna shown with optional bracket. Bracket allows for mounting on single center 5/8 bolt or four perimeter bolts. TRIMBLE AV33 GNSS ANTENNA PERFORMANCE
- L1 Band GNSS Frequency tracking Including: – GPS: L1 – GLONASS: L1 – Galileo: E1 – BeiDou: B1 – SBAS: WAAS, EGNOS, QZSS, Gagan, MSAS
- Quality signal tracking
- TNCF female signal connector
- Small cross-sectional area to reduce wind loading
- Low voltage, low power consumption
- Integral low noise amplifier
- Powered by GNSS receiver via coaxial cable
- High gain for reliable tracking in difficult environments
- 4 recessed bulkhead mounting holes
- Rugged radome designed for machine environments ELECTRICAL Impedance : 50 Ohms VSWR : ≤ 2.0:1 HARDWARE (3.5” diameter, 0.84” height) with aluminum base ENVIRONMENTAL QUALIFICATIONS CONDITIONS DO-160D SECTION STRING CATERGORY
DESCRIPTION
5 A –55 ºC to +85 ºC,
10º/min, 2 cycles Humidity - Method 507.4 MIL-STD-810-F Shock Method 516.5 MIL-STD-818-F Procedure II Vibration Method 516.5C-3 MIL-STD-810-F, Section 514.5 CVII © 2014, Trimble Navigation Limited. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. Maxwell is a trademark of Trimble Navigation Limited. All other trademarks are the property of their respective owners. 11/2014 Specifications subject to change without notice. InTech.trimble.com AMERICAS TRIMBLE NAVIGATION LIMITED Integrated Technologies
510 DeGuigne Drive
Sunnyvale, CA 94085 USA +1-408-481-8000 Phone Email: americasales-intech@trimble.com EUROPE & MIDDLE EAST TRIMBLE NAVIGATION LIMITED Integrated Technologies Germany +49 (6142) 2100-348 Phone France +33 2 28 09 3800 Phone Email: emeasales-intech@trimble.com CHINA TRIMBLE NAVIGATION LIMITED Integrated Technologies Email: chinasales-intech@trimble.com ASIA - PACIFIC TRIMBLE NAVIGATION LIMITED Integrated Technologies Email: asiasales-intech@trimble.com RUSSIA TRIMBLE NAVIGATION LIMITED Integrated Technologies +49 (6142) 2100-348 Phone Email: rusales-intech@trimble.com