AV0830C940

APEM

SWITCH, SPNO RoHS : Compliant

Manufacturer: APEM

Document: 20 Pages / 513Kb

Request Quote Download Datasheet Read online HTML view

Read AV0830C940 online.

AV0830C940 APEM | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 20

Technical content

B-88 APEM www.apem.com AV series Anti-vandal and security pushbutton switches Distinctive features B ❑ Attractive, robust and durable

Irremovable
Anti-jamming construction : reduced travel to prevent insertion of foreign parts
Contact and mechanism protected against crushing
Fire resistant
Long life ❑ Sealed versions ❑ Degree of protection (switches mounted on vertical panels, as shown opposite) : - standard version : IP54 - sealed version : IP65 EXAMPLES OF MOUNTING FOR SEALED VERSIONS Preferred With boot U2187 (sect. H) ➞ O-ring Packaging unit : specified on the following pages. Mounting accessories : Standard and special hardware are presented in section I.

APEM www.apem.com B-89 AV series Anti-vandal and security pushbutton switches Distinctive features B The AV series is a large range of security pushbutton switches including 4 product families : ANTI-VANDAL PUSHBUTTON SWITCHES (page B-90)

Increased impact resistance provided by a nut (Ø 19 mm) or mechanical stop (Ø 22 mm)
Stainless steel actuator and bushing
Bushing dia. 19 (.748) or 22 mm (.866) SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR (page B-93)
Ergonomic actuator dia. 20 (.787) or 30 mm (1.181)
Tactile feedback
Up to 5A 250VAC
Bushing dia. 22 mm (.866) or 24 mm (.944) OTHER SECURITY PUSHBUTTON SWITCHES (page B-96 )
A large variety of actuator shapes, electrical functions, connections, finish and marking options
Bushing dia. 16 (.629), 19 (.748) or 22 mm (.866) SNAP-ACTION SECURITY PUSHBUTTON SWITCHES (page B-104)
Tactile feedback
Illuminated or non-illuminated
Bushing dia. 19 mm (.748)
Models with overmolded actuator

B-90 APEM www.apem.com AV series Anti-vandal pushbutton switches Distinctive features and specifications B SPECIFICATIONS

Max. current/voltage rating with resistive load (C contacts) : 2A 48 VDC
Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
Initial contact resistance : 10 mΩ max. at 1A 2V
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals
Electrical life : 10.000 cycles at full load
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 11 mm (.433) max.
Operating temperature : -30°C to +70°C
Mechanical life : 1.000.000 cycles
Packaging unit : 20 pieces (models Ø 22) or 40 pieces (models Ø 19) MATERIALS
Case : PBT
Contacts : brass, silver plated (C) or silver (A)
Bushing : stainless steel
Actuator : stainless steel CUT-OUTS
Panel cut-out : Ø 19,2 mm (.755) or Ø 22,2 mm (.874)
Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) ROBUSTNESS SEALING ( OPTION T ) Model Ø 19 mm (.748) Model Ø 22 mm (.866) Impacts on actuator according to CECC 96000 Hammer radius 10 mm 0.3 Kg 34 cm 10 strokes Striking energy: 1 joule (1Nm) 10 strokes Striking energy: 5 joules (5Nm) 34 cm 1.5 Kg Degree of protection according to EN 50102, June 95 (NFC 20-015) Hammer radius 25 mm Hammer radius 50 mm IK08 Striking energy: 5 joules (5Nm) 1.7 Kg 29.5 cm IK10 Striking energy: 20 joules (20Nm) 5 Kg 40 cm ❑ Increased impact resistance provided by a nut or mechanical stop ❑ Stainless steel actuator and bushing ❑ UL-CSA approved (long case only) ➀ internal gasket ➁ external gasket Front panel sealing (IP65)

APEM www.apem.com B-91 AV series Anti-vandal pushbutton switches Bushing Ø 19 (.748) - momentary (NO) B NO (function 3) Short case - flat actuator - AV09100...40N Hex nut 22 (.866) across flats 7.30 (.287) 2.00 (.078) (.374) 9.50 6.50 (.255) (.118) 3.00 ø19.00x1.00 SI (.748DIAx1.00 IS) 3.00 (.118) (.866DIA) ø22.00 ø15.00 (.590DIA) (.866DIA) ø22.00 (.196) 5.00 EPOXY2.80x0.5 (.110x.019) 1.20 (.047) 2.80 (.110) Screw terminals AV091003C940N Solder lug / quick-connect term. AV091003C240N ORDER FORMAT Series Bush./act. config. Case style Function Contact material Terminal type Bush./act. material Sealing AV 100 000 C A N T Long case - flat actuator - UL-CSA approved - AV09000...40N Hex nut 22 (.866) across flats 6.50 (.255) (.283) 7.20 (.456) 11.60 (.196) 5.00 2.00 (.078) Ø22.00 (.866DIA) Ø19.00x1.00 SI3.00 Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.748DIAx1.00 IS)(.118) Screw terminals AV090003A940N Curved actuator Screw terminals AV19•003C940N Solder lug / quick-connect terminals AV19•003C240N Flush model Screw terminals AV9D•003C940N Solder lug / quick-connect terminals AV9D•003C240N OTHER CONFIGURATIONS BASIC MODEL (.078) (.590DIA) (.866DIA) 2.00 Ø15.00 Ø22.00 (.141) 3.60 (.866DIA) Ø22.00 (.047) 1.20 (.874DIA Min.) (.755DIA) Ø19.20 Ø22.20 Mini (.051 Min.)

1.30 Mini

To order a sealed product, replace N with T at the end of P/N. Case style : replace • with 1 for short case and 0 for long case. New! Screw terminals for wires 1,5 mm2 max. Screw terminals for wires 1,5 mm2 max.

B-92 APEM www.apem.com AV series Anti-vandal pushbutton switches Bushing Ø 22 (.866) - momentary (NO) B Long case - flat actuator - UL-CSA approved - AV03000...40N Short case - flat actuator - AV03100...40N Hex nut 25 (.984) across flats ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 6.30 (.248)(.500) 12.70 3.00 (.118)(.078) 2.00 ø15.00 (.59DIA) ø25.00 (.984DIA) EPOXY2.80x0.5 (.110x.019) (.110) 2.80 (.287) 7.30 (.047) 1.20 Screw terminals AV031003C940N Solder lug / quick-connect term. AV031003C240N Screw terminals AV030003A940N Hex nut 25 (.984) across flats Ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 10.00 (.248)(.590) 15.00 3.00 (.118)(.078) 2.00 Ø15.00 (.59DIA) Ø25.00 (.984DIA) Curved actuator Screw terminals AV02•003C940N Solder lug / quick-connect term. AV02•003C240N Flatted bushing Flat actuator Screw terminals AVM3•003C940N Curved actuator Screw terminals AVM2•003C940N OTHER CONFIGURATIONS 3.60 (.141) (.078) 2.00 Ø15.00 (.590DIA) Ø25.00 (.984DIA) (.984DIA) Ø25.00 (.590DIA) Ø15.00 (.393 10.00 Ø22.20 (.874DIA) NO (function 3) ORDER FORMAT Series Bush./act. config. Case style Function Contact material Terminal type Bush./act. material Sealing AV 100 000 3 C C A N T BASIC MODEL To order a sealed product, replace N with T at the end of P/N. Case style : replace • with 1 for short case and 0 for long case. New! Screw terminals for wires 1,5 mm2 max. Screw terminals for wires 1,5 mm2 max.

APEM www.apem.com B-93 AV series Security pushbutton switches with large actuator Bushing Ø 22 (.866) - momentary (combined NC/NO) B Combined NC/NO Recessed actuator AV22LC402 Curved actuator AV22LB402 SPECIFICATIONS

Max. current/voltage rating with resistive load : 5A 250VAC
Initial contact resistance : 100 mΩ max.
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
Electrical life : 1.000.000 cycles at 1A 250VAC 50.000 cycles at full load
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 6 mm (.236) max.
Operating temperature : -20°C to +55°C
Mechanical life : 3.000.000 cycles
Front panel sealing : IP65
Packaging unit : 20 pieces (except black chrome plated : 16 pieces) MATERIALS
Case : polyester, glass filled
Contacts : silver/nickel alloy
Bushing : stainless steel (std)
Actuator : stainless steel (std) CUT-OUT
Panel cut-out : Ø 22,2 (.874) or Ø 24,2 (.952)
Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) ORDER FORMAT Series Bushing diameter Bush./act. config. Actuator style Bush./act. matl Contact/ terminals AV 22 P B C See next page. L 40 Flat actuator - solder lug terminals - AV22LP Hex nut 25 (.984) across flats (.118) 3.00 4.00 (.157) 0.50 (.019) (1.023DIA) Ø26.00 (.787DIA) Ø20.00 29.00 (1.142) (.492) 12.50 Ø22.00x1.00 SI (.094) (.055) 1.40 (.866DIAx1.00 IS) 2.40 AV22LP402 BASIC MODEL OTHER CONFIGURATIONS All model numbers below are for switches with standard bushing/actuator material. ➞ O-ring

B-94 APEM www.apem.com AV series Security pushbutton switches with large actuator Bushing Ø 24 (.944) - low profile - momentary (combined NC/NO) B Curved actuator AV24LB402 Recessed actuator AV24LC402 Flat actuator - solder lug terminals - AV24LP Hex nut 27 (1.062) across flats (1.213) Ø20.00 (.787DIA) (1.181DIA) (.051) 1.30 (.157) 4.00 Ø30.00 (.559) 14.20 30.80 (.944DIAx1.00 IS) Ø24.00x1.00 SI 0.50 (.019) 1.40 (.055) (.094) 2.40 AV24LP402 BASIC MODEL OTHER CONFIGURATIONS Models with non-anodized actuator CODE BUSHING ACTUATOR 40 (standard) Stainless steel Stainless steel

20 Chrome plated brass Chrome plated brass

Models with anodized actuator CODE BUSHING ACTUATOR COLOUR 1• Black chrome plated brass 2•C hrome plated brass 4• Stainless steel 2 (standard) NC/NO, solder lug terminals

4 NC/NO, quick-connect terminals

For non-standard material, replace 40 with one of the following codes. ➞ O-ring ø1.40 (.055 DIA) (.110) 2.80 Replace • with one of the following codes : 1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow 6 : red - 6B : maroon

APEM www.apem.com B-95 AV series Mushroom head security pushbutton switches Bushing Ø 22 (.866) - momentary (combined NC/NO) B Combined NC/NO SPECIFICATIONS

Max. current/voltage rating with resistive load : 5A 250VAC
Initial contact resistance : 100 mΩ max.
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
Electrical life : 1.000.000 cycles at 1A 250VAC 50.000 cycles at full load
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 6 mm (.236) max.
Operating temperature : -20°C to +55°C
Mechanical life : 1.000.000 cycles
Front panel sealing : IP65
Packaging unit : 16 pieces MATERIALS
Case : polyester, glass filled
Contacts : silver/nickel alloy
Bushing : brass, nickel plated Actuator : aluminium, anodized CUT-OUT
Panel cut-out : Ø 22,2 (.874)
Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) ORDER FORMAT Series Bushing diameter Bush./act. config. Actuator colour Contact/ terminals AV 22 see below PNA Solder lug terminals - red actuator - AV22PNA Hex nut 25 (.984) across flats (O-ring) ø30.00 10.80 (.425) (1.181DIA) 4.00 (.157) (.866DIAx1.00 IS) (.019) 0.50 ø22.00x1.00 SI (.334)Joint 25.00 (.984) 8.50 (.094) 2.40 (.055) 1.40 AV22PNA62 BASIC MODEL 1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow - 6 : red - 6B : maroon ACTUATOR ANODIZATION COLOUR 2 (standard) NC/NO, solder lug terminals

ø1.40 (.055 DIA) (.110) 2.80

B-96 APEM www.apem.com AV series Security pushbutton switches Bushing Ø 16 (.629) - momentary (NO) B Curved actuator w. chamfer AV0830C900 Curved actuator AV1630C900 3.00 1.50 (.059) (.118) NO (function 3) SPECIFICATIONS

Max. current/voltage rating with resistive load : 200mA 48 VDC - 100mA 48VDC
Initial contact resistance : 50 mΩ max.
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
Electrical life : 50.000 cycles at 200mA 48VDC 100.000 cycles at 100mA 48VDC
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 6 mm (.236) max.
Operating temperature : -30°C to +70°C
Mechanical life : 1.000.000 cycles
Packaging unit : 60 pieces MATERIALS
Case : PBT
Contacts : brass, silver plated (C)
Bushing and actuator : nickel plated brass (std) CUT-OUT
Panel cut-out : Ø 16,2 (.637)
Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) ORDER FORMAT Series Bush./act. config. Function Case style Contact matl. Term. type Bush./act. material See ”options” page. K Sealing AV 3 0 C 9 00 Flat actuator - screw terminals - AV06 Hex nut 19 (.748) across flats (.708DIA) ø18.00 (.374) 9.501.50 (.059) ø12.00 (.472DIA) (.440) 11.20 (.118) 3.00 (.118) 3.00 (.629DIAX1.00 IS) ø16.00X1.00 SI AV0630C900 BASIC MODEL OTHER CONFIGURATIONS (.059) 1.50 (.078) 2.00 All model numbers below are for switches with standard bushing/actuator material, without marking. Screw terminals for wires 1,5 mm2 max.

APEM www.apem.com B-97 AV series Security pushbutton switches Bushing Ø 16 (.629) - latching action B New! Quick-connect terminals Flat actuator Curved actuator AV0611A800 AV1611A800 Straight PC terminals Flat actuator Curved actuator AV0611A400 AV1611A400 5.08 (.200) 0.50 (.019) 1.10 (.043) EPOXY 3.50 (.137) SPECIFICATIONS

Max. current/voltage rating with resistive load :1,5A 250VAC - 1A 24VDC
Initial contact resistance : 50mΩ max.
Insulation resistance : 1 GΩ min. at 500VDC
Dielectric strength : 1.500 Vrms 50 Hz min. between terminals 1 000 Vrms 50 Hz between terminals and frame
Electrical life : 100.000 cycles at 1,5A 250VAC 40.000 cycles at 1A 24VDC
T orque : 5 Nm min. - 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 6 mm (.236) max.
Operating temperature : -30°C to +70°C
Mechanical life : 200.000 cycles
Packaging unit : 25 pieces OFF ON MATERIALS
Case : PA-6T, UL94-V0
Contacts : silver (A) Gold plated silver (AD) on request.
Bushing and actuator : nickel plated brass (std) CUT-OUT
Panel cut-out : Ø 16,2 (.637)
Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) ORDER FORMAT Series Bush./act. config. Function Case style Contact matl. Term. type Bush./act. material See ”options” page. K Sealing AV 1 1 A 00 Solder lug terminals - AV..11A200 Hex nut 19 (.748) across flats Ø12.00 (.472DIA) Ø18.00 (.708DIA) 3.40 (.133) 1.50 (.059) 9.00 (.354) 15.20 (.598) 1.40 (.055) 2.30 (.090) 3.00 (.118) 3.00 (.118) Ø16.00X1.00 SI (.629DIAX1.00 IS) Ø18.00 (.708DIA) Ø12.00 (.472DIA) EPOXY Flat actuator AV0611A200 OFF - ON Curved actuator AV1611A200 OFF - ON BASIC MODEL OTHER CONFIGURATIONS 2.80 (.047) 1.20 (.047) 2.40 (.094) 0.50 (.019) 8.00 (.314)EPOXY All model numbers below are for switches with standard bushing/actuator material, without marking.

B-98 APEM www.apem.com AV series Security pushbutton switches Bushing Ø 19 (.748) - momentary (combined NC/NO) B Solder lug terminals - AV19..007 4213 Ø19.00X1.00 SI (.748DIAX1.00 IS) 12.60 (.496) 3.60 (.141) 13.10 (.515) Ø22.00 (.866DIA) Ø15.00 (.590) 2.00 (.078) 3.60 (.141) 1.50 (.059) 0.50 (.019) 2.00 (.078) Ø15.00 (.590) Ø22.00 (.866DIA) SPECIFICATIONS

Max. current/voltage rating with resistive load : 5A 250VAC - 5A 125VAC - 6.000 cycles 5A 15VDC - 3A 30VDC - 50.000 cycles
Initial contact resistance : 100 mΩ max.
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between term. and frame
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 9 mm (.354) max.
Operating temperature : -20°C to +85°C
Mechanical life : 1.000.000 cycles
Front panel sealing : IP65
Packaging unit : 20 pieces Combined NC/NO 4213 ORDER FORMAT Series Bushing diameter Bush./act. config. Actuator style Bush./act. matl Contact/ terminals AV 19 P B See below L 00 7 MATERIALS
Case : PA 6/6
Contacts : silver
Bushing : nickel pl. brass (std)
Actuator : nickel pl. brass (std) CUT-OUT
Panel cut-out : Ø 19,2 mm (.755)
Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) Hex nut 22 (.866) across flats Flat actuator AV19LP007 Curved actuator AV19LB007 BASIC MODEL All model numbers below are for switches with standard bushing/actuator material. ➞ O-ring CODE BUSHING ACTUATOR 00 (std) Nickel plated brass Nickel plated brass

40 Stainless steel Stainless steel

BUSHING/ACTUATOR MATERIAL For non-standard material, replace 00 with one of the following codes. New!

APEM www.apem.com B-99 AV series Security pushbutton switches Bushing Ø 19 (.748) - momentary (NO) B NO (function 3) Short case - flat actuator - AV09100...00 Hex nut 22 (.866) across flats (.748DIAx1.00 IS) (.531) ø22.00 (.590DIA) (.866DIA) ø15.00 (.078) 2.00 (.216) 5.5013.50 (.196) 5.00 (.118) 3.00 ø19.00x1.00 SI EPOXY 2.80x0.5 (.110x.019) 1.20 (.047) 2.80 (.110) 7.30 (.287) SPECIFICATIONS

Max. current/voltage rating with resistive load (C contacts): 2A 48 VDC
Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
Initial contact resistance : 10 mΩ max. at 1A 2V
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals
Electrical life : 10.000 cycles at full load
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 11 mm (.433) max.
Operating temperature : -30°C to +70°C
Mechanical life : 1.000.000 cycles
Packaging unit : 40 pieces Screw terminals AV091003C900 Solder lug / quick-connect term. AV091003C200 Long case - flat actuator - UL-CSA approved - AV09000...00 (.413) 10.50 (.582) 14.80 (.196) 5.00 2.00 (.078) Ø19.00x1.00 SI3.00 Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.748DIAx1.00 IS)(.118) Screw terminals AV090003A900 MATERIALS
Case : PBT
Contacts : brass, silver plated (C) or silver (A)
Bushing : brass, nickel plated (std)
Actuator : brass, nickel plated (std) CUT-OUT
Panel cut-out : Ø 19,2 mm (.755)
Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) ORDER FORMAT Series Bush./act. config. Case style Function Contact matl. Term. type Bush./act. material See ”options” page. Marking Sealing AV 100 000 3 C KC A BASIC MODEL All model numbers below are for switches with standard bushing/actuator material, without marking. Hex nut 22 (.866) across flats New! Screw terminals for wires 1,5 mm2 max. Screw terminals for wires 1,5 mm2 max.

B-100 APEM www.apem.com AV series Security pushbutton switches Bushing Ø 19 (.748) - momentary (NO) AV series Security pushbutton switches Bushing Ø 19 (.748) - other electrical functions B OTHER CONFIGURATIONS Curved actuator Screw terminals AV19•003C900 Solder lug / quick-connect terminals AV19•003C200 With knurled nut for matrix mounting 25 (.984) x 25 (.984) Flat actuator, screw term. Curved actuator, screw term. AV9P•003C900 AV9B•003C900 Flat actuator, solder lug term. Curved act., solder lug term. AV9P•003C200 AV9B•003C200 Wrench available under P/N U1929. Ø15.00 (.590DIA) Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.177) 4.50 (.866DIA) Ø22.00 25.00 25.00 25.00 (.984)(.984) (.984) 4.50 (.177) (.078) (.590DIA) (.866DIA) 2.00 Ø15.00 Ø22.00 (.141) 3.60 Case style : replace • with 1 for short case and 0 for long case. Bushing Ø 19 (748) - combined NC/NO - AV..9035 (.590DIA) Ø15.00 Ø22.00 Ø15.00 (.866DIA) (.590DIA) Ø19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 3.00 (.118) 15.00 (.590) 7.50 (.295) 5.20 (.204)(.141) 3.60 (.200) 5.08 (.078x.015) 2.00x0.40 (.031) 0.80 (.047) 1.20 Hex nut 22 (.866) across flats

Single pole, solder lug terminals
Gold plated silver contacts
C urrent/voltage rating with resistive load : max. : 1A 30V - min : 10µA 5V Note : a current above 100mA damages the gold plating.
Dielectric strength : 1.000 Vrms between terminals

2.000 Vrms between terminals and frame

Electrical life : 250.000 cycles at full load
Mechanical life : 1.000.000 cycles
Packaging unit : 20 pieces
Further specifications : see previous page. Flat actuator Curved actuator AV099035D200 AV199035D200 Bushing/actuator materials, marking and sealing : see ”options” page.

APEM www.apem.com B-101 AV series Security pushbutton switches Bushing Ø 22 (.866) - momentary (NO) B Short case - flat actuator - AV03100...00 Hex nut 25 (.984) across flats ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 6.30 (.248)(.500) 12.70 3.00 (.118)(.078) 2.00 ø15.00 (.59DIA) ø25.00 (.984DIA) EPOXY2.80x0.5 (.110x.019) (.110) 2.80 (.287) 7.30 (.047) 1.20 Screw terminals AV031003C900 Solder lug / quick-connect term. AV031003C200 Long case - flat actuator - UL-CSA approved - AV03000...00 Hex nut 25 (.984) across flats Ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 10.00 (.248)(.590) 15.00 3.00 (.118)(.078) 2.00 Ø15.00 (.59DIA) Ø25.00 (.984DIA) Screw terminals AV030003A900 NO (function 3) SPECIFICATIONS

Max. current/voltage rating with resistive load (C contacts): 2A 48 VDC
Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
Initial contact resistance : 10 mΩ max. at 1A 2V
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals
Electrical life : 10.000 cycles at full load
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 11 mm (.433) max.
Operating temperature : -30°C to +70°C
Mechanical life : 1.000.000 cycles
Packaging unit : 20 pieces MATERIALS
Case : PBT
Contacts : brass, silver plated (C) or silver (A)
Bushing : brass, nickel plated (std)
Actuator : brass, nickel plated (std) CUT-OUTS
Panel cut-out : Ø 22,2 mm (.874)
Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) ORDER FORMAT Series Bush./act. config. Case style Function Contact matl. Term. type Bush./act. material Marking AV Sealing 100 000 3 C KC A BASIC MODEL All model numbers below are for switches with standard bushing/actuator material, without marking. See ”options” page. New! Screw terminals for wires 1,5 mm2 max. Screw terminals for wires 1,5 mm2 max.

B-102 APEM www.apem.com AV series Security pushbutton switches Bushing Ø 22 (.866) - momentary (NO) AV series Security pushbutton switches Bushing Ø 22 (.866) - other electrical functions B Curved actuator Screw terminals AV02•003C900 Solder lug / quick-connect terminals AV02•003C200 3.60 (.141) (.078) 2.00 Ø15.00 (.590DIA) Ø25.00 (.984DIA) OTHER CONFIGURATIONS Flatted bushing Flat actuator Screw terminals AVM3•003C900 Curved actuator Screw terminals AVM2•003C900 (.984DIA) Ø25.00 (.590DIA) Ø15.00 (.393 10.00 Ø22.20 (.874DIA) Case style : replace • with 1 for short case and 0 for long case. Bushing Ø 22 (.866) - Normally closed (NC) - AV..1200 Bushing Ø 22 (.866) - alternate action - AV..4700

Single pole, screw terminals, without marking
Silver plated copper contacts (C)
Max. current/voltage rating with resistive load : 2A 250VAC - 3A 125VAC - 2,5A 24VDC
Dielectric strength : 2.000 Vrms 50 Hz min. betw. term. and frame 2.000 Vrms. 50 Hz min. between terminals
Electrical life : 100.000 cycles at 0,3A 24VAC or DC 10.000 cycles at full load
Packaging unit : 20 pieces Flat actuator Curved actuator AV031202C00 AV021202C00
Double pole, solder lug/quick-connect term., curved actuator
Silver contacts
Max. current/voltage rating with resistive load : 3(1,5)A 250VAC - 6A 125VAC - 3A 24VAC or DC
Dielectric strength : 3.000 Vrms min. between terminals and frame
Electrical life : 10.000 cycles at full load 50.000 cycles at 1A 24VAC or DC
Mechanical life : 100.000 cycles
Packaging unit : 10 pieces AV044746A200 ON - ON (.984DIA) Ø25.00 Ø15.00 (.59DIA) 7.00 (.275) 15.40 (.606)(.551)(.141) 14.003.60 (.59DIA) Ø15.00 2.00 (.078) (.118) 3.00 Ø22.00x1.00 SI (.866DIAx1.00 IS) (.118DIAx.0.50) Ø3.00x0.50 13.20 (.519) Hex nut 25 (.984) across flats Hex nut 25 (.984) across flats Ø25.00 (.984DIA) (.551)(.141) 14.003.60 (.59DIA) Ø15.00 1.60 (.063) (.118) 3.00 Ø22.00x1.00 SI (.866DIAx1.00 IS) (.811) 20.60 7.20 (.283) 5.80 (.228) 8.40 (.330) 0.50x2.80 (.019x.110) Further specifications : see previous page. Bushing/actuator materials, marking and sealing : see ”options” on next page.

APEM www.apem.com B-103 AV series Security pushbutton switches Options B Flat or curved metal actuator ** Option 80 not available on models with dia. 16 mm (.629) bushing CODE BUSHING ACTUATOR 00 (standard) Nickel plated brass Nickel plated brass

10 Nickel plated brass Stainless steel

12 Nickel plated brass Chrome plated brass

30 Chrome plated brass Stainless steel

80 ** Varnished polished brass Varnished polished brass Flat thermoplastic actuator (not available with dia. 16 mm (.629) bushing) CODE BUSHING ACTUATOR COLOUR 0• (standard) Nickel plated brass 2• Chrome plated brass 8• Varnished polished brass BUSHING/ACTUATOR MATERIAL Replace • with one of the following codes. 1 : blue - 2 : black - 3 : green - 4 : grey 5 : yellow - 6 : red - 7/1: white - 9 : orange For flat or curved actuator. Not available on model AV031202C00. - by engraving on brass actuator (stainless steel on request) - by hot stamping on thermoplastic actuator. COLOUR OF MARKING CODE COLOUR Brass actuator 0 (standard) Same as finish

2 Black

Note : a finished product supplied in version “0” cannot be modified to version "2". Thermoplastic actuator

7 White

X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W

0 Letter O

Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces(0.059) 1.50 (0.314) 8.00 (0.590DIA) Ø15.00 MARKING Select an option from each of the two tables below. For non-standard material, replace 00 with one of the following codes. After selecting basic model number, fill in last 3 boxes with desired options. Series Bush./act. config. Case style Function Contact matl. Term. type Bush./act. material Marking Sealing AV K Front panel sealing (IP65) SEALING ➀ elastomeric membrane ➁ external gasket ➀ internal gasket ➁ external gasket Blank No sealing For types with bushing Ø 19 or Ø 22 K Frontal panel sealing (IP65) For types with bushing Ø 16

B-104 APEM www.apem.com AV series Snap-action security pushbutton switches Bushing Ø 19 (.748) - illuminated or not - momentary (NO) B Flat actuator - illuminated Solder lug terminals AV09C7L3D200 Screw terminals AV09C7L3D900 NO (function 3) SPECIFICATIONS

Max. current/voltage rating with resistive load : 50mA 24VDC
LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA A resistor must be series-connected by the user.**
Initial contact resistance : 100 mΩ max.
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and bushing
Electrical life : 1.000.000 cycles at full load
Operating force : 7 N + / -2N
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 11 mm (.433) max.
Operating temperature : -30°C to +70°C
Soldering : 270°C max. during 3 sec.
Packaging unit : 40 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current Flat actuator - non-illuminated Hex nut 22 (.866) across flats Solder lug terminals AV09C703D200 Screw terminals AV09C703D900 Also available with curved actuator : AV19C703D200 or AV19C703D900 MATERIALS
Case : PBT UL94-V0
Terminals : brass, gold plated
Contacts : gold plated dome
Bushing : brass, nickel plated (std)
Actuator : brass, nickel plated (std)
LED CUT-OUTS
Panel cut-out : Ø 19,2 mm (.755)
Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) (.074) 1.90 (.153) 3.90 (.043) 1.10 Ø19.00x1.00 SI 3.00 Ø22.00 Ø15.00 2.00 13.50 (.866DIA) (.590DIA) (.748DIAx1.00 IS) (.118)(.078) (.531) (.163) 4.15 (.590DIA) (.866DIA) Ø15.00 Ø22.00 EPOXY (.519) 13.2013.50 (.531) (.078) 2.00 (.531) (.078) (.118) (.748DIAx1.00 IS) (.590DIA) (.866DIA) 13.50 2.00 Ø15.00 Ø22.00 3.00 Ø19.00x1.00 SI 1.10 (.043) 3.90 (.153) 4.15 (.163) 1.90 (.074) (.393DIA) Ø10.00 EPOXY (.590DIA) (.866DIA) Ø15.00 Ø22.00 (.078) 2.00 (.519) 13.2013.50 (.531) ORDER FORMAT Series Bush./act. config. Case style Funct.Illum. or not Contact matl. Term. type Bush./act. material MarkingLED colour Seal. AV 00 L C7 3 D 2 K See ”options” on next page. All model numbers below are for switches with standard bushing/actuator material, without marking. Hex nut 22 (.866) across flats + -

APEM www.apem.com B-105 AV series Snap-action security pushbutton switches Options B Non-illuminated models CODE BUSHING ACTUATOR 00 (std) Nickel plated brass Nickel plated brass

80 Varnished polished brass Varnished polished brass

00 (std) Nickel plated brass Nickel plated brass

45 Stainless steel Nickel plated brass

1: Blue - 3 : Green - 5 : Yellow - 6 : Red - 7 : White - 9 : Amber - 2 : Red/green K Front panel sealing (IP65) ➀ internal gasket ➁ external gasket BUSHING/ACTUATOR MATERIAL LED COLOUR For non-standard material, replace 00 with one of the following codes. Series Bush./act. config. Case style Funct.Illum. or not Contact matl. Term. type Bush./act. material MarkingLED colour Seal. AV For flat or curved actuator. - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert ( illuminated actuators) COLOUR OF MARKING CODE COLOUR Non-illuminated actuators 0 (standard) Same as finish Note : a finished product supplied in version “0” cannot be modified to version "2". Illuminated actuators

2 Black (on white)

X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces (0.059) 1.50 (0.314) 8.00 Ø10.00 (0.393DIA) (0.039) 1.00 MARKING Select an option from each of the two tables below. SEALING Blank No sealing After selecting basic model no., fill in last 4 boxes with desired options.

B-106 APEM www.apem.com AV series Snap-action security pushbuttons with overmolded actuator Bushing Ø 19 (.748) - illuminated or not - momentary (NO) B New! SPECIFICATIONS

Max. current/voltage rating with resistive load : 50mA 24VDC
LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA A resistor must be series-connected by the user.**
Initial contact resistance : 100 mΩ max.
Insulation resistance : 1.000 MΩ min. at 500VDC
Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and bushing
Electrical life : 1.000.000 cycles at full load
Operating force : 7 N + / -2N
T orque : 5 Nm min.- 14 Nm max. applied to nut
Panel thickness : 1 (.039) to 11 mm (.433) max.
Operating temperature : -30°C to +70°C
Soldering : 270°C max. during 3 sec.
Packaging unit : 40 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
Case : PBT UL94-V0
Terminals : brass, gold plated
Contacts : gold plated dome
Bushing : brass, nickel plated (std)
Actuator : stainless steel, with thermoplastic overmolding
LED CUT-OUTS
Panel cut-out : Ø 19,2 mm (.755)
Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) NO (function 3) ORDER FORMAT Series Bush./act. config. Illum. or not Contact matl. Term. type Bush. material Actuator style LED colour Seal. AV 9 0 SL D Over- molding K See ”options” on next page. Solder lug terminals Hex nut 22 (.866) across flats (.385) (.078) (.118) (.590DIA) (.866DIA) 9.80 2.00 Ø15.00 Ø22.00 3.00 1.10 (.043) 4.30 (.169) 4.15 (.163) 1.90 (.074) (.393DIA) Ø10.00 EPOXY (.590DIA) (.866DIA) Ø15.00 Ø22.00 (.078) 2.00 Also available with bushing Ø 22 (.866) : on request. Illuminated AV9SLD2 Non illuminated AV9S0D2 Straight PC terminals Hex nut 22 (.866) across flats (.385) (.078) (.118) (.590DIA) (.866DIA) 9.80 2.00 Ø15.00 Ø22.00 3.00 4.30 (.169) 6.00 (.236) (.393DIA) Ø10.00 EPOXY (.590DIA) (.866DIA) Ø15.00 Ø22.00 (.078) 2.00 4.00 (.157) Also available with bushing Ø 22 (.866) : on request. Illuminated AV9SLD4 Non illuminated AV9S0D4

APEM www.apem.com B-107 AV series Snap-action security pushbuttons with overmolded actuator Options B New! CODE MATERIAL 0 (std) Nickel plated brass

2 Chrome plated brass

4 Stainless steel

5 Gold plated brass

6 Chrome plated brass, satin

7 Chrome pl. brass, matt black

8 Varnished polished brass

9 Polished brass

K Front panel sealing (IP65) ➀ internal gasket ➁ external gasket BUSHING MATERIALS CODE COLOUR

1 Blue

3 Green

4 Grey

5 Yellow

6 Red

8 Translucent

9 Orange

2 Red/green

9 Amber

The ring and symbols are obtained by photochemical engraving of a stainless steel insert. The insert is then overmolded in the desired colour. The following actuator styles are available. For other types, consult factory. ACTUATOR STYLES SEALING Blank No sealing After selecting basic model no., fill in last 5 boxes with desired options. CODE 001 002 003 004 005

DESCRIPTION

Series Bush./act. config. Illum. or not Contact matl. Term. type Bush. material Actuator style LED colour Seal. AV Over- molding

Product Information

AV0830C940 specifications and overview.

Summary

SWITCH, SPNO RoHS : Compliant

Description

SWITCH, SPNO RoHS : Compliant

Source title AV0830C940 Datasheet(PDF) - APEM

Related Parts

More parts from the same family.

Browse manufacturer