ATXP6 AME | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
AME, Inc. ATXP6 Rev. A.01 Jumper Free Over Clock Controller ATXP6 is a full feature of over clocking device for Intel© CPU. It integrates all functions that are possible to be utilized for over-clocking purpose. l Provide Six VID Input (VIDIN0-5) and Six VID Output (VIDOUT0-5) Pins l Support Auto-Recover Build-in Watch Dog Timer & Reset Output Signal Pin l Provide Eight GPIO Pins l SM Bus Interface l Provide CPU Changing Detect Pin (SLOTOCC#) l Package: SSOP 28-Pin n General Description n Features
AME, Inc. Jumper Free Over Clock ControllerATXP6 Rev. A.01 n Pin Configuration 3VSB 1 28 Test/ASEL GPIO 3 2 27 GPIO 5 GPIO 4 3 26 GPIO 6 VIDIN0 4 25 GPIO 7 VIDIN1 5 24 VIDOUT 0 VIDIN2 6 23 VIDOUT 1 VIDIN3 7 22 VIDOUT 2 VIDIN4 8 21 VIDOUT 3 VIDIN5 9 20 VIDOUT 4 GPIO 0 10 19 VIDOUT 5 GPIO 1 11 18 VBAT GPIO 2 12 17 SLOTOCC # SDA 13 16 GND SCL 14 15 RSTOUT # A T X P
AME, Inc. ATXP6 Rev. A.01 Jumper Free Over Clock Controller n Pin Description I/O Type Description INtx ---- Special level input. INtx-100k-dn ---- Special level input with 100K ohm pull-down resistor. INt ---- TTL level input. INt-47k-up ---- TTL level input with 47K ohm pull-up resistor. INts ---- TTL level input with Schmitt-tigger. INts-27 ---- TTL level input with Schmitt-tigger and 27 n sec. glitch elimination. OD12 ---- Open-drain with 12mA sink current. O12 ---- Output buffer with 12mA drive/sink current I/OD12 ---- TTL level bi-directional pin, and open-drain output with 12mA sink current. I/O12 ---- TTL level bi-directional pin, and output with 12mA drive/sink current. I/O12-10k-up ---- TTL level bi-directional pin, and output with 12mA drive/sink current and 10K ohm pull-up resistor. Pin No. Pin name I/O Type Function 1 3VSB POWER Power Pin
2 GPIO3 I/O12 General Purpose I/O Pin, Default O/D
3 GPIO4 I/O12 General Purpose I/O Pin, Default O/D
4 VIDIN0 INtx Receive VID0 Signal from CPU
5 VIDIN1 INtx Receive VID1 Signal from CPU
6 VIDIN2 INtx Receive VID2 Signal from CPU
7 VIDIN3 INtx Receive VID3 Signal from CPU
8 VIDIN4 INtx Receive VID4 Signal from CPU
9 VIDIN5 INtx-100k-dn Receive VID5 Signal from CPU
10 GPIO0 I/O12 General Purpose I/O Pin, Default O/D
11 GPIO1 I/O12 General Purpose I/O Pin, Default O/D
12 GPIO2 I/O12 General Purpose I/O Pin, Default O/D
AME, Inc. Jumper Free Over Clock ControllerATXP6 Rev. A.01 n Pin Description Pin No. Pin Name I/O Type Function Description
13 SDA I/OD12 SMB Data Signal
14 SCL INts SMB Clock Signal
15 RSTOUT# OD12
16 GND GND GROUND Pin
17 SLOTOCC# INts-27 Receive SLOTOCC#From CPU
18 VBAT POWER Power Pin
19 VIDOUT5 OD12 VID5 Signal Output Pin to PWM
20 VIDOUT4 OD12 VID4 Signal Output Pin to PWM
21 VIDOUT3 OD12 VID3 Signal Output Pin to PWM
22 VIDOUT2 OD12 VID2 Signal Output Pin to PWM
23 VIDOUT1 OD12 VID1 Signal Output Pin to PWM
24 VIDOUT0 OD12 VID0 Signal Output Pin to PWM
25 GPIO7 I/O12 General Purpose I/O Pin, Default O/D
26 GPIO6 I/O12 General Purpose I/O Pin, Default O/D
27 GPIO5 I/O12 General Purpose I/O Pin, Default O/D
28 Test/ASEL INt-47k-up Address Select Pin
Table1. Pin Description Table
AME, Inc. ATXP6 Rev. A.01 Jumper Free Over Clock Controller n Electrical Characteristics AC Specifications Min Max FSMB SMBus Operating Frequency 10 100 KHZ TBUF Bus free time between Stop and Start Condition 4.7 µs THD:STA Hold time after (Repeated) Start Condition. After this period,the first clock is generated 4.0 µs TSU:STA Repeated Start Condition setup time 4.7 µs TSU:STO Stop Condition setup time 4.0 µs THD:DAT Data hold time 300 ns TSU:DAT Data setup time 250 ns TTIMEOUT Clock low time-out 25 35 ms TLOW Clock low period 4.7 µs THIGH Clock high period 4.0 50 µs TLOW:SEXT Cumulative clock low extend time (slave device) 25 ms TLOW:MEXT Cumulative clock low extend time (master device) 10 ms TF Clock/Data Fall Time 300 ns TR Clock/Data Rise Time 1000 ns Limits Symbol Parameter Units
AME, Inc. Jumper Free Over Clock ControllerATXP6 Rev. A.01 n Electrical Characteristics Timing Measurements
AME, Inc. ATXP6 Rev. A.01 Jumper Free Over Clock Controller n DC Specifications Electrical Characteristics of other pins symbol Description Min. Typ. Max. Unit VBAT Power 4.5 5 5.5 V 3VSB Power 3 3.3 3.6 V ViL Input Low voltage - - 0.8 V ViH Input High voltage 2.2 - - V VoL Output Low voltage - - 0.4 V VoH Output High voltage 2.4 - - V IoL Output Low current - 12 - mA Part Number Package Special Feature ATXP6 SSOP-28 Commercial Standard ATXP6G SSOP-28 Green Device with Commercial Standard n Ordering Information
AME, Inc. Jumper Free Over Clock ControllerATXP6 Rev. A.01 n Package Information SSOP-28 E c h x 45 ° DTEAIL A D GAUGE PLANE Detail A 0.25MM L R ZD A A1B0.10MM C e MIN MAX MIN MAX A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.004 0.010 A2 - 1.50 - 0.059 b 0.20 0.30 0.008 0.012 D 9.80 10.00 0.386 0.394 E1 3.81 4.00 0.150 0.157 e E 5.80 6.20 0.228 0.244 h L 0.41 1.27 0.016 0.500 P 0o 8o 0o 8o 0.380BASIC 0.015BASIC SYMBOLS MILLIMETERS INCHES 0.635BASIC 0.025BASIC
AME, Inc. ATXP6 Rev. A.01 Jumper Free Over Clock Controller SSOP-28 n Tape and Reel Dimension Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size SSOP-28 16.0±0.1 mm 4.0±0.1 mm 2500pcs 330±1 mm
Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. AME, Inc. , September 2007 Document: ATT-DSATXP6-A.01 Corporate Headquarter U.S.A. (Subsidiary) AME, Inc. Analog Microelectronics, Inc. 2F, 302 Rui-Guang Road, Nei-Hu District 3100 De La Cruz Blvd., Suite 201 Taipei 114, Taiwan. Santa Clara, CA. 95054-2438 Tel: 886 2 2627-8687 Tel : (408) 988-2388 Fax: 886 2 2659-2989 Fax: (408) 988-2489 www.ame.com.tw E-Mail: sales@ame.com.tw