ATV30C5V0-HF COMCHIP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Ideally for surface mount applications. - Easy pick and place. - Plastic package has Underwriters Lab. flammability classification 94V-0. - Typical IR less than 1μA above 10V. - Fast response time: typically less than 1nS for uni-direction, less than 5nS for bi-direction, from 0V to BV min. - Use in sensitive electronic protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Mechanical data - Case: JEDEC DO-214AB, molded plastic. - Terminals: solderable per MIL-STD-750, method 2026. - Approx. weight: 0.21 grams ATV30C5V0-HF Thru. ATV30C441-HF Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeter) AQW-JTV03 Notes: O 1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 C, per Fig. 1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Comchip Technology CO., LTD. Peak power dissipation on 10/1000μS waveform (Note 1) Peak pulse current on 10/1000μS waveform (Note 1) Steady state power dissipation at TL=75°C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load, uni-directional only (Note 2) Maximum instantaneous forward voltage at 100A for uni-directional only (Note 3) Operating junction temperature Storage temperature range Value UnitsSymbolCharacteristics PPP IPP PD IFSM VF TJ TSTG 3000 See Next Table 6.0 300 3.5/5.0 -55 to +150 -55 to +150 W A W A V DO-214AB (SMC) Rating at 25°C ambient temperature unless otherwise specified. Company reserves the right to improve product design , functions and reliability without notice. Halogen Free 0.242(6.15) 0.220(5.52) 0.124(3.16) 0.113(2.86) 0.316(8.02) 0.006(0.15) 0.008(0.20) 0.000(0.00) 0.059(1.51) 0.030(0.75) 0.102(2.59) 0.078(1.98) 0.276(7.02) 0.257(6.52) - Comply with AEC-Q101 - Polarity: Color band denotes cathode end .except Bipolar

RATING AND CHARACTERISTIC CURVES (ATV30C5V0-HF Thru. ATV30C441-HF) Comchip Technology CO., LTD. Page 2 REV:A SMD Transient Voltage Suppressor Company reserves the right to improve product design , functions and reliability without notice. Pulse Width,td ( μS ) 1001010.1 0.1 1.0 100 Peak Power, ( KW ) Ambient Temperature,TA ( O C ) Fig.1- Pulse Derating Curve 140 Fig.6- Typical Junction Capacitance 50 100 175150 100001000 25 125 100 120 Lead Temperature , TL (°C) Steady Power Dissipation, (W) 25 75 100 175 50 125 150 Number of Cycles at 60Hz Peak Forward Current , (A) 350 10 100 200 200 100 150 300 250 8.3mS single half sine-wave (JEDEC method) TJ=TJ , max. Peak Pulse Derating in Percentage of Peak Power or Current, ( % ) 10000 Junction Capacitance, (pF) 1000 100 10 100 10001 Reverse Breakdown Voltage,VBR (V) 100000 Bi-directional @zero bias Uni-directional @zero bias Uni-directional @VRWM Bi-directional @ VRWM TJ=25 f=1.0MHz O C Fig.5- Pulse Waveforem Peak Pulse Current, (%) Time, (mS) 0 1.0 4.0 100 3.02.0 Peak value TR=10us Half Value= IRSM TJ = 25°C td Pluse width(td) is defined as the point where the peak current decays to 50% of Ipp 10 / 1000 waveform μsec. as defined by R.E.A. (Ipp) Fig.3- Steady State Power Derating Curve Fig.4- Peak Pulse Power Rating Curve Fig.2- Max. Non-Repetitive Surge Current

Comchip Technology CO., LTD. Page 3 REV:A SMD Transient Voltage Suppressor VRWM VBR Min. IT IFSM RI @VRWM (V) (V) (V) (mA) (A)@8.3mS (V) (uA) Uni Bi ATV30C130J(B)-HF Absolute Maximum Rating (Ta= 25°C) Part No Electrical Characteristic (Ta= 25°C) Max. VC Marking CodeVBR Max. IPP(A) Company reserves the right to improve product design , functions and reliability without notice.

Comchip Technology CO., LTD. Page 4 REV:A SMD Transient Voltage Suppressor VRWM VBR Min. VBR Max. IT IFSM IR@VRWM (V) (V) (V) (mA) (A)@8.3mS (V) IPP(A) (uA) Uni Bi Part No. Absolute Maximum Rating (TA=25°C) Electrical Characteristic (TA=25°C) Max VC Marking Code 1) Suffix J denotes 5% tolerance devices. 2) Suffix B after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Note: Company reserves the right to improve product design , functions and reliability without notice.

Comchip Technology CO., LTD. Page 5 REV:A SMD Transient Voltage Suppressor o 120 Trailer Device Leader 10 pitches (min)10 pitches (min) D1 D2 D T C Direction of Feed Reel Taping Specification Index hole d E F B W P A B C d D D2D1 DO-214AB (SMC) SYMBOL A (mm) (inch) 1.969 MIN. 4.00 ± 0.10 330 SYMBOL (mm) E F P P0 P1 W W1 1.75 ± 0.10 0.069 ± 0.004 7.50 ± 0.05 0.295 ± 0.002 DO-214AB (SMC) Company reserves the right to improve product design , functions and reliability without notice.

Comchip Technology CO., LTD. Page 6 REV:A SMD Transient Voltage Suppressor Marking Code C XXX 1. C: COMCHIP PKG SMCC 3. XXX: Marking code(see Page.3~5) 4. : Cathod Band 2. : Package Standard Packaging Case Type 3,000 REEL ( pcs ) Reel Size (inch) REEL PACK DO-214AB (SMC) C D B A SIZE (inch) 0.320 (mm) 8.13

4.69 MAX

1.52 MIN

0.185 MAX

0.06 MIN

3.20 MIN 0.126 MIN B C D A DO-214AB(SMC) Suggested PAD Layout Company reserves the right to improve product design , functions and reliability without notice.