ATV06B5V0-HF COMCHIP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

-Epoxy: UL 94V-0 rate flame retardant. -Mounting position: Any. Note: 1. Non-repetitive current pulse per Fig. 5 and derated above TA=25°C per Fig.1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum. 3. VF<3.5V for devices of VBR <200V and VF <5.0V for devices of VBR >201V Peak power dissipation with a 10/1000μs waveform (Note 1) Peak pulse current 10/1000μs with a waveform (Note 1) Power dissipation on infinite heatsink at TL=75°C Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) Maximum instantaneous forward voltage at 50 A for unidirectional only (Note 3) Operating junction and Storage temperature range Parameter Symbol TJ TSTG, PPP IPP PD IFSM VF See Next Table -55 to +150 Value 3.5／5.0 600 5.0 100 Units Watts Watts A A V Comchip Technology CO., LTD. Company reserves the right to improve product design , functions and reliability without notice. Halogen Free -Polarity: Color band denotes cathode end except Bipolar.

REV:A Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Rating and Characteristics Curves (ATV06B5V0-HF Thru. ATV06B441-HF) Fig.4 Peak Pulse Power Rating Curve td, Pulse Width (μS) PPPM, Peak Power (KW) 0.1 1 10 100 1000 10000 0.1 100 Fig.1 Pulse Derating Curve O TA, Ambient Temperature ( C) Peak Pulse Derating in Percentage of Peak Power or Current, (%) 0 25 50 100 150 175 100 140 75 125 120 Mounted on 5mm×5mm copper pads Fig.5 Pulse Waveform t, Time (mS) IPPM, Peak Pulse Current (%) 0 1 4 100 125 2 3 td tr=10μS Pulse width (td) is defined as the point where the peak current decay to 50% of Ipp Peak value, IPPM Half value, IPP/2 10/1000μS waveform as defined by R.E.A. Fig.6 Typical Junction Capacitance Fig.2 Maximum Non-Repetitive Surge Current Number of Cycle at 60Hz IFSM, Peak Forward Surge Current (A) 100 10 100 8.3mS single half sine-wave (JEDEC method) TJ=TJ Max. Fig.3 Steady State Power Derating Curve O Lead Temperature , ( C) Steady State Power Dissipation, ( W ) 0 25 50 100 150 175 2.0 5.0 75 125 1.0 3.0 4.0 200 10000CJ, Junction Capacitance (pF) 1000 100 10 100 10001 VBR, Breakdown Voltage (V) Bi-directional @VRWM TJ=25°C f=1.0MHz @VRWM Uni-directional Uni-directional @zero bias Bi-directional @zero bias Company reserves the right to improve product design , functions and reliability without notice.

SMD Transient Voltage Suppressor AQW-JTV02 Page 3 REV:A Comchip Technology CO., LTD. VRWM VBR Min. VBR Max. IT IFSM IR@V RWM (V) (V) (V) (mA) (A)@8.3mS (V) IPP (A) (uA) UNI BI ATV06B160J(B)-HF 16.0 17.80 19.70 1 100 26.0 5 LP BP Part No. Absolute Maximum Rating (TA =25°C) Marking Code Electrical Characteristic (TA =25°C) Max V C 23.08 Company reserves the right to improve product design , functions and reliability without notice.

SMD Transient Voltage Suppressor AQW-JTV02 Page 4 REV:A Comchip Technology CO., LTD. Note: 1) Suffix J denotes 5% tolerance devices. 2) Suffix B after part number to specify bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. VRWM VBR Min. VBR Max. IT IFSM IR@VRWM (V) (V) (V) (mA) (A)@8.3mS (V) IPP(A) (uA) UNI BI Part No. Absolute Maximum Rating (TA =25°C) Electrical Characteristic (TA =25°C) Max VC Marking Code Company reserves the right to improve product design , functions and reliability without notice.

REV:A Comchip Technology CO., LTD. o 120 Trailer Device Leader 10 pitches (min)10 pitches (min) D1 D2 D T C Direction of Feed Reel Taping Specification Index hole d E F B W P A SMD Transient Voltage Suppressor B C d D D2D1SYMBOL (mm) (inch) 1.969 (min) DO-214AA (SMB) A SYMBOL (mm) E F P P0 P1 W W1 1.75 ± 0.10 0.069 ± 0.004 5.50 ± 0.05 0.217 ± 0.002 DO-214AA (SMB) Company reserves the right to improve product design , functions and reliability without notice.

Comchip Technology CO., LTD. Page 6AQW-JTV02 REV:A Standard Packaging SMD Transient Voltage Suppressor Marking Code C XX 1. C: COMCHIP PKG SMA SMB SMC A B C 3. XX: Marking code (see Page. 3~4) 2. ○: Package 4. : Cathod Band Case Type DO-214AA 3,000 REEL ( pcs ) Reel Size (inch) REEL PACK (SMB) Company reserves the right to improve product design , functions and reliability without notice. C D B A SIZE (inch) 0.220 (mm) 5.60

2.16 MAX

1.52 MIN

0.085 MAX

0.060 MIN

2.18 MIN 0.086 MIN B C D A DO-214AA(SMB) Suggested PAD Layout