ATS CK-COMPONENTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
E E–49 Dimensions are shown: mm Specifications and dimensions subject to change www.ckswitches.com 23 mar 17 ATS Series Anti-Tampering Switches Features/Benefits
- Normally closed function
- Vertical detect
- Reliable long time compression
- IP54
- Tape & reel
- RoHS compliant and compatible Typical Applications
- Smart meters
- Alarm systems
- Anti-tamper devices Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on the next page. For additional options not shown in catalog, consult Customer Service Center. Specifications FUNCTION: Momentary action. CONTACT TYPE: SPST Normally Closed. TERMINALS: Gullwing type for SMT. Mechanical SWITCHING FORCE: ≤ 2 N TRAVEL TO BREAK: 0,7 mm TOTAL TRAVEL: 1,1 mm Packaging Switches are delivered on continuous tape, in reels of 2,000 pieces Electrical GOLD SILVER MAXIMUM POWER: 0.2 VA 1 VA MAXIMUM VOLTAGE: 32 VDC 32 VDC MINIMUM VOLTAGE: 20 mVDC 20 mVDC MAXIMUM CURRENT: 10 mA 50 mA MINIMUM CURRENT: 1 µA 1 mA CONTACT RESISTANCE: ≤ 350 mΩ INSULATION RESISTANCE: > 1 G Ω DIELECTRIC STRENGTH: ≥ 250 Vrms Environmental GOLD SILVER OPERATING TEMPERATURE: –40ºC to +125ºC –40ºC to +85ºC STORAGE TEMPERATURE: –55ºC to + 125ºC –40ºC to +85ºC Process SOLDERING: Compatible with lead free reflow process NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . A T S L F2 D Contact Material
1 Silver
3 Gold Termination
LFS Lead free compatible. Silver Plated LFG Lead free compatible. Gold Plated G Switch Function NC Normally closed N C NEW Actuator 2 Soft actuator - height 3.20 mm Operating Force D 2 N detect
C C B B 3,0 + 1,0- 5,5 50,0 57,1 3,5 2,1 56,7 52,6 2 0,05 2 0,05 1,5+0,1 0 1,5 0,25 0,3 0,02 8 0,1 4 0,1 24 2 - 1 - 10 sprocket hole pitch cumulative tolerance 0.2mm - 2 - Carrier camber not to exceed 1 mm in 1000 mm - 3 - Dimension 6.25 and 4 measured on a plane 0.3 mm above the bottom of the pocket - 4 - Dimension 3.5 measured from a plan on the inside bottom of the pocket to the top surface of the carrier. - 5 - Angle is not marked : 3° Scrolling direction in assy machine SECTION C-C SCALE 2 SECTION B-B EDetect E–50 Dimensions are shown: mm Specifications and dimensions subject to change www.ckswitches.com 23 mar 17 ATS Series Anti-Tampering Switches NEW AA 56,1 51,0 51,01 1,0 7,3 0,15 8,3 0,65 0,3 1,9 0,2 3,2 0,25 4,1 D - 1 ATS 2D1G NC LFS D - 3 ATS 2D3G NC LFG MARKING PART NUMBER Recommended PCB layout 0,1 SECTION A-A