ATR7507V645XP28VDC ELMA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

ATR (Air Transport Rack) PRODUCT OVERVIEW Continuing to innovate in the manufacturing of ruggedized, modular, COTS systems platforms, Elma’s full line of convection and conduc- tion cooled ATR (Air Transport Rack) enclosures offer a standardized, cost effective solution for VME, VME64x, VXS, MicroTCA, cPCI and cPCI Express based applications. Available in 1/2, 3/4, 1 and 1 1/2 ATR tall long or tall short formats per ARINC 404A, ARINC 600 and IEEE 1101.10 specifications, the modular design concept allows for a wide range of customization options without the cost and lead time penalties associated with custom designs. The all-aluminum ATRs are made from punched and formed sheet metal and milled plates. A removable front panel allows I/O customization to exact application requirements and increased configurability. The ATR enclosures use electrostatic dust filters, honeycomb EMI filters and a narrow screw spacing to seal off every external seam to ensure compli- ance to MIL-STD-461D. The rugged designs meet the requirement for shock, vibration and structural integrity per MIL-STD-810F, MIL-STD- 167 and MIL-STD-901D. MIL-STD ■ MIL-STD-5400: General standard for Aerospace Electronic Equipment ■ MIL-STD-810F: Environmental Test Methods and Engineering Guidelines ■ MIL-STD-46IE: Requirements for the control of EMI Emissions and Suceptibility ■ MIL-STD-704E: Aircraft Electric Power Characteristics ■ MIL-STD-1275A: Characteristics of 28 Volt DC Electrical Systems in Military Vehicles APPLICATION EXAMPLES In addition to the full range of available case sizes, standard options include: 5-15 slot 6U x 160mm card cages,150-750 watt p ower supplies, 28VDC or 90-230VAC (440 Hz) input, up to 470 CFM cooling systems and configurable I/O. All Elma Electronic Inc, syste m platforms come fully assembled and wired offering a "turnkey" packaging solution. Elma’s ATR products incorporates Mil-grade components like Mil-38999 connector, integrated sensors, line filters, on/off and re set switches, LEDs, fuses, breakers, etc. Fan options include the use of full Mil-grade high altitude fan tray can operate under ex tremely harsh temperature conditions. Depending on applications specific equipments either commerial, industrial or Mil-grade power sup plies can be used.

STANDARD ATR CASE DIMENSIONS ATR Size Approx. Volume Width(W) Length(L1) Length (L2) Height (H) Front View Top ViewSide View Notes: Per ARINC characteristic 561 INS, the standard dimension ‘H’ = 7.62" may be increased to a maximum ‘H’ dimension of 10.625" (269.88mm) when necessary for equipment reasons. W +.14" (3.5mm)MAX L2+2.57" (65.28mm)MAX W W +.14" (3.5mm)MAX H +.063" (1.60mm)MAX Size Slots Backplane Width Height Depth Power Supply Weight (without boards) 1/2 ATR Tall, Long VME,VME64x,cPCI 123.95mm (4.9") 269.88mm (10.625") 498mm (19.6") 250 watts 5V@30A 3.3V@30A +12V@4A -12V@4A 17lbs. 3/4 ATR Tall, Short VME,VME64x,cPCI 190.5mm (7.5") 269.88mm (10.625") 320.5mm (12.62") 350 watts 5V@30A 3.3V@30A +12V@8A -12V@8A 22 lbs. 3/4 ATR Tall, Long VME,VME64x,cPCI 190.5mm (7.5") 269.88mm (10.625") 498mm (19.6") 350 watts 5V@30A 3.3V@30A +12V@8A -12V@8A 25lbs.

1 ATR Tall, Long

VME,VME64x,cPCI 257.05mm(10.12") 269.88mm (10.625") 498mm (19.6") 500 watts 5V@60A 3.3V@30A +12V@8A -12V@8A 33 lbs. 1 1/2 ATR Tall, Long VME,VME64x,cPCI 390.65mm (15.38) 269.88mm (10.625") 498mm (19.6") 700 watts 5V@80A 3.3V@60A +12V@8A -12V@8A 45 lbs. ATR ORDER NUMBER in3 liter3 ±.03in ±0.76mm ±.04in ±1mm in mm in mm H ATR PRODUCT SELECTION 28www.elma.com

MIL-STD-810F (Methods 501.3 & 502.3) MIL-STD-810F (Methods 501.3 & 502.3) MIL-STD-810F (Method 516.4) MIL-STD-810F (Method 514.4) MIL-STD-810F (Method 500.3) MIL-STD-810F (Method 507.3) MIL-STD-810F (Method 509.3) MIL-C-24643 MIL-STD-461D Tempest Temp, Operating Temp, non-Operating Shock Vibration Altitude, Operating Humidity Salt fog Wiring EMC -10º to +55ºC -30º to +85ºC 15 g 11ms 15 to 2,000 Hz at .1g2/Hz (RMS – 12G) 15,000 ft 0-95% non-condensing Limited Limited Toxicity MIL-STD-461D -55 º to +85ºC -55 º to +85ºC 25g 11ms 15 to 2,000 Hz at .1g2/Hz (RMS – 12G) 55,000 ft 0-95% non-condensing Conformal Coating 5% for 48 hours Limited Toxicity Tempest FAN FEATURES ENVIRONMENTAL SPECIFICATIONS PARAMETER I GRADE M GRADE APPLICABLE SPECIFICATION POWER SUPPLY FEATURES ■ Low Noise FM Control ■ Military Specification Compliance (MIL-STD-461C: EMI/RFI, MIL-STD704A, 1275A: Transients & Spikes, MIL-I-45208: Quality System) ATR PRODUCT OVERVIEW ■ High performance axial fan ■ Feathered edge for lower noise ■ High reliability ball bearings ■ Range: 80 - 350 CFM ■ Operating temperature: -10ºC to +70ºC ■ Per MIL-STD-461D meets EMI standards per FCC Part 15, Subpart J of Docket 20780, Class A & B radiated and conducted emissions, meets EMI standards per VDE Spec. 0871/6.78 for cat. A&B requirements ■ Isolated tachometer output-square wave output equal to two pulses per revolution Parameter Min. Typ. Max. Units Notes Input Characteristics

28 VDC Input Modules:

Steady State Input 18 28 50 VDC Input Spike Limit -600 +600 VDC 20ms,50W per MIL-STD704A -250 +250 VDC 100ms,15mJ per MIL-STD1275A Input Surge Limit: 100 VDC 60ms,0.5Wper MIL-STD1275A Overvoltage Shutdown 50 100ms Automatic Recovery Inrush Current 110 125 %IIN Steady state IIN 10ms EMI/RFI Characteristics; (MIL-STD-461D, Class A1b) Input Power Leads: Conducted Emissions CE03 MIL-STD-461D Conducted Susceptibility CS02 Radiated Susceptibility RS03 MIL-STD-461D Output Characteristics Load/Line Regulation 0.2% 0.5% VNOM LL to HL, NL to 10% 0.05% 0.2% VNOM LL to HL, 10% to FL Thermal Characteristics Efficiency 77 81 %

3/4 ATR PLATFORM, TALL/LONG ■ Backplane in VME/64x, cPCI, VXS, VPX or MicroTCA up to 7 slots ■ Vertical card mounting (top loading) 6U x 160mm ■ Up to 400 watts of power with 28VDC or optional AC input ■ Bottom patch panel offers access to P2 section of the backplane ■ Integral cooling with front-to-rear airflow ■ Mil-grade high-performance Ametek Rotron fan, capable of providing over15 CFM per slot at altitudes over 35000 feet and operating temperature of 55ºC to 85ºC ■ Integral cooling with front-to-rear airflow ■ Order Number: ATR7507V645XP28VDC ATR Products

1 ATR PLATFORM, TALL/LONG

■ Vertical card mounting (top loading) 6U x 160mm VME64x compliant ■ Backplane in VME/64x, cPCI, VPX, VXS, or MicroTCA, up to 8 slots ■ Standard 28 VDC Power Supply, 400 W ■ Measures 10.12" w x 10.62" h x 19.6" d ■ P2 and P0 backplane backside connector pins required ■ Minimum 2.0 inches required below the backplane (2.5 inches preferred) ■ Bottom patch panel offers access to P2 section of the backplane ■ Integral cooling with front-to-rear airflow ■ Indicator/I-O front panel ■ DC input connector, power on/off toggle switch, elapsed time meter and voltage indicators with voltage monitor ■ Front-mounted carrying handles and mouting hooks ■ Fan fail indicator and reset switch (optional) ■ Order Number: ATRCTL10OPNXVTNZ46U 1 1/2 ATR PLATFORM, TALL/LONG ■ Backplane in VME/64x, cPCI, VPX, VXS or MicroTCA in sizes up to 15 slots ■ Vertical card mounting (top loading) 6U x 160mm ■ Power Supply: 120 VAC or 28 VDC ■ Measures 15.38" w x 12" h x 19.6" d ■ P2 and P0 backplane backside connector pins ■ Bottom patch panel offers access to P2 section of the backplane ■ Integral cooling with front-to-rear airflow ■ AC input connector, power on/off toggle switch, elapsed time meter and voltage indicators with voltage monitor, status indicator I-O front panel ■ Front-mounted carrying handles and mounting hooks ■ Fan fail indicator and reset switch (optional) 30www.elma.com