ATG3G-35095-2.5BA YIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
YUECHUNG INTERNATIONAL CORP. 1 YYIICC ATG3G Series G P S & 3 G E x t e r n a l A n t e n n a s Product Number ： A T G 3 G - 3 5 0 9 5 - 2 . 5 B A 1. Picture
YUECHUNG INTERNATIONAL CORP. 2 YYIICC ATG3G Series 2. Electrical Characteristics Item Specifications GPS Antenna Dielectric Center Frequency 1575.42±3MHz Antenna Band Width CF±5MHz Polarization RHCP Gain 2dBic（Zenith） V.S.W.R ＜1.5 Impedance 50Ω Axial Ratio 3dB（max） LNA Gain 28±2dB Noise Figure ＜1.5dB V.S.W.R ＜2.0 Supply Voltage 2.2~5V DC Current Consumption ＜15mA 3G/GSM Antenna Frequency Range 806~960MHz/1710~2170MHz V.S.W.R ＜2.0 Polarization Linear Gain 2.5dBi Impedance 50Ω Mechanical Cable RG174 Connector SMA/MCX/FAKRA or others Radome Material ABS Mounting Method Adhesive Environmental Operating Temperature -40℃~+85℃ Relative Humidity Up to 95% Vibration 10 to 55Hz with 1.5mm amplitude 2hours Environmentally Friendly ROHS Compliant
YUECHUNG INTERNATIONAL CORP. 3 YYIICC ATG3G Series 3. Radiation Pattern GPS Antnna 3G/GSM Antenna
YUECHUNG INTERNATIONAL CORP. 4 YYIICC ATG3G Series 4. Drawing
YUECHUNG INTERNATIONAL CORP. 5 YYIICC ATG3G Series 5. Characteristics and Reliability Test Test Items Test Condition a nd Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop Height: 1.5 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability MIL-ST D-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test MIL-STD-202G, 211A, cond. E Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock
1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes)
Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Direct ive RoHS 2002/95/EC R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC
YUECHUNG INTERNATIONAL CORP. 6 YYIICC ATG3G Series 6. Note
6.1 This product specification guarantees the quality of our product
as a single unit. Please make sure that your product is evaluated and confirmed against your specifications when our product is mounted to your product.
6.2 The product will get free warranty for one year since the date
of purchase users operate in the correct way; users will have to pay cost of the materials and maintaining fee out of the condition. 6.3 Electrostatic sensitive device.Observe precautions for handling.