ATG4717-BP YIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
YUECHUNG INTERNATIONAL CORP. 1 YYIICC ATG Series GPS/GNSS External Active Antennas Product Number ： ATG4717-BP 1. Picture
YUECHUNG INTERNATIONAL CORP. 2 YYIICC ATG Series 2. Electrical Characteristics Item Specifications Antenna Center Frequency 1575.42±1MHz Band Width CF±5MHz Polarization RHCP Gain 2dBic（Zenith） V.S.W.R ＜1.5 Impedance 50Ω Axial Ratio 3dB（max） Dimension 25*25*4mm LNA Gain 28±2dB Noise Figure ＜1.5 Filter Insertion Loss ＜3dB Ex-band Attenuation 12dB@CF+50MHz/16dB@CF-50MHz Supply Voltage 2.2~5V DC Current Consumption 5~15mA V.S.W.R ＜2.0 Mechanical Cable RG174 Connector SMA/MCX or others Radome Material ABS Mounting Method Screw Environmental Operating Temperature -40℃~+85℃ Relative Humidity Up to 95% Ingress Protection IP66 (exclude cable outlet) Vibration 10 to 55Hz with 1.5mm amplitude 2hours Environmentally Friendly ROHS Compliant
YUECHUNG INTERNATIONAL CORP. 3 YYIICC ATG Series 3. Radiation Pattern
YUECHUNG INTERNATIONAL CORP. 4 YYIICC ATG Series 4. Drawing
YUECHUNG INTERNATIONAL CORP. 5 YYIICC ATG Series 5. Characteristics and Reliability Test Test Items Test Condition a nd Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop Height: 1.5 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability MIL-ST D-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test MIL-STD-202G, 211A, cond. E Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock
1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes)
Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Direct ive RoHS 2002/95/EC R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC
YUECHUNG INTERNATIONAL CORP. 6 YYIICC ATG Series 6. Note
6.1 This product specification guarantees the quality of our product
as a single unit. Please make sure that your product is evaluated and confirmed against your specifications when our product is mounted to your product.
6.2 The product will get free warranty for one year since the date
of purchase users operate in the correct way; users will have to pay cost of the materials and maintaining fee out of the condition. 6.3 Electrostatic sensitive device.Observe precautions for handling.